Aus-Nz Member And Event List

Subscribe
  1. #301
    [quote name='Curly' date='28 October 2009 - 03:06 PM' timestamp='1256713612' post='355935']

    well I'm gonna start work on my ODST costume when i go back to singapore at the end of the year. If i do complete it, I might just decide to pack it up and haul it over to brisbane. No idea when I'd use it though lol.

    [/quote]



    Wear it to Brisnova (Supanova Brisbane) lol

  2. #302
    New Recruit
    Member Since
    Dec 2007
    Messages
    1,498
    Total Downloaded
    0
    [quote name='p0rtalman' date='28 October 2009 - 12:55 PM' timestamp='1256687704' post='355659']

    ... Because if Steve Blum is still going to be there, so will i ...

    [/quote]



    They just updated the site and he is attending, doesn't say which of the two but I'm guessing it's probably both

    http://armageddonexpo.com/nz/anime-m...toons/#skiptop



    Not a lot that looks all that interesting to me at either event so far but hopefully they add some more cool guests between now and then. Kane Hodder could be interesting though.

  3. #303
    Excellent

    Well provided i can put away some extra cash over Xmas, ill be going

  4. #304
    New Recruit
    Member Since
    Oct 2007
    Messages
    65
    Total Downloaded
    0
    1 more day to halo-ween guys

  5. #305
    New Recruit
    Member Since
    Oct 2007
    Messages
    65
    Total Downloaded
    0
    just wondering, does anyone here play paintball in QLD?

  6. #306
    New Recruit
    Member Since
    Jun 2009
    Messages
    14
    Total Downloaded
    0
    aww man, i havent been on this topic in ages! after reading the posts from where i've left off, im REALLY going to get a move on with my armour, especially now that im finished uni until march.



    Nice to see a few more Victorians since last time i was here

  7. #307
    New Recruit
    Member Since
    Sep 2009
    Messages
    53
    Total Downloaded
    0
    I just hit a snag in my armor, not a big one...well maybe it is, but at least I can now have some help I just got a new Job that now requires me to start on December 1st and will keep me occupied until the end of February with just the basic Training, and then on to god knows where so I may have no ability to make or use armor. But oh well, I'll at least be able to consult with the Fitter-Armaments and all the other guys in that area who can help me with it.



    -Kaster

  8. #308

    Member Since
    Nov 2007
    Messages
    738
    Total Downloaded
    0
    Yeh hopefully I'f I get my suit done (mk6), I'll be able to march with you guys. That would be sweet



    on another note MY PC DIED!!!!! so I don't have any more pepakura . Sigh just when I was unfolding stuff for people . I have a new project coming up for you guys and it going to be awesome

  9. #309
    New Recruit
    Member Since
    Oct 2009
    Messages
    17
    Total Downloaded
    0
    Sure has been a while since i last posted exams have got me on my toes at the moment, last one is next tueday i cant wait to get back to finishing my marine, didnt end up completing it for haloween, but all my undergarments with a set of blackhawk knee pads and a scoped ak-107 made me look kinda dangerous anywasy so i got my balistic glasses and volla, i was a tactical one man insertion unit... who is striving to be a marine. Hows everyones progress going, GiR weren't you going to do a halo 3 marine/odst, hows taht working out for ya

  10. #310
    New Recruit
    Member Since
    Jan 2009
    Messages
    49
    Total Downloaded
    0
    This is a very helpful index, but i also wanted to ask, i went to autobarns and super cheap auto (In victoria) and i also noticed that they sell polyster Fibreglass resin it had came with the resin and catalyst, i was pretty happy to fnd that the do sell it but when i read the desciption again, they said it was only 250ml (http://www.supercheapauto.com.au/onl...d=1638#details) Would that be enough, it seems like it's the only place near me that sells them. What should i do?

  11. #311
    New Recruit
    Member Since
    Dec 2007
    Messages
    1,498
    Total Downloaded
    0
    [quote name='Quinn' date='15 November 2009 - 02:34 PM' timestamp='1258248854' post='363287']

    This is a very helpful index, but i also wanted to ask, i went to autobarns and super cheap auto (In victoria) and i also noticed that they sell polyster Fibreglass resin it had came with the resin and catalyst, i was pretty happy to fnd that the do sell it but when i read the desciption again, they said it was only 250ml ( http://www.supercheapauto.com.au/onl...d=1638#details ) Would that be enough, it seems like it's the only place near me that sells them. What should i do?

    [/quote]



    I have used that stuff in the past, basically it's the same as what I use now but smaller quantities and packaged for Septone (and more expensive). I can't remember exactly how much I got out of it but you'd probably be able to do a helmet and some other parts with that, would really depend on how many layers you use.

    I'd probably pick one of the kits up if you can't find anything else and see how far you get.

  12. #312
    New Recruit
    Member Since
    Jan 2009
    Messages
    49
    Total Downloaded
    0
    [quote name='Belakor' date='15 November 2009 - 11:38 AM' timestamp='1258249136' post='363292']

    I have used that stuff in the past, basically it's the same as what I use now but smaller quantities and packaged for Septone (and more expensive). I can't remember exactly how much I got out of it but you'd probably be able to do a helmet and some other parts with that, would really depend on how many layers you use.

    I'd probably pick one of the kits up if you can't find anything else and see how far you get.

    [/quote]

    So proberbly just buy multiple sets? Seeing as your soaking a fibreglass mat in it will soak up alot.

  13. #313

    Member Since
    Nov 2007
    Messages
    738
    Total Downloaded
    0
    [quote name='Quinn' date='15 November 2009 - 01:03 PM' timestamp='1258254219' post='363321']

    So proberbly just buy multiple sets? Seeing as your soaking a fibreglass mat in it will soak up alot.

    [/quote]





    well there is actually 2 really good places for buying fiberglass sheets , either try super cheap auto like belakor mentioned or go to bunnings warehouse

    i do know that bunnings sells it by the square meter for $27 and it last a very long time depending on the use



    hope this helps

  14. #314

    Member Since
    Aug 2009
    Messages
    126
    Total Downloaded
    0
    I don't know where in Victoria you are, but FGI (Fibreglass International) http://www.fgi.com.au/?q=springvale-vic in Springvale will have cheap matting, cloth & resin. The mat I get from them is about $11 for 3sqm. Resin usually about $15 p/l. And always get waxed resin. Unwaxed will always retain a tacky feel.

  15. #315
    New Recruit
    Member Since
    Jan 2009
    Messages
    49
    Total Downloaded
    0
    Mkay, i went to supercheap auto today and found the amazing "Fibreglass Repair Kit" and to be honest, i really liked it, it was complete with catalyist, stirring stick Polyster resin, mixing cup, and a paintbrush. But when i was looking through the shelves i saw this: http://www.supercheapauto.com.au/onl...d=3144#details . I asked them if it was the right one which meant that it contained the catalyst and had the pastey texture. He replied he didn't know. Is this the right one?

  16. #316
    New Recruit
    Member Since
    Dec 2007
    Messages
    1,498
    Total Downloaded
    0
    [quote name='Quinn' date='18 November 2009 - 08:20 PM' timestamp='1258528811' post='364552']

    Mkay, i went to supercheap auto today and found the amazing "Fibreglass Repair Kit" and to be honest, i really liked it, it was complete with catalyist, stirring stick Polyster resin, mixing cup, and a paintbrush. But when i was looking through the shelves i saw this: http://www.supercheapauto.com.au/onl...d=3144#details . I asked them if it was the right one which meant that it contained the catalyst and had the pastey texture. He replied he didn't know. Is this the right one?

    [/quote]



    I'm pretty sure that stuff is like what they refer to as Bondo Hair in the States. It's basically a body filler with glass fibers mixed in for strength. For armour building I don't think it's a lot of help, it is strong but the fibers make it pretty messy.

    The repair kit should be good for what you need, they're always handy since they've got everything inside

  17. #317

    Member Since
    Nov 2007
    Messages
    738
    Total Downloaded
    0
    yeh make sure you get the kits it'll save you maybe $15 to $20

    i get the fiberglass kit 3 at bunnings for $57 complet with :

    1sqm fiberglass mat

    1kg resin

    1 - 2 20 ml catalyst

    disposible brush

    instruction sheet measuring cup





    i think thats it but also make sure you get acetone for cleaning the brushes

  18. #318
    New Recruit
    Member Since
    Dec 2009
    Messages
    5
    Total Downloaded
    0
    hi folks just introducing myself. Posting from sydney. Just started my own armor project. Aiming to debut at next sydney Supanova

  19. #319
    New Recruit
    Member Since
    Jan 2009
    Messages
    49
    Total Downloaded
    0
    Sorry, Forgot to post. Victoria, Melbourne for me.

    -Quinn

  20. #320
    Hi Guys, just letting let you know I'm back on deck for a little while. I'll be working on my MK VI Armour. P0rtalman we should catch up, Guys I'll be on MSN latter tonight if anyone want to chat.

  21. #321
    New Recruit
    Member Since
    Dec 2009
    Messages
    51
    Total Downloaded
    0
    Dragon 1 Hervey Bay, Queensland

  22. #322
    New Recruit
    Member Since
    Sep 2009
    Messages
    4
    Total Downloaded
    0
    well im back after settling in and finally able to afford net, sadly i missed geddon aucks, but am gearing up for geddon welly in april ^.^



    Oh lost my resined and part fibreglassed odst in a moving/tv falling on box it was stored in disaster



    anyway chur again... lol

  23. #323
    Seems us aus/NZ lot have been pretty quite lately.

    Its not a halo related matter but i just though i would mention that I'm competing in the World Cosplay Summit (WCS) this year, ill be in the first round at sydney animania in march (20th) with Will, an amazing cosplayer from sydney, our team name is "where there are wills there are ways".

    So if your into anime, come check out Animania and the WCS and cheer us on!!! its great fun and there are some absolutely amazing costumes, including our own

  24. #324
    juliet76's Avatar
    Member Since
    Mar 2009
    Messages
    376
    Total Downloaded
    0
    [quote name='p0rtalman' date='27 January 2010 - 12:46 AM' timestamp='1264517203' post='387689']

    Seems us aus/NZ lot have been pretty quite lately.

    [/quote]



    That doesn't mean we've stopped working on stuff totally though, good luck with the comp Portalman!



    I also have an unrelated note, but one that affects Aussie gamers, so I thought I'd post it here-



    A discussion paper designed to stimulate debate about Australia getting an R18+ classification for video games has finally been released! It can be viewed at- http://www.ag.gov.au/gamesclassification -the public are invited to answer questions on the subject and also put forward any (brief) views they want heard. This is finally our chance to have our say on games like GTA4, Fallout 3 & Left 4 Dead 2 being censored before they reach our hands. Hurry, submissions MUST be in by February 28.

  25. #325
    New Recruit Zerebin's Avatar
    Member Since
    May 2007
    Messages
    89
    Total Downloaded
    0
    Yeah, we have all been a busy bunch it seems. But with the con season starting up properly in 3 months, time to show off what we have been making.

Similar Threads

  1. Spartan Service Number Forum Member List
    By WandererTJ in forum Creation Discussion
    Replies: 95
    Last Post: 18 Hours Ago, 5:45 PM
  2. Hi From Canberra AUS soon to be Brisbane AUS
    By Sabre66 in forum New Recruits
    Replies: 1
    Last Post: Jan 25, 2012, 5:19 PM
  3. 405th Member's List
    By marioknight92 in forum Conventions and Prop Parties
    Replies: 5
    Last Post: Jun 11, 2008, 1:15 PM
  4. A concern on the member list
    By Roodkill in forum Off-Topic Talk
    Replies: 34
    Last Post: May 6, 2008, 7:54 PM