So i just went to use my usual Pepakura priner to print a spike grenade. When it prints it only prints the edge id numbers, no lines at all. What could be the problem?
Make sure line transparency is off, otherwise check line width, it may be too small to even print. Heck, your printer may be out of ink and be printing what it can.
yea after i installed the cartridge (black only, no color) it printed my test page fine. So does anyone know how to change the line transparency or line width, because i cant figure it out for the life of me.
yep works great now, just printed a spike grenade and the simplified MA5C, the detailed model was just taking me TOO long.
BTW i scrapped my armor from last year nd im restarting with the HD models, all H3 i also plan to do EVERY weapon including support and equipment, as well as 2 of each dual weildable weapons.
I just had this issue too printing for my first time. Resolved this by turning transparency to 0%, selecting 'Print lines clearly (Vector Print)' and then setting lineweight to 10. Nice strong lines now
I just had this issue too printing for my first time. Resolved this by turning transparency to 0%, selecting 'Print lines clearly (Vector Print)' and then setting lineweight to 10. Nice strong lines now
Eagle this was from 2008. Please be aware of how long ago this was and how irrelevant you are to the post. Not only that but it is against the rules and frowned apon.
Eagle this was from 2008. Please be aware of how long ago this was and how irrelevant you are to the post. Not only that but it is against the rules and frowned apon.
Sorry, was just trying to help out. I only added because I had a similar problem and simply turning the transparency down wasn't enough to get the lines to print. I thought I'd add to this so that anyone else having the same issues would have a better chance at resolving them but next time I'll just start a new thread instead of pulling up an old one. Hopefully that won't be frowned upon.
Eagle this was from 2008. Please be aware of how long ago this was and how irrelevant you are to the post. Not only that but it is against the rules and frowned apon.
I disagree - this is a viable fix for Pepakura issues that a lot of members aren't aware of. It's on-topic, and while it certainly could have been left alone, I don't see a problem with the post.
If you go to settings (at the top, not the icon) then go to Print Settings there is a Print Lines Clearly and Print Lines Smoothly. Switch it to whichever it isn't set to. This worked for me.
My problem is that its printed out the shape but not the numbers any help? (Btw this is my first time trying to make pepakura models, planning to make a mark 6 armour from halo 3)