File it under Crimmson

Status
Not open for further replies.

Crimmson

Well-Known Member
I felt it was time to update this post. there is more files in here some of which I have made and some that I have found perusing the internet. you can use my models as you see fit, change them if you want no problem just give credit. thanks

here is everything I have been able to acquire
destiny titan early concept http://www.mediafire.com/?wjb9nt09p8b37bh n7 stuff
http://www.mediafire.com/view/1qsg1psd1f0ho2b/n7all.obj

reach
emile kukri
http://www.mediafire.com/download/qf...e%20kikuri.pdo
haunted pilot helmet
http://www.mediafire.com/download/qj...l%20helmet.pdo
visor http://www.mediafire.com/download/z6...20gauntlet.pdo

halo 4

http://www.mediafire.com/download/eh...e%20models.rar

http://www.mediafire.com/view/aowb61...orm_marine.obj

http://www.mediafire.com/view/grb5x9...EF%20SCOUT.obj

http://www.mediafire.com/view/q0t7hzytrl54x43/mc4.obj

http://www.mediafire.com/view/ueppbymh2c2spwb/lasky.obj

http://www.mediafire.com/download/3cn350lbutpr5rl/halo+4+mantis.obj

http://www.mediafire.com/view/67uh5r...04%20elite.obj


stuff I modeled or worked on
h3 odst romeo helmet with goggles mesh welded
hd pdo link:
http://www.mediafire.com/download/6r...elmet%20HD.pdo

ld pdo link:
http://www.mediafire.com/download/61...elmet%20LD.pdo

h4 boot solid
http://www.mediafire.com/download/og...20%20foot2.pdo

h4 mk6 gen 2 unfolded
http://www.mediafire.com/download/kr...and_unfold.pdo

h4 ricochette armor unfolded by zeroprime
Ricochet Chest Piece

h4 air assault early
http://www.mediafire.com/download/51...t_crimmson.pdo

deathstroke armor
http://www.mediafire.com/view/abfw2l...roke_armor.obj

http://www.mediafire.com/view/3g2lr2...0packs%202.obj
promethean rifle file.
http://www.mediafire.com/?btlwh57ib58wm35

emblems
odst emblem
http://www.mediafire.com/view/5c12oe...dst_emblem.obj

h4 stuff
aviator shoulder
http://www.mediafire.com/view/3740ai...r_shoulder.obj
aviator chest
http://www.mediafire.com/view/8sz11d...ator_chest.obj
eod chest
http://www.mediafire.com/view/8cww5w..._eod_chest.obj
h4 mk5
helmet http://www.mediafire.com/view/w4snb9...4_MK5_HELM.obj
chest complete http://www.mediafire.com/view/o2x0x4...q31/h4_mk5.obj
chest split http://www.mediafire.com/view/fc1ufv...st_no_belt.obj
shoulder http://www.mediafire.com/view/98f5y8...5_shoulder.obj
gauntlet http://www.mediafire.com/view/58q8sq...H4_MK5_ARM.obj
hand plate http://www.mediafire.com/view/lre8rc...HAND_PLATE.obj
finger plates http://www.mediafire.com/view/aalxxx...GER_PLATES.obj
cod http://www.mediafire.com/view/u1blxt...H4_MK5_COD.obj
cod split http://www.mediafire.com/view/2fkpzs..._COD_SPLIT.obj
thigh http://www.mediafire.com/view/9meb3s...HIGH_ARMOR.obj
shin http://www.mediafire.com/view/5acx54...SHIN_ARMOR.obj
boot http://www.mediafire.com/view/n638nz...BOOT_ARMOR.obj
h4 stalker
http://www.mediafire.com/view/s1mng8...KER_CHEST2.obj
http://www.mediafire.com/view/4eay6ua4vl1cb14/H4_STALKER_HELMET.obj
http://www.mediafire.com/view/ndgllo...R_SHOULDER.obj
h4 gungnir
http://www.mediafire.com/view/jm8r2c...GNIR_CHEST.obj
http://www.mediafire.com/view/luu37p...NIR_HELMET.obj
http://www.mediafire.com/view/ndgllo...R_SHOULDER.obj

h4 commando
http://www.mediafire.com/view/4i1r48...ANDO_CHEST.obj
http://www.mediafire.com/view/lwaw56...NDO_HELMET.obj
http://www.mediafire.com/view/27q74j...O_SHOULDER.obj
h4 commando
http://www.mediafire.com/view/jdmkf9...DER_HELMET.obj
http://www.mediafire.com/view/vdp1x9...NDER_CHEST.obj
h4 recon
http://www.mediafire.com/download/m7...econ+chest.obj
http://www.mediafire.com/view/7azb3o...con_helmet.obj
chest http://www.mediafire.com/download/58ad38mkd5dq9ul/h4_recon_chest_remodel_and_unfold-Crimmson.pdo

99% of these aren't unfolded as I don't have the hang of it yet.
copy right bungie, 343, microsoft
 
Last edited by a moderator:
Very impressive. Hope to see you do the whole model. I would love to build this as an armor set.
 
continued....
odst concept
http://www.mediafire.com/?8d9ntcr6guam95m
http://www.4shared.com/file/zn7OD6bT...t_final2.html? unfolded by death angel
reach
Jorge chest mesh welded with all of the parts on it
http://www.mediafire.com/view/2oywq1...ge%20chest.obj
cod http://www.mediafire.com/view/317wnb...orge%20cod.obj
back pack http://www.mediafire.com/view/kf7igb...e_backpack.obj
jorges turret http://www.mediafire.com/view/px71kj...rret_jorge.obj
h4 marine
chesthttp://www.4shared.com/file/GeSEGi6g...e_Chest_2.html unfoled by s323
Foam Unfold: http://www.4shared.com/file/XVMtmB3X..._2__foam_.html unfolded by s323
http://www.4shared.com/file/kbPDECUh...lmet__upl.html
helmet http://www.4shared.com/file/kbPDECUh...lmet__upl.html unfolded by s323
new unfold http://www.4shared.com/file/eYMW8ycp...lmet__upl.html
chest 2 http://www.4shared.com/file/ifoZ42pU...ine_chest.html unfolded by s323
foam unfold http://www.4shared.com/file/K3dUuKof...est__foam.html unfolded by s323
half helmet http://www.mediafire.com/view/gu9cpa...in%20strap.obj
back pack http://www.mediafire.com/view/kl6t3b...20back%202.obj
face mask http://www.mediafire.com/view/vrsjrl...ace%20mask.obj

h4 weapons
h4 and reach knives
http://www.mediafire.com/download/u6...4%20knives.pdo
dmr
http://www.mediafire.com/view/mfmoim...a/H4%20DMR.obj
incinerator cannon
http://www.mediafire.com/view/t84q3h...NCINERATOR.obj
sniper
http://www.4shared.com/file/6OVOELAx...er_rifle.html?
br
fixed x7

http://www.mediafire.com/download/bn...20redo%202.pdo
spread gun
http://www.mediafire.com/view/3x8ljr...read%20gun.obj
covenant carbine
http://www.mediafire.com/view/xp8s1f...nt%20rifle.obj
noob tube
http://www.mediafire.com/view/dvt113...HER%20%206.obj
covenant plasma pistol
http://www.mediafire.com/view/1vwur7...a%20pistol.obj

didact
helmet http://www.mediafire.com/?jvimfkrbb8og561
unfolded by spartansonny http://www.4shared.com/file/lJ2HQcJY/didact_helmet.html
chest, neck http://www.mediafire.com/?5r036vmme7y57x8
forearm http://www.mediafire.com/view/4hdg50...m_gauntlet.obj
h4 armor
ability packs covy, fore, unsc https://www.mediafire.com/?3g2lr2e232oa2u6
scout chest http://www.4shared.com/file/sVljt0Ch..._Crimmson.html unfolded by death angel
scout chest http://www.mediafire.com/?eto866uadw0pjic unfolded
scout shin http://www.mediafire.com/?7le44avoqa2qd53 unfolded by death angel
scout shin foam https://docs.google.com/file/d/0B46i...?usp=drive_web unfolded by death angel
scout thigh http://www.mediafire.com/download/3a...high_plate.pdo (outer plated)
scout butt plate http://www.mediafire.com/download/kf...butt_plate.pdo (outer plated)
scout arm http://www.mediafire.com/view/ebzk4m..._scout_arm.obj (outer plated)
scout boot http://www.mediafire.com/?dag7ct3m5dktad1unfolded
foam by death angel https://docs.google.com/file/d/0B46i...?usp=drive_web
recruit chest http://www.mediafire.com/?go4b53g1wxva7ne
recruit boot http://www.mediafire.com/download/l0...cruit_boot.pdo unfolded
recruit shin and knee http://www.mediafire.com/?lxf5kujpffcvm2x unfolded
recruit thigh http://www.mediafire.com/download/vi...high_plate.pdo unfolded
recruit shoulder http://www.mediafire.com/?r5blglx1cy7k87c unfolded
unfolded by death angel https://docs.google.com/file/d/0B46i...?usp=drive_web

defiance game weapons
rfile http://www.mediafire.com/view/jiu639...ance_final.obj
pistol http://www.mediafire.com/download/ap...nce_pistol.pdo cleaned up only mesh welded

destiny
pistol duke http://www.mediafire.com/view/jxfh65...stiny_duke.obj
red death rifle http://www.mediafire.com/download/wp...eath_final.pdo


copyright bungie , 343 , Microsoft
most of these aren't unfolded. if they read unfolded they were unfolded by me.
 
Last edited by a moderator:
found this a while back dont know who drew this concept, but i started to model it. dont know when it will be done but i just wanted to tease you guys. it still needs a lot of work and i have never modeled a helmet sooo yeah..... enjoy none the less.

halo4odstconcept.jpg
 
I have to say, great work! I haven't seen much replies to this, probably because it isn't spartan armor, and that it would be really hard to create this in real life, but I may have a few thoughts on that.

Make the whole boy in pep, make a mold of it, then cast it in latex rubber, much like the ones they make the batman cowls out of. It wouldn't be the best as far as mobility goes, but it may be the way to make this suit more game accurate, just my two cents there.

looking forward to seeing more!

-Seth
 
I have to say, great work! I haven't seen much replies to this, probably because it isn't spartan armor, and that it would be really hard to create this in real life, but I may have a few thoughts on that.

Make the whole boy in pep, make a mold of it, then cast it in latex rubber, much like the ones they make the batman cowls out of. It wouldn't be the best as far as mobility goes, but it may be the way to make this suit more game accurate, just my two cents there.

looking forward to seeing more!

-Seth

Thank you Seth. I just want to model something that is not to popular, for lack of a better way to explain it. I had looked for files for prometheans a while back could not find any. Now that I am learning how to model in blender I figured I should start with the promethean armor since not to many files exist. I hope to eventually work my way up to halo 4 promethean armor as well.

On the chest piece I think I am going to scrap it as I feel the back is to far up high. As I thought about how to model it I decided to just model the whole armor at once and then split it. Stay tuned.
 
YES! I have always wanted someone to make one of these !

That is a Forerunner level 12 Combat Skin btw :)

I honestly don't know why I named it promethean. Ha. I will resume working on these when I get done with my shift. It lasts a week and then I am off for three days. I hope you guys like the one weapons. Let me know if you find any thing wrong with these or if you would like some changes.
 
quick update:

forerunnerlevel12.jpg


making slow progress. i got a little monkey next to me asking me a million questions and pulling me away from the comp. how do i make the pictures smaller when i upoad them. and does any one know how to scale a model in blender i am having problems remembering or if i even read it to begin with.

forerunnerlevel122.jpg

kinda of reminds me of a chicken.......a robot chicken eh, maybe i need to go raid the fridge. hmmmmm chicken.
i really enjoy modeling especially while listening to avicii, deadmaus, armin, kill the noise, knife party yeah.... they really help get the creative juices flowing.
 
I wish I knew modeling SO badly, there's a million and one things I would model (and more, since I'm always coming up with things :p ) The ODST concept helmet is looking great (and there's some people waiting on that one in the H4 Helmet Request thread, so you may need to tell them if you work anymore on it) and the the forerunner is looking great as well :) Keep it up (and keep making me envious of your skills :p )

-Seth
 
I wish I knew modeling SO badly, there's a million and one things I would model (and more, since I'm always coming up with things :p ) The ODST concept helmet is looking great (and there's some people waiting on that one in the H4 Helmet Request thread, so you may need to tell them if you work anymore on it) and the the forerunner is looking great as well :) Keep it up (and keep making me envious of your skills :p )

-Seth

i am still learning a lot on blender. i dont have skills yet ,but i will keep at it unitll it becomes second nature. i actually enjoy modeling more than drawing. the odst helmet is going to be a while, i honestly believe it needs alot of work to get to the way i want it and not what my present skills are letting me model. learning modeling is not that hard. kingrahl helped me out on this, he said crimmson watch these videos http://www.youtube.com/playlist?list=PL2BA5BDF79FF50122 and these as well http://www.youtube.com/user/ward7299/videos?flow=grid&view=1 , now go and make something boy. and i was like sir, yes sir and i took off like a good little recuit. ha. either way Seth, if i can learn it with very little time on my hands, i work in the oil fields for a week, off three. then i split my time with the wifey, my two little monkeys , closing on a house, switching from night shift to day shift and vice versa every week. but i really want to learn modeling. so watch these videos and you will suprise yourself how fast you will pick it up. when i first watched these i said to myself i only need to learn enough to make pep models, but the bug took a deep bite and watching dystored incs models, digital cantinas etc, the more i wanted to learn all of it.
 
I'll try it when I can, thanks for the links, it's something I want to learn sometime, thanks, and keep up the good work, and though I can see it being fun, I doubt anything could replace drawing to me ;)

-Seth
 
taking a break from the forerunner, not for long just trying to figure out how to design the back. after multiple tries i decided to do something else for a bit. what do you think? Its King Crimmson... or atleast that what i call it. derp.

Kingcrimmson2.jpg


kingcrimmson.jpg


got rid of the dots on top of the crown, figured they are easier to make from scratch than from pep.
link:
http://www.mediafire.com/?cckg28w2iyjn5n4
 
I love it ;) What you may want to do it make the emblems very thin, so not only are the pep-able, but could be attached to someone's armor as a beveled detail, but that's just an idea. You could also beef them out a bit, then you could cover in plaster (or polyurethane) and pour in some fiberglass resin to get a semi clear material (I was thinking it would be a nice touch to the gears of war emblem ;)

Nice work! You're really making me want to get in to modelling now >(

-Seth
 
I love it ;) What you may want to do it make the emblems very thin, so not only are the pep-able, but could be attached to someone's armor as a beveled detail, but that's just an idea. You could also beef them out a bit, then you could cover in plaster (or polyurethane) and pour in some fiberglass resin to get a semi clear material (I was thinking it would be a nice touch to the gears of war emblem ;)

Nice work! You're really making me want to get in to modelling now >(



-Seth



The gears of war I am going to make it large enough to hang it on my garage wall, I was thinking of casting it in clear plastic or something similar and adding LEDs to light it up. Or somehow attach it to a parking aid inside the garage that lights it up when the wheels cross the sensors. I have been wanting to make that for a really long time, just got to get it unfolded. I really think you would enjoy modeling, especially with the right music playing and a large jug of over sweetened tea.
 
Teaser

free-halo-4-unsc-logo.jpg



unsc.jpg


started on this a couple of hours ago, but sadly i need sleeps. I will continue on this later on today, the forerunner will have to wait until i get back in home( using my sister in laws computer)
 
Got the Gears of War Emblem unfolded, it's set at 12 inches tall (and wide, it's a cog you know ;) ), I'm thinking that it would be even better to be scaled say, two or even three feet tall, but hey, I'm just getting it ready for that ;)

Let me know if the link works/or if you see any problems with the unfold.

https://www.4shared.com/file/oMdiVjrP/GoWEmblemCrimmsonArmorer.html

P.S. Yeah, I'm the Armorer, it's a WHOLE LOT FASTER to type than Seth_Knight_of_New_Wales :p
P.S.S. Thank you Crimmson for the video links, one in and I've already learned a LOT, hopefully I'll be able to keep learning and get to the point where I can create my own models :)

-Seth
 
Got the Gears of War Emblem unfolded, it's set at 12 inches tall (and wide, it's a cog you know ;) ), I'm thinking that it would be even better to be scaled say, two or even three feet tall, but hey, I'm just getting it ready for that ;)

Let me know if the link works/or if you see any problems with the unfold.

https://www.4shared.com/file/oMdiVjrP/GoWEmblemCrimmsonArmorer.html

P.S. Yeah, I'm the Armorer, it's a WHOLE LOT FASTER to type than Seth_Knight_of_New_Wales :p
P.S.S. Thank you Crimmson for the video links, one in and I've already learned a LOT, hopefully I'll be able to keep learning and get to the point where I can create my own models :)

-Seth

OOOOOHHHHHH yeah. thank you Armorer. Make sure you put your name in it aswell as i dont know how and thank you. I know you will learn it and i hope you as much fun with it as i do.
 
Status
Not open for further replies.
Back
Top