HUL helmet attachment tutorial

Status
Not open for further replies.

Warpath5150

Jr Member
Hey guys! After getting back to work with building armour, Ive gotten started with hy helm first. So being a 100% scratch builder, I found that making a HUL, or mostly any other attachment was easier done than said.

Supplies list: Small LED flsahlight---$1.30
DSC00832.jpg

Sheet Of FoamBoard---$1
Hot Glue---$1 (ammounts of sticks vary)
Hot Glue Gun--Already had


Prices may vary, but this stuff wont be that expensive.



Step 1: Cut out, then glue 3 rectangles the same size as the base of the flashlight. Leave the light and button open. Then once your done that, glue that to a rectangular piece, scaled to a flat angle on your helmet, and glue it together.

It should be something like this:
DSC00835.jpg
Or for more technical things, use a thicker FoamBoard,
DSC00836.jpg

The same results apply to each 1 sheet of FoamBoard regular=3sheets of Foam Board THick



Step 2: Cover up any open faces of the actual Foam using anything you like.


Step 3: Attach whatever you want as estetics, and enjoy!



After Step 1, It really depends on what you want to build. Here's some pics of what I made:

DSC00838.jpg
The Back
DSC00839.jpg
THe Front
DSC00837.jpg
The Side


Note: You can attach each pece using velcro on the flat side of your FoamBoard, or use magnets

Enoy guys, I hope this helps.
 
Status
Not open for further replies.
Back
Top