harley quinn's gun (finished)
i used 3 types of tubes , an empty tape cardboard tube and a cardboard cap
a corrugated cardboard tube for details
a large tube for the cannon
fitting test on the gun grip
hotglued together
i "painted" a coat of white glue on the tube to secure it
hotglue didn't work so i used some superglue
i did a base paint and , since it looked weird i superglued a curved piece of cardboard
i used some "wall body filler" wich is quite easy to apply
and did the final paintjob , i used grey , white , red and brown , and then a final coat of white glue to seal everything up
and one final tip , when you try to do something to look out of wood (in this case the handle) do this
do a thick layer of glue , leave it alone for about a minute , then with a sharp pencil , do random lines from the top to the bottom , and do so several times , when its dry it will look like wood , do the paintjob you wish and do a thin protective coat of white glue
ok , please tell me what you think , there's more to come !