Materials and tools in Australia

Marves2142

Member
This thread is for the use of finding materials and tools in Australia that might help in making props and costumes, and so we begin...

Materials for pep, foam and casting

Finding the materials needed for your own costume or prop can be difficult when first starting out in Australia whether it be because the materials are rare or they are branded differently. This post is here to help sort out a few name differences and a few locations to acquire the materials for as cheap as I can possible find them, please if you have a cheaper place to purchase the materials please share them, any information to help your fellow builders is what drives this community.


Tools and equipment:
Starting off with the tools of the trade and making sure you have what's right to begin is crucial to a less stressful build, without further ado lets dive right in. Some of these may sound dumb to some but to be sure ill cover all topics. With all these ill have links in the appendix as examples and/or where you can buy all of the mentioned items.

Scalpel: These can be purchased from an hobby store, art store, Bunnings or office works. Most scalpel blades are the No. 1 type (xacto sizing) but they are all pretty much the same size. Remember get lots of spare blades they dull easy

Stanley knife: Bunnings or office works offer the cheapest and best products, when it comes to sizing and type it all comes down to personal preference.

Hot Glue gun: Reject shops, Bunnings, art stores, eBay or hobby shops are your friends in this scenario, again any will work it all comes down to preference.

Heat gun: Bunnings is the best and cheapest place to get these, I prefer the Ryobi brand because it's cheap, well built and has a great warranty though again preference.

Hot Knife: Bunnings have a great one that's a wood burning kit with a knife attachment for foam work this is great for adding detail to your piece easily

Rotary tool: A dremel will make your life a lot easier if it's either foam or hardened pep any brand would do though if you want a great piece of kit that will last you years then the actual brand of Dremel will never lead you astray. You can get one of these from Bunnings, or a tool store like trade tools or any really.
Mouse sander : these are great for speeding up the smoothing portion of your pep and can with a bit of a delicate touch and the right grit sand paper be used on foam. Again hardware store like Bunnings will have them. I would recommend a Ryobi for quality and warranty.

Files:Files are perfect for smoothing off really rough edges where sandpaper or a dremel just cant do the trick, there are a few different types of files, those being metal files, Wood rasps and mini files all have their uses but from my experience iv found the metal files and mini files are the best to use on that stubborn bit of bondo. The large metal files are perfect for cleaning large surfaces and getting nice even surfaces, while the mini files are ideal for adding detail and those tight corners. Remember when using files to always use pressure on the forward stroke and less on the pull back to minimize the chance of clogging, something else to remember keep your files clean with a steel brush and and to clean them only on the angle of the groves otherwise you risk dulling the teeth. If by some chance the file gets clogged then you may have to clean them using a blade such as a Stanley knife or a scalpel though another option would be to let the file sit in paint thinner to soften it up and hit it with a steel brush. Files you can pick up from any hardware, tool or auto store

Mouse sander : these are great for speeding up the smoothing portion of your pep and can with a bit of a delicate touch and the right grit sand paper be used on foam. Again hardware store like Bunnings will have them. I would recommend a Ryobi for quality and warranty.

Cutting mats:
These can be a little pricey BUT worth it to have one so you don't ruin the surface you are working on but remember one thing DONT EVER use a hot knife on one . These can be picked up off eBay, at art stores, graphic supply stores or
Office works. I would recommend an A2 for the shear cutting surface size but again preference and get what you need.

Ceramic tiles: I can see it now you are going , what the hell do I need these for. Well these are useful for the Hot Knife, they don't cut through ceramic and the they don't absorb the measly heat from the knife or heat gun so win win. These can be picked up at Bunnings for cheap or a dedicated tile place as long as they are smooth, big and designed for the kitchen or bathroom you are good to go.

Sand paper: This is a tricky one to cover as there is no real rule of thumb on what to use though the heavy grit like 60 grit the way to 1300 grit, 60 being rough for heavy sanding and 1300 for finishing of course. Any hardware or car shop will have sandpaper

Respirators: These are a MUST for sanding back builders bog and fiber glass and resin why? well these turn into a fine particle that can be very damaging and the fumes they give off are toxic, I would recommend a proper half face respirator not a disposable one as they offer better protection. These can be purchased from any safety shop or hardware store.

Safety glasses: Please use these, you don't want to lose an eye from chips of builders bog or fiber glass. again safety shops or hardware stores

Gloves: the Best kind of gloves are the rubber type which you will find in the paint section of Bunnings or mechanics gloves at a auto stores. Most of the chemicals you will use have a habit of eating through latex and some people can get a rash from the powder used in them so rubber is always a better option.

The rest are kind of obvious such as permanent markers for foam, pens for pep and a straight edge either a steel rule, square or something similar and lastly scissors get a good pair as that can actual have a dramatic affect on the quality of the cut on foam or the card stock.

- - - Updated - - -

Materials

Paper: Simplest start I guess, 200-250GSM paper or card stock as its commonly called on the 405th, simplest place to acquire said paper.. office works they have a very large selection, and remember this grade of paper is good for pep and foam templates.

Bondo: or as it's known here in Aus Builders Bog this is a polymer filler that comes with a tin of material and a small tube or satchel of hardener this is not to be mixed up with car body filler which is a different material entirely. This is a builders product so hardware store, Bunnings, master or miter 10 of course.

Fiber glass and fiber glass resin: fiber glass resin is a clear material that when a harder is introduced turns into a plastic composite there are 2 different types of fiberglass, there is woven and chopped strand sheets available again preference of what you would like to use, though I've always liked the woven sheets better then the strands. There are plenty of tutorials on the 405th of how to do this. This can be bought from car stores, marine stores, Hardware stores or the cheapest place is Barnes a special effects store. Please remember these materials are hazardous and toxic so safety is a must so remember gloved, respirator and safety glasses.

EVA foam mats: EVA foam is useful in 2 ways, it's good for padding out pepped costumes and you can make costumes and props from scratch from it, most EVA foam mats are 10mm thick and are generally used for flooring in gyms or garages. They come in packs of 4 from most large retailers but the cheapest place is of course Bunnings, many people say go to Clark rubber but the prices are absurd. There are a few online retails as well that have them quite cheap and ill post one in the appendix below.

Craft foam: this is useful for detailing the EVA foam or hiding seams and what not, they come in sizes of A4 and A3 at about 2mm thick. There are many types of craft foam, the type you are after are the harder type as they are easier to work with and aren't like a sponge and soft which is a pain to cut out easily. ill add a link of an example as well as a place to buy them.

Self-Adhesive Foam Sheets: These sheets of foam are great for adding little details where hot glue can deform the standard craft foam sheets where the a concentration of the heat and to much glue can form bumps on the other side of the foam. These can be picked up at most art stores such as riot art or clever patch online, other places would be ebay of course.

XPS Blue Board: This stuff is a Thermal insulation made from Extruded Polystyrene board that is great for making props, basically carving into it have a look at dafrontlinetrooper for tutorials on it he is a master at working with it.

Tape: a good masking tape can help when assembling foam pieces as well as great for masking of areas for painting. Though masking tape isn't the only tape that could be of use when painting onto pep work painters tape is a better option. Blue scotch tape is the best and so far I've found the bear masking tape is surprisingly good at holding things together temporarily. Hardware stores like Bunnings or Masters have the largest range of masking tapes and the place I recommend you go.

Plastidip: This is used to seal foam and can be purchased from Aussie auto or better yet Plastidip Australia.

Putty/Primer: there are many different types you can buy spray putty separately or with primer from many places such as Bunnings, Master and the putty primer from Super cheap Auto or Repco. this is great for getting all those scratches and small dents out of your pep work after the builders bog smoothing process.

Paints: This I'm not even really going to touch on though I will recommend Krylon paints which you can get from online retailers, but there are so many different paints out there that it all comes down to preference, though hardware store and auto stores have the best selection. There is Enamel and Acrylic paint take your pick. though always clear coat the paints afterwards with a matte finish coat, it will not only protect the paints but give it that real dull military look.

- - - Updated - - -

Appendix

Scalpel:

http://www.bunnings.com.au/search/products?q=scalpel

Stanley knife:

http://www.bunnings.com.au/search/products?q=Stanley knife

Hot Glue gun:

http://www.eckersleys.com.au/products/jasart-glue-gun

Heat gun:

http://www.bunnings.com.au/search/products?q=Heat gun

Hot Knife :

http://www.bunnings.com.au/weller-30w-wood-burning-and-hobby-kit_p5910150

Rotary tool:

http://www.bunnings.com.au/dremel-10-8v-li-ion-cordless-rotary-tool_p6280035

Files
http://www.bunnings.com.au/trojan-4-piece-file-set_p5760184
http://www.bunnings.com.au/trojan-10-piece-mini-file-set_p5760077
http://www.bunnings.com.au/josco-3-row-stainless-steel-long-wire-brush-blh3rss_p6110545
http://www.bunnings.com.au/josco-3-piece-hand-wire-brush-kit_p6114348

Mouse sander :

http://www.bunnings.com.au/ryobi-12v-li-ion-cordless-palm-orbital-sander-rps12011_p6210448

Cutting mats:

http://www.eckersleys.com.au/products/jasart-cutting-mat

Ceramic tiles
:
http://www.bunnings.com.au/our-range/paint-decorating/flooring/tiles

Sand paper:

http://www.bunnings.com.au/search/p...ls&redirectFrom=Any&facets=BrandName=Flexovit

Respirators:

http://www.bunnings.com.au/3m-tekk-protection-half-face-spray-painter-respirator-at0580838_p5820584

Safety glasses :

http://www.bunnings.com.au/search/products?q=safety glasses

Gloves:

http://www.kbs-coatings.com.au/product/kbs-black-nitrile/

Paper:

http://www.officeworks.com.au/shop/...-250gsm-125-sheets-sp108830?searchTerm=250gsm

Bondo/ Builders bog:

http://www.bunnings.com.au/search/products?q=builders bog

Fiber glass and fiber glass resin:

http://www.bunnings.com.au/search/products?q= fibreglass resin
Barnes
http://www.barnes.com.au/fibreglass-27
http://www.barnes.com.au/polyester/lse-laminating-resin-1281
http://www.barnes.com.au/polyester/mekp-k1-1285

EVA foam mats:

http://www.raysoutdoors.com.au/onli...id-Black-Eva-Floor-Mats.aspx?pid=321542#Cross

Craft foam:

http://www.edartsupplies.com.au/Foam-Sheets-Multicultural-Colours-A3-10pk.html
http://www.edartsupplies.com.au/Foam-Sheets-Assorted-Colours-20pk-A3.html

Self-Adhesive Foam Sheets
https://www.cleverpatch.com.au/products/details/adhesive-foam-sheets

XPS Blue Board:

http://www.foamsales.com.au/shop/categories/41

Tape:

http://www.bunnings.com.au/search/products?q=masking tape&facets=BrandName=Bear|3M™ Scotch™|3M™


Plastidip:

https://www.plastidip.net.au/

Putty/Primer:

Primer
http://www.bunnings.com.au/search/products?q=spray primer
Putty
http://www.supercheapauto.com.au/online-store/products/SCA-Putty-Spray-400g.aspx?pid=288524#Cross

Paints:
have a look in a hardware or automotive store paint section
 
I love this!
Now I know where I can get craft foam!
My best friend's parents own the Clark Rubber here so I might be able to get cheap stuff :p

Does anybody know where to find a foam material with adhesive backing? I saw somebody use a similar product in a youtube video for building bondo details and it's just thrown out after
 
Ive read on a few threads that you should use automotive body filler, not builders bog. Also isn't the Bondo normally used an automotive body filler anyway?
 
Automotive body filler without the right clear coat over the paint will crack very easily from the heat, builders bog can expand and shrink a little with the heat meaning less chance of cracking and bondo is builders bog, body filler can also be called that but it uses a different base polymer
 
That's actually the issue Ive heard about builders bog, the whole cracking and brittleness. I guess it would vary from brand to brand.
 
While having bought EVA foam from Clark rubber and Bunnings, I have been looking for a foam that is flat on both sides for use in Helmet fins ect.
Clark rubber has sheets 1mtr x 2mtrs x 10mm for $145 which seemed pretty expensive. After searching around online I found a place in WA that carries the same/similar for $50 + $30 shipping to Melbourne. I have ordered one and will let you know how this turns out.
Where does everyone else get their eva foam thats flat on both sides from??
 
While having bought EVA foam from Clark rubber and Bunnings, I have been looking for a foam that is flat on both sides for use in Helmet fins ect.
Clark rubber has sheets 1mtr x 2mtrs x 10mm for $145 which seemed pretty expensive. After searching around online I found a place in WA that carries the same/similar for $50 + $30 shipping to Melbourne. I have ordered one and will let you know how this turns out.
Where does everyone else get their eva foam thats flat on both sides from??

The Hero Studio. All your foam needs and more
 
Where does everyone else get their eva foam thats flat on both sides from??
In addition to The Hero Studio in Brisbane ($10 flat rate shipping, they also do occasional 2 for 1 deals) there is Lumin's Workshop in Victoria (also $10 shipping, or free for purchases over $100) :) they both have a variety of thicknesses too and you can get that new foam clay stuff.
 
Bench & scroll saws are going on a bargain at Bunnings for $150 right now nationwide for any fellow Aussies here.
If you have very steady hands, these are very wise long-term investment that will save you money. Don't have to go out & buy blades all the time that often get dull very quickly from EVA foam.
 
Anyone got good suggestions for a bondo-related product? Need to do some cleaning up of 3D prints. I've heard car bog could work, but not sure which stuff to get.
 
Bondo is pretty much just body filler AKA car bog AKA blade putty. You can get it from automotive stores like Super Cheap Auto.

Body filler is best left for things like pepakura. For 3D prints look for some spot putty, that Americans also call glazing putty (you'll see Punished Props using that). You can get small tubes from Super Cheap Auto.

Sometimes, especially for gaps/joins I want to be strong, I'll smush in some bicarb of soda and add superglue instead. The glue gets soaked in, it sets rock hard, so can also be a hassle to sand ;) I just buy the cheap Bunnings super glues for $1.75

For fine lines sand them down and then hit it with some filler primer or spray putty. I usually just get the SCA brand, but also Septone when it's on sale (you can get ones specific for plastic, but the differing colours lets me know what parts still need attention).

So in summary;
* Spot putty from automotive store like SCA
* Filler primer or spray putty also from automotive store
* Cheap superglue from Bunnings
* Lots of finger grit sandpaper from Bunnings as the filler primer clogs sand paper super quick
* Bicard from Woolies or Coles ;)

PS - I was your Punished Props Secret Santa child ;)
 
Bondo is pretty much just body filler AKA car bog AKA blade putty. You can get it from automotive stores like Super Cheap Auto.

Body filler is best left for things like pepakura. For 3D prints look for some spot putty, that Americans also call glazing putty (you'll see Punished Props using that). You can get small tubes from Super Cheap Auto.

Sometimes, especially for gaps/joins I want to be strong, I'll smush in some bicarb of soda and add superglue instead. The glue gets soaked in, it sets rock hard, so can also be a hassle to sand ;) I just buy the cheap Bunnings super glues for $1.75

For fine lines sand them down and then hit it with some filler primer or spray putty. I usually just get the SCA brand, but also Septone when it's on sale (you can get ones specific for plastic, but the differing colours lets me know what parts still need attention).

So in summary;
* Spot putty from automotive store like SCA
* Filler primer or spray putty also from automotive store
* Cheap superglue from Bunnings
* Lots of finger grit sandpaper from Bunnings as the filler primer clogs sand paper super quick
* Bicard from Woolies or Coles ;)

PS - I was your Punished Props Secret Santa child ;)

Ah, awesome, thanks man! Looks like I'll be making a trip to Supercheap soon. The print's got a decent warp in it so I'll need to figure out a way to fill all that when I add both halves together..

Oh and don't worry, I recognised your profile, almost cool cosplay (wink).
 
If it's a big warp you could probably use 2 part epoxy as it'll squish to fill the gaps and you can wipe off the excess and/or sand the seams. If you have some alignment holes to put rods in that makes it much easier and stronger (epoxy is tough but I suspect inflexible/brittle at the same time). This is how I fixed my Aliens Pulse Rifle when I snapped the grenade launcher in half.

To keep this thread on topic, here is where you can get epoxy;

* $2 Shops are the cheapest at $3 or $4. Followed by Big W.
* Bunnings has a variety. Woolies/Coles in a pinch for the most expensive brands. Can get one that has a premixing needle (single use needle) which is handy.

Note most "5 minute" epoxy refers to the "pot life" or working time - it actually takes about 30 minutes to set (and 16-24 hours to fully cure). So if you can't clamp it there's a 2 minute epoxy that sets in 5 minutes (full strength 1 hour). This epoxy you can get for $2 from Hot Bargain. It's called Legion T232 Expogy Glue 30g. Outer packaging slightly different but this is what the tubes look like.

Note it is really really stinky so consider PPE and ventilation.
09b8f43fb53560a20ec83c55b5ee94ba.jpg
 
Anyone got good suggestions for a bondo-related product? Need to do some cleaning up of 3D prints. I've heard car bog could work, but not sure which stuff to get.

If you scuff it up enough initially with sandpaper, a coating of any standard wood filler putty will do just as good and sand quickly after it dries. I have used different types but one I am eager to try is Polyfilla, saw my dad using a tube of it for some work at home and it was much more liquidy then any other. Builders Bog will also do the job but I like wood fillers for the speed it gives me to finish a piece for casting.

PS. Wood Fillers don't grab to most materials. I have used it on raw low resulotion 3D printed parts and on resin casts and it chips off. Its good in a pinch but some work has to be done to get it to stick properly. A coat of filler primer is probably best to start in hindsight
 
Last edited:
Thanks guys for the help! I'll be making a run down to Bunnings/Supercheap soon.
Do either of you have an airbrush + compressor you can recommend? I've been saving up for a while because currently the only one I have is my Dad's $99 one from Aldi and it just... doesn't work. Sputters like mayhem.
 
If you mean the Workzone airbrush, this is a common rebranded model and I have the Ozito one. The problem is that it has no air tank to store the air, and the compressor is constantly running. This generates heat which in turn causes water to condense in your hair hose, hence the sputtering water coming out of the airbrush. The water trap at the compressor end can't keep up and you need to empty that when you can. What you need is a water trap at the airbrush end. I have the one in the picture, but note this particular one probably won't fit on a syphon fed airbrush. It will fit on the gravity fed one. Even with an air tank a water trap is a recommended idea.

The other side of the equation could be to do with the paint not being thin enough, the airbrush not being clean enough, or the airbrush being 'cheap' and needing some help such as a polish of the needle.

I've since upgraded the airbrush portion to an Iwata, and I still have spraying issues ;)

But for the interests in keeping this thread on topic, this water trap is good for gravity fed airbrushes and you can get them from China via eBay or AliExpress for around $5, or via Aussie sellers or hobby stores if you want to pay the premium price and not have to wait up to 3 months for shipping.
41rcumacZPL._AC_SY400_.jpg
 
Last edited:
Well... Might try to revive this two year old thread with some more modern needs.

Anyone have recommendations for 3d Printer supplies?
I've been happy with PhaserFPV for filament, but they do seem to be low-quantity most of the time. 20 colors listed and 4 in stock at 4 spools each etc. Anyone have a different go-to supplier?
I'm in Brisbane just for context but shipping is shipping, right?
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top