Noble 4 Emile build (Pic Heavy)

Status
Not open for further replies.

howaado

Active Member
Hello all, I started work on this build about 3 months ago and figured i should post some of my progress on it. I started with the reach Eva helmet by "L3X BLU3R1V3R" made 2 of them the first which was too big, the second was not completed after trying the "Chevysrule" helmet file both were left unfished due to incorrect scaling. I recently pepped the "jtm1997" Eva helmet at correct scale. I have also pepped the "Chevysrule" Attachment for the Eva helmet leaving some details out which will be added in later using foam or other materials. The torso v2, kukri and shoulders are L3X BLU3R1V3R's files, the forearms and handplates were made using Ruze789's files, and the belt is Zero2o2's file. Everything will be made from foam except for the kukri, helmet w/attachment, grenades, and gun. For the visor I have bought a gold tinted bubble visor, the grenades and shotgun shells will be made using PvC pipe filled with expanding foam, and I have about 20-30ft of webbing and an assortment of different buckles to strap everything together. My goal date for having this costume 100% complete is the end of July.

Click to enlarge photos.

th_IMG_0371.jpg th_IMG_0372.jpg th_IMG_0378.jpg th_IMG_0380.jpg th_IMG_0381.jpg

th_IMG_0383.jpg th_IMG_0385.jpg th_IMG_0384.jpg th_IMG_0386.jpg th_IMG_0389.jpg

th_IMG_0391.jpg th_IMG_0396.jpg th_IMG_0394.jpg th_IMG_0398.jpg th_IMG_0401.jpg
 
could you post picks of this bubble visor?

nice start. thanks for posting about the attachment. didnt even know it exsisted :/
 
Yea I got it off ebay, th_IMG_0414.jpg th_IMG_0414.jpg
 

Attachments

  • th_IMG_0414.jpg
    th_IMG_0414.jpg
    4.8 KB · Views: 236
Can't wait to see how this turns out, do you plan on carving the skull into the visor

Yes, I will most likely use the sanding drum bit for my rotary tool to carve the detail.
I have some progress on the kukri, layered 6 pieces of mat board for both the hand guard and the blade using the pep file as a template. Click to enlarge images.

th_IMG_0410.jpg th_IMG_0417.jpg th_IMG_0420.jpg

th_IMG_0425.jpg th_IMG_0422.jpg th_IMG_0428.jpg
 
I recognize those gloves. I use the exact same gloves in my build.

Your foam chest looks great. Excellent building.
 
Thanks for all the comments.

Minor update, I have the belt assembled, but ran out of foam so I'll have to order more. The knife is almost completely built, just need to make the handle, sharpen the blade, smooth the hand guard, and attach the last piece to the sheath. The knife stays in the sheath by 4 small disk magnets, 2 on the back side of the blade and 2 on the inside of the sheath, they were super glued on then the gap was filled with hot glue. All the jagged edges were sanded smooth and sealed with super glue to prevent any tearing. Click to enlarge photos.

th_IMG_0404.jpg th_IMG_0405.jpg th_IMG_0434.jpg th_IMG_0436.jpg

th_IMG_0441.jpg th_IMG_0453.jpg th_IMG_0459.jpg th_IMG_0462.jpg th_IMG_0464.jpg

th_IMG_0467.jpg th_IMG_0468.jpg th_IMG_0471.jpg
 
Update: knife has been smoothed and sharpened and needs handle, shoulders are done except for attachments, and thighs are finished. Files used Rundowns shoulders and ForgedRecalimer's HD thighs. Click to enlarge photos.

th_IMG_0479.jpg th_IMG_0484.jpg th_IMG_0486.jpg th_IMG_0490.jpg

th_IMG_0506.jpg th_IMG_0504.jpg th_IMG_0510.jpg th_IMG_0512.jpg

th_IMG_0520.jpg th_IMG_0525.jpg th_IMG_0528.jpg
 
Man this really look good, you definatly have this foam building stuff down pack, great build so far can't wait to see this finished
 
dang this is awesome man, keep up the fantistic work :D and really can't wait to see more
just amazing!!!!!!!!!!! :D
 
Update for my build, both shins and shoulders are done. Thin foam was used for some of the raised detail that was left out in the pep files. Just need to find a better method to attach the shoulders to the biceps, I had tried 2 Chicago screws for the right shoulder attaching it to the front and back of the bicep but it didn't stay tight enough and kept swiveling and loosened up. I was hoping to avoid making the piece permanently attached to allow for interchangeable shoulders. If anyone has any tips I would appreciate it. Now to start working on the knees and torso padding. Click to enlarge photos.

th_IMG_0540.jpg th_IMG_0547.jpg th_IMG_0550.jpg th_IMG_0553.jpg th_IMG_0557.jpg

th_IMG_0559.jpg th_IMG_0567.jpg th_IMG_0562.jpg th_IMG_0570.jpg th_IMG_0580.jpg
 
Well, its been quite a while since i posted for my build. Since I have picked up more shifts at work my time working on this has decreased along with working on a halo 3 mkV helm for a friend of mine, but i have made some progress. I have gotten my knees and almost both ankles done, redoing the chest piece, now making the v3 torso. I have gotten a new corded rotary tool that has tons more power compared to my wireless one and was only $10 its a black & decker RTX-B, just received the tactical pouch, 20ft of webbing, all the buckles I should need, some airsoft shotgun shells, and should be receiving a 6 shell holder on the 4th of May. Also started making the handle of the kukri and will have to paint the shotgun shells black.

th_IMG_0590.jpg th_IMG_0594.jpg th_IMG_0597.jpg th_IMG_0601.jpg th_IMG_0604.jpg

th_IMG_0606.jpg th_IMG_0610.jpg th_IMG_0614.jpg th_IMG_0616.jpg

th_IMG_0621.jpg th_IMG_0622.jpg th_IMG_0626.jpg th_IMG_0629.jpg
 
Status
Not open for further replies.
Back
Top