Jimmy Da Moose presents- Captain America's Shield!

[Jimmy Da Moose]

Okay boys and girls, prepare for a wall of text. I'm sure many of you know that I'm building an ODST by now. Well, I'm almost done with it, so I figured I start a special side project.

It's special because if it turns out well, I'm giving it to my girlfriend for out second anniversary in a few weeks. I'm going to put a lot of work into finishing it quickly.

First- I noticed there are only a few models for the captain's shield, and I'm not a huge fan of them, so I decided to make my own! Now, I'm not a 3d modeler by any means, but it's such a simple model I figured I'd have a go. And it turned out well in my opinion.


Second- I'm fairly good at unfolding, but the problem is, I don't have a password for Designer, so I can't save my unfolds, which is unfortunate if I need to do it again...


Third, and most important- I pepped it already, but I need your opinions! It looks much too big.

(Yes, my hair is blue)

Marvel quotes it at being 30 inches wide, but it's huge. The movie version doesn't look quite this size, so I don't know if I should re-pep it. I started unfolding it again right now, and I gave it a 24 inch diameter.

What does the 405th think? Do I do it again, or do I keep this massive beast?

Also, I'll feel I have to give back to the forums, who have always been so kind and helpful, so I'll upload the model later.

[KingRahl]

Chris Evans in the movie is only 6ft 1/2inch tall. They were trying to make him look like he's huge. So a 30 inch shield (2 1/2 foot) would have been almost half his size.

So the question is do you want it "Marvel" quality or Movie quality?

I personaly would go with the smaller of the 2 if I carried it but would take the 30 inch and hang it on the wall.

[Jimmy Da Moose]

I think I have to agree, plus, my girlfriend is only like 5ft 4in, and she would probably like a prop that doesn't dwarf her. I should have the new shield complete by Sunday.

[Jimmy Da Moose]

I wanted to have the new pep finished by Sunday, but I've been busy with school, so I'm two days late. Oh well, I still have some time to finish it.



This one is smaller and looks much more proportional. The pep went together a lot easier, and the are almost no wrinkles in it. I'm gonna resin and fiberglass it by tomorrow night. Hopefully I'll have a good update by Friday.

[Jimmy Da Moose]

Yay! Updates!

I have been doing a lot of work to this shield, and I've posted no progress, so here is a week old one and the most recent one:




I really just have to get the corners cleaned out, and the outside edges smooth, then I can at least prime it and see whats left. I still have to figure out the handle, too, but I have some ideas.

[J326]

that is looking neat!. also if you don't mind cutting into your work you could try drilling holes and putting screw bolts in and then bondo over them. or mighty putty screw bolts on the inside.

[Jimmy Da Moose]

I think I may mighty putty some bolts on the inside, I think they might be a pain to cover from the front.

[Vigilnt sniper]

looking good Jimmy long time no speak.

[Jimmy Da Moose]

Thanks man. I didn't mean to go dark, but schools really been keeping my busy, and my time is split between this shield and my armor. On the plus side, I may be working in a prop shop!

[BLACKULA727]

Looks great Jimmy!