Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: All Gears of War COG helmets ( noob/WIP- P.S: not including the holiday helmets)

  1. #1
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55

    All Gears of War COG helmets ( noob/WIP- P.S: not including the holiday helmets)

    so i havent been making any props for about half a year now and really want to get back into it so i thought what better way then to make all of the gears helmets.

    to my knowledge there are 8 COG helmets not including the holiday helmets.

    all of the files used for this build were obtained on the 405th and i do not take any responsibility for the creation of the files though i do not know who exactly made them all

    the list of helmets as of 8/9/12 is

    the COG gear helmet from pre GOW 3 games ( far right)



    Anthony Carmine's helmet ( far left)



    Ben Carmine's helmet



    Clayton Carmine's helmet



    Recruit Clay Carmines Helmet



    Redshirt COG helmet


    the concept helmet for a Female Onyx Guard


    and the COG elite Helmet which i have made already but plain on repainting and adding more detail to it



    if i made a mistake with the names or pictures of these helmets PM me, ill be updating this thread heavy with pictures as much as possible, all comments are welcome.
    Last edited by reedac56; 08-19-2012 at 11:53 PM.
    Dark Arms Studio Club based in PA right outside of philly.

  2. #2
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    working on the unfold for the clayton recruit helmet since there is no unflod of it yet, i am yet but just an amateur at unfolding to the peping part should be a bit sketchy, ill post the unfolded file anyway when im done unfldin it in case anyone wants to take a shot at it. cant say i didnt warn anyone though
    Dark Arms Studio Club based in PA right outside of philly.

  3. #3
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    actualy now looking at this helmet unfold its to big for me to even try and unfold decently so ill just eave it up to the pro's this time, good luck to whoever figures it out.
    Dark Arms Studio Club based in PA right outside of philly.

  4. #4
    Join Date
    Apr 2011
    Location
    Thornton, Co, USA
    Posts
    200
    I'm currently working on the Recruit Clayton helmet, when I have it unfolded I'll send you a link, mate.
    War isn't about who isn't about who's right- it's about who's left!
    You should check out my props page!

  5. #5
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    thanks man really appreciate it!
    Dark Arms Studio Club based in PA right outside of philly.

  6. #6
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    working on peping the COG gear2 helmet, about half way . will post pictures when furthr along
    Last edited by reedac56; 08-13-2012 at 12:32 PM.
    Dark Arms Studio Club based in PA right outside of philly.

  7. #7
    Join Date
    Apr 2011
    Location
    Thornton, Co, USA
    Posts
    200
    Here is the Recruit Clayton file, mate. The light and... pad things(?) on the right side of the helmet are nowhere to be found in the parts, but they'd be hard to pep, so you're better off hand-making them anyway man. This isn't best of unfolds, and I honestly stopped trying to put the parts on pages in a pattern, but it gets the job done. Have fun with it, mate!
    War isn't about who isn't about who's right- it's about who's left!
    You should check out my props page!

  8. #8
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    thanks man, no problem about the parts on the side i wasnt to worried about them iether and was just going to leave them out of it as well when i was trying to unfold it , thanks alot
    Dark Arms Studio Club based in PA right outside of philly.

  9. #9
    Join Date
    May 2011
    Location
    Horsham/Amlber Pennsylvania
    Posts
    55
    bout half way done on the Cog2 gear helmet in the peping faze, hopefuly get the rest or close to that done tonight




    Last edited by reedac56; 08-13-2012 at 12:32 PM.
    Dark Arms Studio Club based in PA right outside of philly.

  10. #10
    Join Date
    Apr 2011
    Location
    Thornton, Co, USA
    Posts
    200
    One small note, the helmet you posted pictures of isn't Ben's helmet, that's a random Gear's helmet from Gears of War 3 mate. In your first post, the picture of the helmet farthest right (labeled COG2) is the helmet you just posted pictures of. If you need Ben's helmet file, I have the file if you want to save searching around mate.
    War isn't about who isn't about who's right- it's about who's left!
    You should check out my props page!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •