All Gears of War COG helmets ( noob/WIP- P.S: not including the holiday helmets) - 405th Infantry Division

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
All Gears of War COG helmets ( noob/WIP- P.S: not including the holiday helmets)

#1

08-07-2012, 10:13 PM

so i havent been making any props for about half a year now and really want to get back into it so i thought what better way then to make all of the gears helmets.

to my knowledge there are 8 COG helmets not including the holiday helmets.

all of the files used for this build were obtained on the 405th and i do not take any responsibility for the creation of the files though i do not know who exactly made them all

the list of helmets as of 8/9/12 is

the COG gear helmet from pre GOW 3 games ( far right)

Anthony Carmine's helmet ( far left)

Ben Carmine's helmet

Clayton Carmine's helmet

Recruit Clay Carmines Helmet

Redshirt COG helmet

the concept helmet for a Female Onyx Guard

and the COG elite Helmet which i have made already but plain on repainting and adding more detail to it

if i made a mistake with the names or pictures of these helmets PM me, ill be updating this thread heavy with pictures as much as possible, all comments are welcome.

Last edited by reedac56; 08-19-2012, 11:53 PM.
Tags: None

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#2

08-09-2012, 10:46 AM

working on the unfold for the clayton recruit helmet since there is no unflod of it yet, i am yet but just an amateur at unfolding to the peping part should be a bit sketchy, ill post the unfolded file anyway when im done unfldin it in case anyone wants to take a shot at it. cant say i didnt warn anyone though
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#3

08-09-2012, 11:40 AM

actualy now looking at this helmet unfold its to big for me to even try and unfold decently so ill just eave it up to the pro's this time, good luck to whoever figures it out.
Comment

Kyre

Infantryman
- Join Date: Apr 2011
- Posts: 200
#4

08-09-2012, 12:35 PM

I'm currently working on the Recruit Clayton helmet, when I have it unfolded I'll send you a link, mate.
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#5

08-09-2012, 11:22 PM

thanks man really appreciate it!
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#6

08-11-2012, 02:05 AM

working on peping the COG gear2 helmet, about half way . will post pictures when furthr along

Last edited by reedac56; 08-13-2012, 12:32 PM.
Comment

Kyre

Infantryman
- Join Date: Apr 2011
- Posts: 200
#7

08-12-2012, 11:22 AM

Here is the Recruit Clayton file, mate. The light and... pad things(?) on the right side of the helmet are nowhere to be found in the parts, but they'd be hard to pep, so you're better off hand-making them anyway man. This isn't best of unfolds, and I honestly stopped trying to put the parts on pages in a pattern, but it gets the job done. Have fun with it, mate!
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#8

08-12-2012, 07:25 PM

thanks man, no problem about the parts on the side i wasnt to worried about them iether and was just going to leave them out of it as well when i was trying to unfold it , thanks alot
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#9

08-12-2012, 08:25 PM

bout half way done on the Cog2 gear helmet in the peping faze, hopefuly get the rest or close to that done tonight

Last edited by reedac56; 08-13-2012, 12:32 PM.
Comment

Kyre

Infantryman
- Join Date: Apr 2011
- Posts: 200
#10

08-13-2012, 08:24 AM

One small note, the helmet you posted pictures of isn't Ben's helmet, that's a random Gear's helmet from Gears of War 3 mate. In your first post, the picture of the helmet farthest right (labeled COG2) is the helmet you just posted pictures of. If you need Ben's helmet file, I have the file if you want to save searching around mate.
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#11

08-13-2012, 11:43 AM

ah shit your right, i have been wondering that since there has been some controversy over witch helmet is ben's around the net. yeah that would be awesome if you could send that over.
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#12

08-13-2012, 09:02 PM

Done the peping for the gears of war cog helmet.

now going to move onto to ben carmine's helmet, printing it out tonight and hopfully get pretty far along with it by thursday

( middle)
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#13

08-15-2012, 10:38 PM

well photo bucket is being a dick so i cant post update pictures but i can say that i have gotten about halfway on the next helmet. picked up some bondo body filler and resin so going to start puting on the first of 2 or 3 coats of resin and then also start adding some detail to the cog elite helmet.
Comment

gingersnap
- Join Date: Sep 2012
- Posts: 2
#14

09-05-2012, 09:17 PM

Anybody have the file for onyx guard stuff. Really want to start but can't find any files for it
Comment

reedac56

Infantryman
- Join Date: May 2011
- Posts: 55
#15

10-30-2012, 09:23 PM

got alot more work done on the helmet i had peped

unfortunately what i had done on the peping of benjimen carmins helmet got thrown away at some point so im going to be restarting that or starting on a diffrent helmet soon after i get the detail work done on this helmet.
Comment

1

X