Ideas for Personal Halo Reach Armor & Weapons (Update)

Status
Not open for further replies.

WandererTJ

Well-Known Member
These are my plans for what I want to make.
This is a Custom Reach (multiplayer) based Spartan-II Build

Thumb-playermodel-HR.png
Reach Player Model 360° View: [video]http://vid296.photobucket.com/albums/mm193/WandererTJ/Halo/My%20Spartan/playermodel.mp4[/video]
th_Wandererplayermodel1-New.png th_M6H-Custom.png th_Emblem-HaloRampODST.jpg


Colors (Unless Otherwise Noted):
Primary: Olive Green
Secondary (Upper Body): Dark Grey/Black
Secondary (Lower Body): White
Under Armor / Undersuit: Black


Emblem/Insignia & Designations:
Spade: Red
Circle: Black
Star Point Tips x8: White
Call-Sign 1: W28
Call-Sign 2: AHNZ
Spartan Number: S-128 (Spartan-II)


Helmet: ODST UA/HESA-E w/Raised protrusions, Ridges and Vents
Model: Hugh Holder v2 Helmet with:
• Modifications:
- - • Halo-Reach ODST Upgrade
- - • Removed Side Vent Straps
- - • Dutch Stacked Double Side Vents
- - • Dutch Above-Visor Vents
- - • Dutch Raised Mohawk Ridge
- - • Dutch Raised Upper Side-Ridges (OPTIONAL)
- - - - (Dutch Raised Protrusions Modified to fit Attachments)
Material: Smooth Cast 320 plastic (Preferably)
Visor: Sharp Edges, 2-Piece Design or vacuformed
• Color: Black (Matte/Flat)
• Detachable or Retractable in some way
• Internal VISR Mode LEDs - Illuminate face (OPTIONAL)
- - • May use EL-wire around the visor's internal perimeter
• Secondary Screen with HUD details behind the Visor and the VISR LEDs
Attachments: UA/HESA-E
• UA = Up-Armored, forehead armor attachment
• HESA-E = Hardened External Sensor Array-External = HU/RS + CNM Combo =
- - • CNM = Command Network Module (Left Ear)
- - - - - • Working Camera in Front - Top Aperture (OPTIONAL)
- - - - - • LED (Green) on Front - Bottom Aperture (OPTIONAL)
- - - - - • LED (Cyan) on Side
- - - - - • No Connection Cables Visible, just the 2-Position Mount
- - • HU/RS-Torch = Hardened Uplink/Remote Sensor (ODST Flashlight - Above Right Ear)
- - - - - • Hardened Uplink LED (Cyan) next to connection cable
- - - - - • Working Torch (Flashlight)
Decals:
• Emblem/Insignia on the back side of the raised mohawk ridge
• Designation: "W28-AHNZ-•-S128" located on rear/lower brim of helmet below the mohawk
• Stripes: Either Black or White - currently undecided
Extras & Internal Components:
• Padding (Motorcycle Helmet Liner)
• Multiple Ventilation Fans (Cooling/Defog)
• Motorcycle Breath Deflector
• LEDs in the Dutch Above-Visor Vents (OPTIONAL)
• Possible LEDs on the back of the helmet (OPTIONAL) - See Longshot-X's build
• Detachable CBRN Breather Attachment (using Magnets)
• Long Lasting Batteries w/ battery housings.
• On/Off switches for electronics
• AI Chip Helmet Port
• AI Chip: Metal
- - • Thin Profile; Non-illuminated - Use Clear-Blue Plastic across hole for looks
- - • Gold SIM Card Interface
• AI Chip: Wired so that it turns on the fans and LEDs in the helmet when plugged in


Under Armor/Undersuit:
Still trying to think of how I want to approach this. I am a perfectionist, and the style of the undersuit is REALLY needed.
I might try to make rubber or foam pieces for the larger openings in the armor, especially for the stomach+lower back, inner thighs, neck-hole, and the arm-hole gaps around the chest.
I would consider getting a snowboard/skiing padded/protective suit to be used for the rest of the gaps in the armor.
Also, having something that will be able to cover the under side of my jaw/chin is a must.


Torso: Collar/Breacher
Specifications:
• Hardened Collar Plate - Hard Plastic, maybe w/ some metal
• Nylon Vertical Belt Strap w/ Metal Belt Buckle
• Shells Basket made w/ Metal & Plastic Components
• Need to find a way to mount M45 Shotgun to Back*** - Has anyone done this? - I think Longshot-X might have...
- - • Use Magnets
- - - - - • Make sure there is a thin piece of rubber on the external side of the armor to prevent the shotgun from scraping on the armor.
• Chest Base:
- - • Rigid/Hardened in most spots
- - • May do unhardened foam for stomach segment and under the arms
- - • Front separates from Back at the top via Lift Release Seat Belt Buckles
• Combat Knife: Mounted to Upper-Left Side of Chest
• Kukri Knife: Mounted Under-Left arm side of Chest
- - • Might Switch Placement of these knives with one-another
- - • Lower Knife might be eliminated
• Functional Hip Side Pocket Plates - These are hard pockets, right?
- - • I will keep bags of tea in one of the pockets... I don't drink tea.
- - • UNSC/ONI ID Card kept in opposite pocket.
• Secondary Colors of the belt will be white
Attachments:
• Type-3 Refraction Dissonance Modifier/Camouflage Module
- - - aka: Active Camo Armor Ability Module Back Attachment
- - - Cyan/Light Blue/White-ish LEDs
• Pistol Ammo Clips (x2) on Front Side of Belt (HP/Parafoil style)
- - • Removable Ammo Clips
- - - - - • Magazines will serve as storage compartments for extra batteries for the suit's electronics
- - • Functional Pockets in front of Ammo Clips
• Grenades (x2) on Back Side of Belt (Assault/Sapper style)
• Chest Pouch, Lower/Right Side Covering the Lower-Side LED (Tactical/Recon Style) (OPTIONAL)
• Custom detachable UA/Collar with upgraded collar.
Extras/Details:
• Separated Spine Plates
• Chest LEDs:
- - • Left Side of Breast (2, 1of2 is hidden when looking straight at chest)
- - • Either side of Breacher Shotgun Shells (1ea)
• Chest Decals:
- - • Personal Emblem/Insignia moved so the Collar does not cover it
- - • UNSC Emblem/Insignia moved so the Collar does not cover it
- - • 405th Decal (Left Shoulder Blade/Back)
- - • Call-Sign #1 "W28" on front/top of Collar
• Rear-Torso LEDs:
- - • Upper Side (1),
- - • Upper/Mid Sides (1ea),
- - • Lower/Outer Sides (1ea),
- - • Right-Side Spine (3)
- - • LEDs under the Separated Spine Plates for illuminated silhouettes
• Rear-Torso Decals:
- - • UNSC (Upper/Right)
- - • Red Caution Triangle (Upper/Right)
- - • Caution/Warning Label (Upper Middle Spine)
- - • "I Made This"
- - • "I <3 Sheila"
• Halo Reach Service Record Medals (OPTIONAL)
- - • Extermination (1)
- - • Perfections (3)
- - • Unfrigginbelievable (1)
- - • Skullamanjaro (1)


Upper & Lower Arms
Shoulders/Upper Arms:
• Base Upper Arm:
- - • Scaled properly, stretched if necessary
- - • Must hang at proper height on arm
- - • Will use upper garnish piece to attach armor to undersuit
- - • Reinforcements for the Shoulder Armor Mounts will likely mount through the Upper Arm Base
- - - - - • This way, the heavy shoulder pieces mount directly to the undersuit
- - • Outer Bicep LED (Cyan) (1ea)
• Right Shoulder: Commando
- - • Olive&Black w/white stripe
- - • Hidden Knife on Inner Side of the Large Shoulder Plate
- - - - - • Possibly a ballistic knife (appearance-wise anyways)
- - • LED inside shoulder to illuminate Inner Side of the Large Shoulder Plate
• Left Shoulder: CQC
Wrists/Lower Arms:
• Base Lower Arm:
- - • Must be proper size, stretched if necessary
- - • Must hang at proper height on arm
- - • May possibly be made of foam in order to handle muscle flexing
- - • LEDs (Cyan) on Lateral (Outer) Sides
- - • LED (Cyan) on Dorsal Side (by elbow)
• Right Wrist: Assault/Breacher (OR No Attachment)
• Left Wrist: Tactical/UGPS - Custom Up-Armored Variant
- - • If forearm's secondary color is black, use white (or vice versa)
- - • Opens so phone can be mounted within
- - • Modify: Use aspects from Tactical/Tacpad
- - - - - • LEDs (Green x2/x4?)
- - - - - • Display Screen: Blue tinted
Hands:
• Standard Hand Plates
• Might simply use fingerless ODST styled gloves
- - • May or may not add armor to the fingers


Legs/Greaves/Boots:
Upper Legs/Thighs:
• Right Thigh Attachment: Mount for Custom M6H Pistol (magnets)
- - • Add a rubber tip just above magnet on surface so pistol does not scrape on thigh
- - • Might possibly also try to fit a collapsed M7S attached as well
• Left Thigh Attachment: UA/NxRA Reactive, Non-Explosive Supplemental Armor
- - • LED (Green) at bottom
• Details:
- - • LEDs (Cyan x2ea) on Ventral/Front Side of thighs
- - • Decals:
- - - - - • Caution/Warning Label - Upper/Front Hip/Thigh (Right and Left)
- - - - - • Might do a stripe around the Right Thigh (see Emile) (OPTIONAL)
Knees Guards:
• FJ/Para (White)
Lower Legs/Shins:
• Standard Reach Style (White)
• Might do an ODST (Mickey) Breacher Shotgun Shell Wrap Attachment (OPTIONAL)
• Details:
- - • LED (x1ea) on Ventral/Front side of Shins at the bottom
- - • LED (x1ea) on Dorsal/Rear side of Shins near the bottom
- - • Decals: TBD
Boots/Feet Specifications:
• Divided into 3 Sections:
- - • Heel/Ankle-Rear Side Armor
- - - - - • Underfoot LED
- - • Foot Arch Front-Side Armor Plate
- - - - - • Caution Stripes Medial & Lateral Sides
- - - - - • LEDs Medial & Lateral Sides of each foot (See Vanity)
- - • Toe Boot Armor
• Will likely use a high-heeled or platformed design for height


Carried Weapons:
M45 (TS) Tactical Shotgun
• Mounted on Back
Suppressed M7/Caseless Submachine Gun (M7S SMG)
• Mounted/Connected to Shoulder Sling, (OR mounted with Magnum to right Thigh)
• Collapsable
Model 6H Personal Defense Weapon System (M6H-PDWS, Magnum Sidearm)
• Mounted on Right Thigh / Hip Holster
Kig-Yar Point Defense Gauntlet (Jackal Plasma Shield)
• Carried... or left in the car >.>
• Perhaps there might be a way to make this collapsible...

More Details on these weapons listed in Comments below........




Weapons for Custom Spartan Build:

Custom Halo 4 Pistol -- Model 6H Personal Defense Weapon System (M6H-PDWS, Magnum Sidearm)
• Nickle Finish
• Black Rubber Grip
• Dark Grey/Off-Black Handle (Forms two-tone scheme with the Grip)
• Barrel Slightly Beyond Flush with front end (Chrome)
• Removed Iron Sights (They are not on the standard M6H, but should still be noted just in case)
• Modified handle at the bottom so M6G clips/magazines can be used and so they sit flush (Bottom of Handle made flat)
- - - Removable magazine
- - - - - Batteries for electronics/LEDs mounted in Magazine
• Movable Slide (Painted: UNSC Green, Shell Release left unpainted (Nickle))
- - - Yellow LEDs (x2) on back end of Slide
- - - Red LED on back end of Slide (OPTIONAL: Otherwise paint it Red)
• Movable Trigger
- - - Connected to movable Slide (OPTIONAL)
• Movable Safety On/Off Switch
• KFA-2 x2 Scope, Top Attachment (Detachable) (Painted: UNSC Green, with faded Yellow band across the top)
- - - Red LED on front
- - - Grooves in Screws on the sides painted Red
- - - NOTE: The M6H KFA-2 attachment is physically larger than its M6G counterpart
• KFA-2 x2 Smart Linked, Bottom Attachment (Detachable) (Painted: Black)
- - - M6G (Reach) Styled with Red Dots on the sides
- - - Yellow LED on front
- - - Red LEDs on the sides
• SOCOM Muzzle Attachment (Detachable)
- - - with Chrome Barrel Tip
- - - with VnSLS/V-6E Bottom Attachment (Detachable)
- - - - - - White LED/Flashlight in the bottom section of the attachment behind a Lens
- - - - - - Chrome Tip
- - - - - - with rotating Dial/tuning grip
- - - - - - Red details painted on
• Sound Effect when trigger is pulled (cheesy?)
• BONUS: Can fire nerf darts (Just 1 is okay)


Halo 3: ODST Submachine Gun -- Suppressed M7/Caseless Submachine Gun (M7S SMG)
• Retractable butt
• Detachable Silencer/Suppressor
• Rotatable Forward Grip Handle
• Illuminated Red Reflex Sight
• Red LEDs on the side
• Flashlight under the barrel
• Shoulder Strap Attachment
• SMG Sound Effect when the trigger is pulled (cheesy?)
• BONUS: Ability to fire nerf darts. (Just 1 is okay)


Halo Reach Shotgun -- M45 (TS) Tactical Shotgun
• Special Extended Barrel Concept Model
• LEDs Galore
• Working Flashlight
• Working/Movable "Pump"


Jackal Plasma Shield -- Kig-Yar Point Defense Gauntlet
• Probably a Vacuformed piece of Plexiglass (or acrylic plastic)
• Rather than using LEDs, will probably just try to paint bits of red and blue in. Someone on the forums made one a while back, I will try to do my best to emulate their build. I can't remember what the wrist mount looked like in their build, but I found an HD image I could base it off of. I will likely turn the wrist mount into a hand grip since the Jackal shields probably could not have ever been worn by the larger Spartans, but surely they could hold them in their hands. If for whatever reason people freak out on me and say that they could never be used by a spartan, I will create a severed limb of a Jackal and attach the shield to the wrist of it and then proceed to hold onto the severed limb.... Yep.
#WinterContingency
 

Attachments

  • th_Emblem-HaloRampODST.jpg
    th_Emblem-HaloRampODST.jpg
    2.4 KB · Views: 396
  • th_M6H-Custom.png
    th_M6H-Custom.png
    13.1 KB · Views: 365
  • th_Wandererplayermodel1-New.png
    th_Wandererplayermodel1-New.png
    15.2 KB · Views: 429
  • Thumb-playermodel-HR.png
    Thumb-playermodel-HR.png
    75.3 KB · Views: 656
Special/Unique Upgrades​
Custom Reach ODST Helmet (Minus HU-RS Torch)
ReachHelmetAttachments-All-2.png

Helmet Attachment: HU/RS-Torch / HESA-E:
th_HURSTorchHelmetAttachment.jpg th_reach_7132411_Full.jpg

AI Chip Port:
th_AIChipPort.png

Possible Interchangeable GEN2 Components, Helmet - ODST Concept:
th_halo_4__odst_helmet_by_tekka_croe-d5kz3ic.jpg

Tactical/Recon Torso Attachment - Pouch:
th_Halo_reach_chest_armor_recon-Copy.jpg

Grenades (x2) on Back Side of Belt (Assault/Sapper style):
th_Assault-SapparRearBeltGrenades.jpg

HP-Parafoil Torso Attachment - Belt Pouches for M6G Ammo Magazines:
HP-ParafoilTorsoAmmoMagBeltPouch.jpg

Concept Thigh Version (Scratch Build) - Reach Concept Art Thigh (Male):
This will be in addition to the standard Reach thighs.​
th_ReachConceptArt-ConceptThigh.jpg

Custom Collar Upgrade (Detachable):
th_1project_galilean_by_dutch02-d3hbdrt.jpg

Shoulder-Knife (Frederick-104):
Will try to incorporate a modified version of this, hidden within Commando shoulder guard
It does appear as though a Commando shoulder could support a downward facing knife just like Fred-104 uses.
This is also similar to how Jun's knife is attached to his shoulder, but it adds the armor piece over it​
Shoulder-KnifeFred-HaloLegends-ThePackage.png
th_Shoulder-Knife-Fred-104-Halo-Legends-Frederic-104.jpg

M45 TS Shotgun - Concept Barrel:
th_haloreach_equipment_unsc_weapons_firearms_m45_tactical_shotgun_by_isaac_hannaford.jpg
 

Attachments

  • ReachHelmetAttachments-All-2.png
    ReachHelmetAttachments-All-2.png
    397.6 KB · Views: 2,395
  • th_Assault-SapparRearBeltGrenades.jpg
    th_Assault-SapparRearBeltGrenades.jpg
    7 KB · Views: 390
  • HP-ParafoilTorsoAmmoMagBeltPouch.jpg
    HP-ParafoilTorsoAmmoMagBeltPouch.jpg
    46.7 KB · Views: 445
  • th_ReachConceptArt-ConceptThigh.jpg
    th_ReachConceptArt-ConceptThigh.jpg
    6.8 KB · Views: 376
  • th_1project_galilean_by_dutch02-d3hbdrt.jpg
    th_1project_galilean_by_dutch02-d3hbdrt.jpg
    7.2 KB · Views: 357
  • Shoulder-KnifeFred-HaloLegends-ThePackage.png
    Shoulder-KnifeFred-HaloLegends-ThePackage.png
    233.3 KB · Views: 353
  • th_Halo_reach_chest_armor_recon-Copy.jpg
    th_Halo_reach_chest_armor_recon-Copy.jpg
    8.7 KB · Views: 3,022
  • th_halo_4__odst_helmet_by_tekka_croe-d5kz3ic.jpg
    th_halo_4__odst_helmet_by_tekka_croe-d5kz3ic.jpg
    5.6 KB · Views: 378
  • th_HURSTorchHelmetAttachment.jpg
    th_HURSTorchHelmetAttachment.jpg
    5 KB · Views: 311
  • th_reach_7132411_Full.jpg
    th_reach_7132411_Full.jpg
    6.7 KB · Views: 394
  • th_AIChipPort.png
    th_AIChipPort.png
    31.1 KB · Views: 432
  • th_Shoulder-Knife-Fred-104-Halo-Legends-Frederic-104.jpg
    th_Shoulder-Knife-Fred-104-Halo-Legends-Frederic-104.jpg
    5.5 KB · Views: 336
  • th_haloreach_equipment_unsc_weapons_firearms_m45_tactical_shotgun_by_isaac_hannaford.jpg
    th_haloreach_equipment_unsc_weapons_firearms_m45_tactical_shotgun_by_isaac_hannaford.jpg
    5.4 KB · Views: 292
I think I have decided to try out a foam build or a build that is partially foam and partially Resin/Pepped.
I don't have the patience to stay with cutting out pepakura templates, and it doesn't help that I don't have the steadiest of hands, so hopefully a foam-based build will work.

As things currently are, this project is on, but I am not in the phase of building my armor quite yet.

Phase 1: Burn body fat percentage down to 10-12%
- In the course of working towards this, i have lost 25 Lbs since 04-MAR-2014 :D
Phase 2a: Built up muscle and become fit.
Phase 2b: Find a level of fitness that I can easily maintain
Phase 2-BONUS: Run a Zombie 5K Marathon in October

Phase 3: Make awesome Halo Armor, Iron Man Armor, and finish the set of armor-grade medieval leather armor that I began working on long ago.


I think I will try to draw up some concepts of all the details I want to add to my armor soon.

EDIT: 2014-07-11: 31.25 lbs lost so far.
 
Currently my biggest holdup is not having a good pep model for the stomach/ab wrap for the Halo Reach Spartan model.

As for my armor build plan, it has changed slightly.
I'm not just going simply with an EVA foam build.
I intend to harden all the armor of the suit significantly.

As it stands, the ideas I have in mind are to use PVA on the outer sides of the foam and then use several layers of Polyurethane over it. Then on the inside, I've been thinking about applying Rondo to add additional support. But, I might just do PVA/Polyurethane on the inner side as well.

I am worried that the foam layer housed inside would be a negative influence on the hardened surfaces, in that, they could crack if I bumped into something. Then again, the foam might serve to better aid the resistance to cracks/damage.

I'm aware that I should be weary of the fact that certain things can eat the foam. I assure you all that I will keep it in mind.
 
I've been working on a 3D model for a custom designed helmet but I've hit some obstacles. The biggest obstacle is my lack of proficiency with Blender. The second biggest issue is lack of time.
If I find the time, I will try to make some progress using some other software or I'll sit down and work on learning how to use Blender as a last resort. I originally learned soft/mesh modeling in Lightwave3D, so I hope I can do what I intend to do in it.

I have been working on gathering tools and supplies for starting my 1st build, and I'm about halfway through.

Once I have everything I need and after I have constructed a duct tape dummy, I should be ready to work on scaling all the files out and preparing to make some cuts.

I might be going slow, but I want to take things slow and go one step at a time and not overwhelm myself.
I'm in no rush.
 
Just got all my supplies and tools in with the exception of the blades for my scalpel.
They only thing I haven't bought is craft foam, but that isn't really an issue since I can easily go out and buy it when I need to.
 
Update: Sorry all, still haven't started my build yet.

Still no mannequin, duct tape or otherwise.
Just been busy.

Got LASIK Eye Surgery yesterday, so that's the main part of my update. I'm excited!

I've been down at 162 lbs for a while now after losing ≈35-lbs from dieting, and I've recently picked up lifting.
Between work, working out, and just downtime to relax and play videogames, I haven't had much time to work on things.
Still trying to find someone that would be interested in assisting me with my projects.

Life is great though, feeling a lot more positive and enjoying my job more than I was a while back.
 
Life Update:
I have recently been selected as the Regiment Membership Officer for the Southwest Regiment of the 405th. Super cool!
I was nominated for the Commanding Officer position, which I had to turn down because it would command a lot of time I already don't have, but I was almost brought to tears for what other members had to say about me when I was nominated. I'm just really glad that I've been able to help the 405th in a positive way throughout my time here.

Career: Lost my job at the end of January, haven't had much motivation to search for a new one.
Been struggling with the fact that the only jobs I might enjoy are either in states far away from my family, or they are in a field that I didn't get a degree in and don't have the skills to do. Really wish I had found out what Industrial Design was before going through college and getting my engineering degree, seems like it is the perfect mesh of engineering and art.

Costume progress: Been struggling with anxiety a lot. Didn't realize it was my problem, but glad I found out about it.
I have 2 amazing friends who are helping me out, helping me conquer what seems to be the impossible:
The expectations I set for myself.
When you are so concerned with perfection, you can get lost in your thoughts, trapped, never capable of actually getting out and doing what you've been thinking of doing the whole time.
I've actually made forward progress to my costume. Still nothing physical to claim yet, but I've selected the files I will be working with, and I've measured my body and determined the scale for 2 pieces so far.

Another struggle I'm having is I partially don't want to take a job right now since I feel like if I do, it'll stop any progress I've made so far and put me back into a state of not being able to handle balancing relaxing and balancing being able to work on my costuming goals.

This is something I've wanted to do since 2010. It won't ever go away, and if I keep pushing it back, I will not be able to be happy with myself. I just hope I can finish this AND get a job before my funds run out.

Fitness: Since January, I've been weightlifting and bulking hard, I've gone from 162 lbs to about 168 lbs. Mostly muscle.
I've had a few off weeks sporadically due to a reoccurring shoulder injury, likely from pushing myself too hard.
Might end up cutting (fat weight loss) again and try to bring my weight back down while trying to maintain my muscles to tighten up my spartan figure ;).
I've managed to complete 10 pullups in a row without stopping, which is now my personal best. This is coming from being able to do zero in January, so I'm really happy with myself.
 
Status
Not open for further replies.
Back
Top