Official pepakura scaling thread

Status
Not open for further replies.
Redsleighdown said:
Has anyone thought about not scaling and just making a full size MC for display hmm?
Click to expand...
actually yes Im only 5'10"
and I figured since that the armor was really big that if I get it done and I cant make it fit me, Ill make a manakin or something to display it to my friends til I can show it off on me.
 
Last edited by a moderator:
this doesnt make sense to me, if my helmet is too small at 30.324, and 31.whatever inches tall, how is scaling it down going to help? because when you lower the scale the height goes down.
 
helmet scaling i got, but for those of us who are not in the physical shape of MC, how would i proportion it properly so im not making 19 chest plates untill it fits properly. Im 6' and about 240lbs, waist is 38-40 (varies) Thanks!
 
TwistedCory said:
helmet scaling i got, but for those of us who are not in the physical shape of MC, how would i proportion it properly so im not making 19 chest plates untill it fits properly. Im 6' and about 240lbs, waist is 38-40 (varies) Thanks!
Click to expand...

If you got the helmet down... You can use the same scale as the helmet for the chest... The other pieces may need a bit of an adjustment though...
 
Last edited by a moderator:
Macattack64 said:
If you got the helmet down... You can use the same scale as the helmet for the chest... The other pieces may need a bit of an adjustment though...
Click to expand...
any idea on how to scale the other pieces?
 
Last edited by a moderator:
Use a smaller scale... Try 20 or a 22 for the helmet... Of course the bottom or opening will need to be trimmed as it it for most peoples helmets...
 
thank god im 5'11".. LOL. you can do the mesurments to scale the way stated here (its easier), i used to calculate down to the centemeter height i needed, and once i got a scale from that i would use it on the rest of my parts.
 
OK, did a little playing with Excel
I generated cm by multiplying the height by 2.5
the Base Scale Multiplier is multiplied by by the scale found in the [2DPatternWindow->Scale Up/Down Development By Specifying Value...]
If the value already in that box is 30.342, you can use the value in the last column
These are only starter values, some parts may need to be scaled differently to make them fit right. You might also want to go two sizes up, if you use your exact height, the armor will be your height (from base of boots to top of helmet and won't fit around you)

Don't apply these to weapons; in general, weapons have a set size. One exception, you want to make your child look like he really is the master chief you can try using the Base Scale Multiplier to do so, but you're going to have to get the weapons to full scale first (or find some pdos that have already been fixed)

Why did I stop at 12 inches (30cm)?
Hey, why not make a set for your 1ft GI Joe (or just make a desk display)
(some of those folds are going to be d@|V|3|) hard to make)

Height---cm-------Base Scale Multiplier-----If current scale is 30.342
78-------195-------0.906976744--------------27.51948837
77-------192.5-----0.895348837-------------27.16667442
76-------190-------0.88372093---------------26.81386047
75-------187.5-----0.872093023-------------26.46104651
74-------185-------0.860465116-------------26.10823256
73-------182.5-----0.848837209-------------25.7554186
72-------180-------0.837209302-------------25.40260465
71-------177.5-----0.825581395-------------25.0497907
70-------175-------0.813953488-------------24.69697674
69-------172.5-----0.802325581-------------24.34416279
68-------170-------0.790697674-------------23.99134884
67-------167.5-----0.779069767-------------23.63853488
66-------165-------0.76744186---------------23.28572093
65-------162.5-----0.755813953--------------22.93290698
64-------160-------0.744186047--------------22.58009302
63-------157.5-----0.73255814---------------22.22727907
62-------155-------0.720930233--------------21.87446512
61-------152.5-----0.709302326--------------21.52165116
60-------150-------0.697674419--------------21.16883721
59-------147.5-----0.686046512--------------20.81602326
58-------145-------0.674418605--------------20.4632093
57-------142.5-----0.662790698--------------20.11039535
56-------140-------0.651162791--------------19.7575814
55-------137.5-----0.639534884--------------19.40476744
54-------135-------0.627906977--------------19.05195349
53-------132.5-----0.61627907---------------18.69913953
52-------130-------0.604651163--------------18.34632558
51-------127.5-----0.593023256--------------17.99351163
50-------125-------0.581395349--------------17.64069767
49-------122.5-----0.569767442--------------17.28788372
48-------120-------0.558139535--------------16.93506977
47-------117.5-----0.546511628--------------16.58225581
46-------115-------0.534883721--------------16.22944186
45-------112.5-----0.523255814--------------15.87662791
44-------110-------0.511627907--------------15.52381395
43-------107.5-----0.5-------------------------15.171
42-------105-------0.488372093--------------14.81818605
41-------102.5-----0.476744186--------------14.46537209
40-------100-------0.465116279--------------14.11255814
39-------97.5------0.453488372--------------13.75974419
38-------95--------0.441860465--------------13.40693023
37-------92.5------0.430232558--------------13.05411628
36-------90--------0.418604651--------------12.70130233
35-------87.5------0.406976744--------------12.34848837
34-------85--------0.395348837--------------11.99567442
33-------82.5------0.38372093---------------11.64286047
32-------80--------0.372093023--------------11.29004651
31-------77.5------0.360465116--------------10.93723256
30-------75--------0.348837209--------------10.5844186
29-------72.5------0.337209302--------------10.23160465
28-------70--------0.325581395--------------9.878790698
27-------67.5------0.313953488--------------9.525976744
26-------65--------0.302325581--------------9.173162791
25-------62.5------0.290697674--------------8.820348837
24-------60--------0.279069767--------------8.467534884
23-------57.5------0.26744186---------------8.11472093
22-------55--------0.255813953--------------7.761906977
21-------52.5------0.244186047--------------7.409093023
20-------50--------0.23255814---------------7.05627907
19-------47.5------0.220930233--------------6.703465116
18-------45--------0.209302326--------------6.350651163
17-------42.5------0.197674419--------------5.997837209
16-------40--------0.186046512--------------5.645023256
15-------37.5------0.174418605--------------5.292209302
14-------35--------0.162790698--------------4.939395349
13-------32.5------0.151162791--------------4.586581395
12-------30--------0.139534884--------------4.233767442

Remember, these are starting points, test fit your armor before continuing with fibreglassing or using as a template for plastic or other materials
Hope this helps!
 
this makes me wonder how big mc is. God a this scale I feel very sorry for hunters. Mc has got to be like 9 feet tall. And with super human strength that would really hurt.
 
How about compiling a list with inputs from everyone here of what scales correspond to common body measurements (like the measurements illustrated in most clothing mail order catalogs). Maybe expand upons Cha*man's excel list... something like X scale fits Y chest measurement or A scale fits B head circumference. This could save a lot of trial and error armor printouts and maybe even a few trees.

I am using the pepakura paper armor to make halloween Master Chiefs for my three youngest boys, ages 4-10. I used the 23.638 scale calculated from 67" height (the height of my 14 yr old) to build my first helmet and it barely fits my 4 yr old's 19.5" head circumference, and that is assuming no room for padding.

Thanks

<END FIRST POST>
 
If I had some final numbers
I need these as a set
Height of person, scaling actually used for the different parts, regular clothing sizes.
 
maybe organize the data per piece of armor.

HELMET(Measure around the largest part of the head, with tape above brow)
scale----------measurement (inches)
30......................AA
.........................
.........................
.........................
.........................
20......................XX

CHEST(Measure just under arms and across shoulder blades holding tape firm and level)
scale----------measurement (inches)
30......................AA
.........................
.........................
.........................
.........................
20......................XX

WAIST; UPPER ARM; FOREARM; THIGH; CALF; SHOE

I just don't see that height is a valuable data point at this level, because our body parts are not in the same proportions as the MC. One might have arms like AR-NALD but thighs like a "girlie man". I would think UNSC Quartermasters would do the same when fitting Spartan IIs for their issued MJOLNIR armor.

Thanks for everyones hard work

PS maybe we can even make use of all the failed scale attempts by inputing their scales and estimated body measurements that would fit them. Example "My first helmet using scale XX didn't fit me but it did fit my little bro and his head is YY inches"
 
I was wondering if the scaling is going to effect size of fitting my head into the helmet cause its already to small (Taking it the helmet off is pretty hard for me even though I never scaled it, so I was hoping it doesn't effect it att all or Im gonna have a problem.
 
Most likely you haven't cut off the neck. (or are actually bigger than a spartan)

That would probably help you out a lot.

Ultimate FAQ sticky man.
 
I'll work on this some tomorrow (9-12), but I'm going to be busy so I may not get enough done to make a good post
 
Cha*man said:
OK, did a little playing with Excel
I generated cm by multiplying the height by 2.5
the Base Scale Multiplier is multiplied by by the scale found in the [2DPatternWindow->Scale Up/Down Development By Specifying Value...]
If the value already in that box is 30.342, you can use the value in the last column
These are only starter values, some parts may need to be scaled differently to make them fit right. You might also want to go two sizes up, if you use your exact height, the armor will be your height (from base of boots to top of helmet and won't fit around you)

Don't apply these to weapons; in general, weapons have a set size. One exception, you want to make your child look like he really is the master chief you can try using the Base Scale Multiplier to do so, but you're going to have to get the weapons to full scale first (or find some pdos that have already been fixed)

Why did I stop at 12 inches (30cm)?
Hey, why not make a set for your 1ft GI Joe (or just make a desk display)
(some of those folds are going to be d@|V|3|) hard to make)

Height---cm-------Base Scale Multiplier-----If current scale is 30.342
78-------195-------0.906976744--------------27.51948837
77-------192.5-----0.895348837-------------27.16667442
76-------190-------0.88372093---------------26.81386047
75-------187.5-----0.872093023-------------26.46104651
74-------185-------0.860465116-------------26.10823256
73-------182.5-----0.848837209-------------25.7554186
72-------180-------0.837209302-------------25.40260465
71-------177.5-----0.825581395-------------25.0497907
70-------175-------0.813953488-------------24.69697674
69-------172.5-----0.802325581-------------24.34416279
68-------170-------0.790697674-------------23.99134884
67-------167.5-----0.779069767-------------23.63853488
66-------165-------0.76744186---------------23.28572093
65-------162.5-----0.755813953--------------22.93290698
64-------160-------0.744186047--------------22.58009302
63-------157.5-----0.73255814---------------22.22727907
62-------155-------0.720930233--------------21.87446512
61-------152.5-----0.709302326--------------21.52165116
60-------150-------0.697674419--------------21.16883721
59-------147.5-----0.686046512--------------20.81602326
58-------145-------0.674418605--------------20.4632093
57-------142.5-----0.662790698--------------20.11039535
56-------140-------0.651162791--------------19.7575814
55-------137.5-----0.639534884--------------19.40476744
54-------135-------0.627906977--------------19.05195349
53-------132.5-----0.61627907---------------18.69913953
52-------130-------0.604651163--------------18.34632558
51-------127.5-----0.593023256--------------17.99351163
50-------125-------0.581395349--------------17.64069767
49-------122.5-----0.569767442--------------17.28788372
48-------120-------0.558139535--------------16.93506977
47-------117.5-----0.546511628--------------16.58225581
46-------115-------0.534883721--------------16.22944186
45-------112.5-----0.523255814--------------15.87662791
44-------110-------0.511627907--------------15.52381395
43-------107.5-----0.5-------------------------15.171
42-------105-------0.488372093--------------14.81818605
41-------102.5-----0.476744186--------------14.46537209
40-------100-------0.465116279--------------14.11255814
39-------97.5------0.453488372--------------13.75974419
38-------95--------0.441860465--------------13.40693023
37-------92.5------0.430232558--------------13.05411628
36-------90--------0.418604651--------------12.70130233
35-------87.5------0.406976744--------------12.34848837
34-------85--------0.395348837--------------11.99567442
33-------82.5------0.38372093---------------11.64286047
32-------80--------0.372093023--------------11.29004651
31-------77.5------0.360465116--------------10.93723256
30-------75--------0.348837209--------------10.5844186
29-------72.5------0.337209302--------------10.23160465
28-------70--------0.325581395--------------9.878790698
27-------67.5------0.313953488--------------9.525976744
26-------65--------0.302325581--------------9.173162791
25-------62.5------0.290697674--------------8.820348837
24-------60--------0.279069767--------------8.467534884
23-------57.5------0.26744186---------------8.11472093
22-------55--------0.255813953--------------7.761906977
21-------52.5------0.244186047--------------7.409093023
20-------50--------0.23255814---------------7.05627907
19-------47.5------0.220930233--------------6.703465116
18-------45--------0.209302326--------------6.350651163
17-------42.5------0.197674419--------------5.997837209
16-------40--------0.186046512--------------5.645023256
15-------37.5------0.174418605--------------5.292209302
14-------35--------0.162790698--------------4.939395349
13-------32.5------0.151162791--------------4.586581395
12-------30--------0.139534884--------------4.233767442

Remember, these are starting points, test fit your armor before continuing with fibreglassing or using as a template for plastic or other materials
Hope this helps!
Click to expand...


hey thanks for the measurement. i can finally make my suit, and i bet im the shortest here. 5'4. woootage.
 
Last edited by a moderator:
Hey, cool. I'm 5'4" as well.

Edit:

Hey, I can't save pepakura so will I have to scale and immediately print it without saving or what?
 
Status
Not open for further replies.

Similar threads

MoonRakoon
1st Build Help with 3d files for scaling.
Replies
2
Views
332
MoonRakoon
MoonRakoon
Polochoon
Scaling properly Gauntlet Masterchief
Replies
2
Views
237
Polochoon
Polochoon
ForwardUntoDusk
1st Build Looking for Official Paint Colors...
Replies
6
Views
727
Draxes
Draxes
CherriDragon
Build Thread - Dallas Cowboys Rakshasa
Replies
1
Views
188
Sean Anwalt
Sean Anwalt
2007mustang
Pepakura Blue and red lines in pepakura files.
Replies
1
Views
107
Cadet
Cadet

Similar threads

MoonRakoon
1st Build Help with 3d files for scaling.
Replies
2
Views
332
MoonRakoon
MoonRakoon
Polochoon
Scaling properly Gauntlet Masterchief
Replies
2
Views
237
Polochoon
Polochoon
ForwardUntoDusk
1st Build Looking for Official Paint Colors...
Replies
6
Views
727
Draxes
Draxes
CherriDragon
Build Thread - Dallas Cowboys Rakshasa
Replies
1
Views
188
Sean Anwalt
Sean Anwalt
2007mustang
Pepakura Blue and red lines in pepakura files.
Replies
1
Views
107
Cadet
Cadet
Back
Top