Halo 2 classic ODST build

[WylieCoyote074]

Ever since I played Halo 2 I've loved the ODST design, honestly more than the 3 and 2A design, so I've decided to make it my first full armor build. I'm a very vision oriented guy, especially when it comes to designs that have a lot details that are up to interpretation, so I'm going to attempt to build the entire thing from scratch. I will be taking some design liberties. Wish me luck!

For the color scheme, I wanna do a desert stealth vibe like the black sands coating (pictured below)

Here are the reference pics I took using the blind skull on delta halo as well as the first being a pic I found online:

So far I have most of the chest prototyped out of cheap Eva foam gym mats. It's mostly proportionate but has some fitment issues

It's held together with cable ties for easy disassembly and modification.

I managed to get it fitted, but still need a proper rigging system to take it on and off. I plan on using a Velcro system on the final model so I can pull it however tight I need it. Overall I'm pretty happy with it. It only took me a few hours so I should have it fully prototyped by the end of the week, so I can start building it out of higher quality foam.

Next I'll start on the hip and crotch plates. I'll try my best to keep this thread updated, but I can be a bit scattered brained so my apologies in advance

 

[IMP3RIOUS]

Hi and welcome!!!

Great start on your build! Best of luck and any questions, i'm sure you'll be able to find a lot of useful information here and plenty of people happy to jump in and help out!

 

[WylieCoyote074]

Hi and welcome!!!

Great start on your build! Best of luck and any questions, i'm sure you'll be able to find a lot of useful information here and plenty of people happy to jump in and help out!

Thanks a bunch man!

 

[WylieCoyote074]

Finished the back armor. It's not as accurate as I'd like it to be, but I'll try to fix that come prototype 2 or the final model.

 

[Skidmorpheus]

Nice start! Looks like Planet inspired you! There is also a JoyRide Halo 2 figure of the ODST you may be able to find more source pictures there. Sometimes the figures had more detail than the older game models.

 

[WylieCoyote074]

Nice start! Looks like Planet inspired you! There is also a JoyRide Halo 2 figure of the ODST you may be able to find more source pictures there. Sometimes the figures had more detail than the older game models.
View attachment 344145
View attachment 344146

Oh definitely lol

I didn't even think of the joyride figure. That's a great idea

 

[WylieCoyote074]

Made a prototype for the hip and crotch plates. I think having it loop into the belt is the most straightforward and maneuverable way to go about it. They'll be a little looser come the final model of course, but it shows the idea I'm going for

 

[WylieCoyote074]

Helmet prototype, using the DFT helmet as a base. It's rough but it serves its purpose. The silhouette is really strong, it just needs a less exaggerated jaw and some extra detail.

I put some tin foil in it just to see what it would look like with a visor

Next up is shins and boots, then it's on to the final build!

 

[Jomgee]

Lookin good! clever use of zipties

 

[SigmaProps]

Looking great so far Wylie! Was pleasure meeting you at Planet, nice to see the work you're putting in right after joining!

 

[WylieCoyote074]

Lookin good! clever use of zipties

Thanks! I'm pretty proud of myself for that one

 

[WylieCoyote074]

Looking great so far Wylie! Was pleasure meeting you at Planet, nice to see the work you're putting in right after joining!

Likewise man! I'm definitely on an inspiration high

 

[WylieCoyote074]

I ended up making another practice helmet. I plan on making a third to get the top part right before moving on to the final build but the side profile ended up very strong

 

[DireRaven]

Looks great man !

 

[blafftat]

Woah you really improved the helmet especially the silhouette. The only thing I could say is to try to refurbish it a bit like making it seem more neat and put together.

 

[WylieCoyote074]

Woah you really improved the helmet especially the silhouette. The only thing I could say is to try to refurbish it a bit like making it seem more neat and put together.

Don't worry, that's on the agenda lol. The final build will use much higher quality foam and contact adhesive instead of hot glue. I'm just trying to get a feel for how it all goes together

 

[Parzival]

Looking good on the progress! Ride that post con motivation! After joining up late last year, keeping the motivation was the tough part to keep my Sean Bradley ODST suit going. I like the rough layout you're doing for the chest and back, getting it made even if rough to redo or clean up later isn't too bad for the sake of learning and staying motivated.

Looking forward to seeing another H2 ODST build! Keep up the good work

 

[Jomgee]

Thanks! I'm pretty proud of myself for that one

Be very proud of what you're doing! Only up from here man.