Zero's Spartan IV Build ((FINISHED))

Status
Not open for further replies.

Zero Prime

Well-Known Member
Hey guys Zero here and I am back with another attempt with making GEN2 armor. As some of you know my last attempt did not turn out very good. Now I am back trying to make a GEN2 set of armor. Right now my armor is going to be:

Helmet- Fotus
Chest- Recon
shoulders- ODST
Forearms-MK VI
Legs- MK V

So this will be a fun build I am planning on a Hard-suit (Rondo) with foam highlights and under armor utilizing a modified Morphsuit. I hope to have this finished in the next few weeks so I can move on to my other projects including a concept Flood armor.

The fallowing pictures are of my Helmet, this is the second Fotus I have made the first being the Flood one. I used Monkeyfuj's model with a custom unfold to try and make the pepping proses easier.
P1010096_zpsaa744872.jpg

P1010099_zps12d0ce75.jpg

P1010100_zpsf6bcbcc6.jpg

P1010097_zps5138289d.jpg

P1010101_zps52bc7b86.jpg

P1010098_zps256fcf72.jpg

P1010102_zpsa30b16eb.jpg

P1010116_zpsacbe0dad.jpg

P1010118_zpsa6db5b0f.jpg

P1010117_zps729820b5.jpg

P1010119_zpsac0416d6.jpg

P1010113_zpsd5587ae4.jpg

P1010114_zps0b34fcbb.jpg

P1010115_zpsed2b5bbe.jpg

P1010112_zpsd906debb.jpg
 

Attachments

  • P1010096_zpsaa744872.jpg
    P1010096_zpsaa744872.jpg
    69 KB · Views: 235
  • P1010099_zps12d0ce75.jpg
    P1010099_zps12d0ce75.jpg
    77.6 KB · Views: 198
  • P1010100_zpsf6bcbcc6.jpg
    P1010100_zpsf6bcbcc6.jpg
    76.8 KB · Views: 225
  • P1010097_zps5138289d.jpg
    P1010097_zps5138289d.jpg
    58.3 KB · Views: 169
  • P1010101_zps52bc7b86.jpg
    P1010101_zps52bc7b86.jpg
    72 KB · Views: 194
  • P1010113_zpsd5587ae4.jpg
    P1010113_zpsd5587ae4.jpg
    95.9 KB · Views: 268
  • P1010119_zpsac0416d6.jpg
    P1010119_zpsac0416d6.jpg
    87.2 KB · Views: 300
  • P1010117_zps729820b5.jpg
    P1010117_zps729820b5.jpg
    73 KB · Views: 225
  • P1010118_zpsa6db5b0f.jpg
    P1010118_zpsa6db5b0f.jpg
    82.7 KB · Views: 215
  • P1010116_zpsacbe0dad.jpg
    P1010116_zpsacbe0dad.jpg
    100.1 KB · Views: 192
  • P1010102_zpsa30b16eb.jpg
    P1010102_zpsa30b16eb.jpg
    74.1 KB · Views: 216
  • P1010098_zps256fcf72.jpg
    P1010098_zps256fcf72.jpg
    60.8 KB · Views: 271
  • P1010114_zps0b34fcbb.jpg
    P1010114_zps0b34fcbb.jpg
    89.7 KB · Views: 211
  • P1010115_zpsed2b5bbe.jpg
    P1010115_zpsed2b5bbe.jpg
    94.2 KB · Views: 226
  • P1010112_zpsd906debb.jpg
    P1010112_zpsd906debb.jpg
    84.8 KB · Views: 194
I cant make up my mind about the fotus helmet. some days I like it and some day I dislike it, either way you have some clean folds there. have you decided on a paint scheme yet.
 
You did a really good job! :D The pep is all nice and clean!


Pat-

Thanks, I am often OCD when it comes to the pep phase of my builds

I cant make up my mind about the fotus helmet. some days I like it and some day I dislike it, either way you have some clean folds there. have you decided on a paint scheme yet.

Yah I have a similar issue with Fotus but I tend to like it, as for color I am going with Blue as my primary and Grey/Steel as my secondary and a Frost visor.
------------

I am almost don with my left ODST shoulder but I fear it may be too small, only time will tell.

P1010120_zpse5adf075.jpg

P1010121_zpsf040b48b.jpg

P1010122_zpse30262a4.jpg
 

Attachments

  • P1010121_zpsf040b48b.jpg
    P1010121_zpsf040b48b.jpg
    106.9 KB · Views: 241
  • P1010122_zpse30262a4.jpg
    P1010122_zpse30262a4.jpg
    97.4 KB · Views: 204
  • P1010120_zpse5adf075.jpg
    P1010120_zpse5adf075.jpg
    66.7 KB · Views: 212
Alright, hello everyone I'm back with another update!
So when we last left off I was unsure about my bicep pieces; unfortunately I was correct with my fears and after resizing it (twice) I finally got it right! I just finished my left Bicep piece and I have now started on my right piece. Also I have begin work on the Mk VI forearms that I chose for this particular suit.
P1010123_zpse9606d3f.jpg

P1010125_zps8e48abb4.jpg

P1010124_zpsf67ae2f5.jpg

P1010129_zps15dd8f22.jpg

P1010128_zps4b38d82d.jpg

P1010127_zpsa0af27b5.jpg

P1010126_zps7a2e586f.jpg

P1010133_zps1d60e688.jpg

P1010134_zps5e2c39d5.jpg


I will try to update more often but school is back in session and work has finally decided to give me more hours so I will post when I can.
 

Attachments

  • P1010123_zpse9606d3f.jpg
    P1010123_zpse9606d3f.jpg
    51 KB · Views: 223
  • P1010133_zps1d60e688.jpg
    P1010133_zps1d60e688.jpg
    49.5 KB · Views: 212
  • P1010129_zps15dd8f22.jpg
    P1010129_zps15dd8f22.jpg
    55.9 KB · Views: 294
  • P1010134_zps5e2c39d5.jpg
    P1010134_zps5e2c39d5.jpg
    46.7 KB · Views: 212
  • P1010128_zps4b38d82d.jpg
    P1010128_zps4b38d82d.jpg
    52.7 KB · Views: 211
  • P1010127_zpsa0af27b5.jpg
    P1010127_zpsa0af27b5.jpg
    51.4 KB · Views: 209
  • P1010126_zps7a2e586f.jpg
    P1010126_zps7a2e586f.jpg
    45.3 KB · Views: 196
  • P1010124_zpsf67ae2f5.jpg
    P1010124_zpsf67ae2f5.jpg
    51 KB · Views: 239
  • P1010125_zps8e48abb4.jpg
    P1010125_zps8e48abb4.jpg
    52 KB · Views: 210
Alright time for an update!

So I finished my other shoulder and have not started on my forearms. Also I resin'd my helmet, witch I now have hanging to dry. Hopefully my updates will become more regular but some other projects I have in the works are keeping me busy.
P1010135_zpseaa79f22.jpg

P1010136_zpsbd81ea36.jpg

P1010137_zpsfbdc6b43.jpg

P1010139_zpscd77caa1.jpg

P1010138_zps5ff9cb60.jpg

P1010140_zps10ecaed5.jpg

P1010141_zpsfb20d6f7.jpg

P1010143_zps0066bece.jpg
 

Attachments

  • P1010141_zpsfb20d6f7.jpg
    P1010141_zpsfb20d6f7.jpg
    66.2 KB · Views: 211
  • P1010140_zps10ecaed5.jpg
    P1010140_zps10ecaed5.jpg
    72.6 KB · Views: 202
  • P1010135_zpseaa79f22.jpg
    P1010135_zpseaa79f22.jpg
    60.9 KB · Views: 204
  • P1010136_zpsbd81ea36.jpg
    P1010136_zpsbd81ea36.jpg
    70 KB · Views: 214
  • P1010143_zps0066bece.jpg
    P1010143_zps0066bece.jpg
    89.2 KB · Views: 185
  • P1010137_zpsfbdc6b43.jpg
    P1010137_zpsfbdc6b43.jpg
    71.9 KB · Views: 227
  • P1010139_zpscd77caa1.jpg
    P1010139_zpscd77caa1.jpg
    55.1 KB · Views: 234
  • P1010138_zps5ff9cb60.jpg
    P1010138_zps5ff9cb60.jpg
    58.2 KB · Views: 162
IMO, the ugliest helmet I've ever seen come out of Halo. However, you're doing a fantastic job building it so far. Keep it up!
 
I´am not a fan of the fotus helmet myself but like Carpathia said you are doing a really good job so far!


Pat-
 
IMO, the ugliest helmet I've ever seen come out of Halo. However, you're doing a fantastic job building it so far. Keep it up!

Thanks, I am okay with Fotus, but I would like to see Hyabusa return

I´am not a fan of the fotus helmet myself but like Carpathia said you are doing a really good job so far!


Pat-

Thanks!

That pep work is amazing, wish I could be like you with that

Thanks man, keep up the amazing work you are doing and you will be!
------------------
------------------

Well I resined my bicep pieces and have also begun work on my Mk VI forearms which I am getting pretty far on with construction. Also I printed my Recon chest that I hope is big enough.

PICTURES!!!
P1010144_zpsa156ffc4.jpg

P1010146_zps77035f7e.jpg

P1010147_zps4673fcb6.jpg

P1010145_zps0e72af63.jpg
 

Attachments

  • P1010144_zpsa156ffc4.jpg
    P1010144_zpsa156ffc4.jpg
    139.6 KB · Views: 210
  • P1010147_zps4673fcb6.jpg
    P1010147_zps4673fcb6.jpg
    60.8 KB · Views: 185
  • P1010145_zps0e72af63.jpg
    P1010145_zps0e72af63.jpg
    65.9 KB · Views: 199
  • P1010146_zps77035f7e.jpg
    P1010146_zps77035f7e.jpg
    71.2 KB · Views: 187
Well I finished my right gauntlet and I am now hard at work on my Left one and Chest piece, I hope to have them both finished by the end of the week.

Pictures!
P1010148_zpsd10743a8.jpg

P1010146_zps1fdd26e8.jpg

P1010149_zps32669d63.jpg

P1010151_zps5e56f83f.jpg

P1010150_zps51a57790.jpg

P1010153_zps4982e1b4.jpg

P1010152_zpsf460c5bc.jpg
 

Attachments

  • P1010149_zps32669d63.jpg
    P1010149_zps32669d63.jpg
    41.8 KB · Views: 192
  • P1010146_zps1fdd26e8.jpg
    P1010146_zps1fdd26e8.jpg
    71.2 KB · Views: 145
  • P1010148_zpsd10743a8.jpg
    P1010148_zpsd10743a8.jpg
    51.2 KB · Views: 177
  • P1010151_zps5e56f83f.jpg
    P1010151_zps5e56f83f.jpg
    50.5 KB · Views: 173
  • P1010150_zps51a57790.jpg
    P1010150_zps51a57790.jpg
    58.1 KB · Views: 196
  • P1010152_zpsf460c5bc.jpg
    P1010152_zpsf460c5bc.jpg
    58.2 KB · Views: 203
  • P1010153_zps4982e1b4.jpg
    P1010153_zps4982e1b4.jpg
    50 KB · Views: 183
That's some clean work you've done there! Looks great - and so does the helmet :)

Thanks

-----------------------------------------------------------------------------------------------------------------------------------------------

So after being sick for quite some time I am back and almost back to %100. In the time I was down I finished my MK VI forearms and shifted focus on my chest piece. I am hoping to resin and harden my upper body within the next 2 weeks but only time will tell.

P1010161_zpsfa2c735a.jpg

P1010163_zps17bb2dd6.jpg

P1010164_zps951c57ba.jpg

P1010162_zps0e81bc94.jpg
 

Attachments

  • P1010162_zps0e81bc94.jpg
    P1010162_zps0e81bc94.jpg
    61.3 KB · Views: 176
  • P1010164_zps951c57ba.jpg
    P1010164_zps951c57ba.jpg
    38.3 KB · Views: 173
  • P1010163_zps17bb2dd6.jpg
    P1010163_zps17bb2dd6.jpg
    62.7 KB · Views: 143
  • P1010161_zpsfa2c735a.jpg
    P1010161_zpsfa2c735a.jpg
    71.1 KB · Views: 217
!!!UPDATE!!!

Hey guys I'm back and with another update! Unfortunately my chest piece had some... slight miss calculations so I have now had to redo the sizing on it and re-printed it. In the mean time I have finished the MK .V shins and I have now begun on my boots. I now have everything printed out and ready to go as soon as I finish the previous piece.

Pictures!

P1010177_zps8b28376b.jpg

P1010176_zps8b2d330b.jpg

P1010178_zpsc7839d87.jpg

P1010173_zps6c61fb30.jpg

P1010175_zpse5aeea4c.jpg

P1010174_zpscf751a7b.jpg

P1010179_zps2b50cfaf.jpg

P1010180_zpsabeb2e51.jpg

P1010181_zps37640397.jpg
 

Attachments

  • P1010177_zps8b28376b.jpg
    P1010177_zps8b28376b.jpg
    51.6 KB · Views: 199
  • P1010176_zps8b2d330b.jpg
    P1010176_zps8b2d330b.jpg
    59 KB · Views: 193
  • P1010178_zpsc7839d87.jpg
    P1010178_zpsc7839d87.jpg
    67.5 KB · Views: 164
  • P1010175_zpse5aeea4c.jpg
    P1010175_zpse5aeea4c.jpg
    65.2 KB · Views: 170
  • P1010174_zpscf751a7b.jpg
    P1010174_zpscf751a7b.jpg
    50.8 KB · Views: 170
  • P1010179_zps2b50cfaf.jpg
    P1010179_zps2b50cfaf.jpg
    56.6 KB · Views: 132
  • P1010173_zps6c61fb30.jpg
    P1010173_zps6c61fb30.jpg
    70.3 KB · Views: 132
  • P1010180_zpsabeb2e51.jpg
    P1010180_zpsabeb2e51.jpg
    60.3 KB · Views: 159
  • P1010181_zps37640397.jpg
    P1010181_zps37640397.jpg
    59.1 KB · Views: 191
Great pep work man, these pieces are gonna be great when you're done!

-Ryan M-082

Thanks man, hopefully once they are all resined they will still look good.
----------------------------------------------------------------------------------

So I just finished my boots, and they are now waiting to be resined once I have all of the pieces peped and ready to go. In the mean time I have started on my belt and that is almost fully cut out.

On to the pictures!
P1010186_zps3516644e.jpg

P1010187_zps56b106a4.jpg

P1010185_zps6fc10e13.jpg

P1010183_zps46effa8f.jpg

P1010182_zpse2b5afc6.jpg

P1010184_zps9df5069d.jpg
 

Attachments

  • P1010183_zps46effa8f.jpg
    P1010183_zps46effa8f.jpg
    69.2 KB · Views: 178
  • P1010182_zpse2b5afc6.jpg
    P1010182_zpse2b5afc6.jpg
    77.2 KB · Views: 138
  • P1010186_zps3516644e.jpg
    P1010186_zps3516644e.jpg
    59.5 KB · Views: 184
  • P1010185_zps6fc10e13.jpg
    P1010185_zps6fc10e13.jpg
    78 KB · Views: 195
  • P1010184_zps9df5069d.jpg
    P1010184_zps9df5069d.jpg
    72.8 KB · Views: 199
  • P1010187_zps56b106a4.jpg
    P1010187_zps56b106a4.jpg
    72.3 KB · Views: 178
UPDATE!!!!

So I finished my belt but it will need some modifications in the hip area so once I harden it I will go trough and replace the upper hip piece with foam. in the mean time I am now working on my thighs and I will update again soon with pictures of those.

P1010192_zps0e74e2d2.jpg

P1010188_zps63c7014d.jpg

P1010191_zps9503c7b8.jpg

P1010189_zpsee3bc34b.jpg

P1010190_zpse1c5c397.jpg
 

Attachments

  • P1010191_zps9503c7b8.jpg
    P1010191_zps9503c7b8.jpg
    64 KB · Views: 181
  • P1010190_zpse1c5c397.jpg
    P1010190_zpse1c5c397.jpg
    60 KB · Views: 145
  • P1010189_zpsee3bc34b.jpg
    P1010189_zpsee3bc34b.jpg
    64.4 KB · Views: 142
  • P1010192_zps0e74e2d2.jpg
    P1010192_zps0e74e2d2.jpg
    56.1 KB · Views: 192
  • P1010188_zps63c7014d.jpg
    P1010188_zps63c7014d.jpg
    68.6 KB · Views: 150
So I just completed my thigh pieces and I have now started on my Recon chest... again witch is a whapping 35 pages, not much to talk about but I thought I would post about it seeing as I am so close to finishing peping my suit.

P1010195_zps5dc0cbf3.jpg

P1010193_zps98ce0820.jpg

P1010194_zps13995cc5.jpg

P1010196_zps71b77297.jpg
 

Attachments

  • P1010194_zps13995cc5.jpg
    P1010194_zps13995cc5.jpg
    48.7 KB · Views: 177
  • P1010193_zps98ce0820.jpg
    P1010193_zps98ce0820.jpg
    48.1 KB · Views: 202
  • P1010195_zps5dc0cbf3.jpg
    P1010195_zps5dc0cbf3.jpg
    58.1 KB · Views: 190
  • P1010196_zps71b77297.jpg
    P1010196_zps71b77297.jpg
    73.1 KB · Views: 172
So after a few failed attempts I finally gave up on Recon and moved over to doing the Ricochet Chest modeled by Crimmson and unfolded by me.
I have the front center finessed and so far it is working much better than Recon, also now that my Math class is over with I can now refocus more on my armor, once I finish this chest I will start to resin all of my armor.
Ricochet Chest Download
Screenshot2_zpsf9bbd421.png

P3280200_zps3db51f97.jpg

P3280201_zpsb46b5016.jpg

P3280199_zps021f4d62.jpg
 

Attachments

  • P3280199_zps021f4d62.jpg
    P3280199_zps021f4d62.jpg
    82.3 KB · Views: 195
  • P3280201_zpsb46b5016.jpg
    P3280201_zpsb46b5016.jpg
    78.9 KB · Views: 191
  • Screenshot2_zpsf9bbd421.png
    Screenshot2_zpsf9bbd421.png
    439.4 KB · Views: 190
  • P3280200_zps3db51f97.jpg
    P3280200_zps3db51f97.jpg
    78 KB · Views: 183
Status
Not open for further replies.
Back
Top