Soft Parts Resource Thread - Gloves, Boots, Compression Shirts & Pants, and More

Status
Not open for further replies.

WandererTJ

Well-Known Member
I thought it would be a good idea to build a thread for all the various things we tend to buy for our costumes rather than building them ourselves... although, for those that DO choose to make custom pieces, this is a great spot to list them as well!

Please comment below with what you've used in the past for any of the following items, and if there is something (including categories) that has been left out, it will gladly be added!
I can also remove things as needed.

Please also mention what game your build is based upon, as certain items might be better suited for different variants of armor!


Neck Covers & Cowls:
Custom Made:
BlueRealmStudios
• LilTyrant's Kat Build
BluSpartan's Neck Seal and Undersuit Progression
• You could also do a fabric Stormtrooper neck seal with vertical ribs rather than horizontal ones. (Several tutorials out there)

Face Mask + Scarf/Neck Cover Options:
Mission EnduraCool Black Cooling Towel - $19.98
UA HeatGear® Tactical Hood - Link 2 - $23.88
FR Hot Weather Balaclava, Black, Universal - $33.78
Schampa WarmSkin SkullGaiter Facemask - $23.95
Schampa Stretch Billy Facemask - $14.95 - Not sure if this comes in black
Zan Headgear Microfleece Face Mask with Mesh Mouth - $13.95
Black - Heavyweight Flame and Heat Resistant Tactical SWAT Hood - $29.99
Black - Wintuck 1-Hole Face Mask - $6.99



Gloves:
Almost all gloves that you see here on the 405th, are either Paintball gloves or Tactical Gloves.
(These do not include or count as the Hand Plate Armor on the backside of your hands)

Custom Made:
Sean Bradley Custom ODST Gloves
• LilTyrant's Kat Build (Her "robotic" hand)
• Uratz-Studios - Halo 4 Hand glove sculpt

Rap4 Paintball Sup Grip Gloves:
• Very frequently used by members of the 405th
• Can be improved upon if the hard parts of the gloves are painted to match your armor
• Great for Halo 3 and Halo Reach builds
• $17.00 - $20.00
http://www.rap4.com/p/007071/sup-grip-armor-paintball-gloves-regular-black-large
http://www.amazon.com/Rap4-Paintbal...d=1378147009&sr=8-8&keywords=paintball+gloves

R-21 Tactical:
• Haven't seen these get used by anyone (yet), but they might be a nice alternative to the Rap4 Gloves
• $44.99
http://shop.ringersgloves.com/All-Gloves/R-21-Tactical

Mechanix Wear TAA M-Pact Glove - Impact Protection:
• Haven't seen these get used by anyone (yet), but they might be a nice alternative to the Rap4 Gloves
• $38.99
http://www.lapolicegear.com/mx-mp-f55-mpact-taa.html

Rothco Full Finger Rappelling Gloves:
• Haven't seen these get used by anyone (yet), but they might be a nice alternative to the Rap4 Gloves
• $28.99
http://www.lapolicegear.com/rothco-3451-rappelling.html?

Ringers Carbon Tactical:
• Haven't seen these get used by anyone (yet), but they might be a nice alternative to the Rap4 Gloves
• $59.99
http://shop.ringersgloves.com/All-Gloves/Carbon-Tactical

M-Pact (by Mechanix):
• Haven't seen these get used by anyone (yet), but I thought they would work well for a Halo 4 build
• Sleeker than the Rap4 Gloves, so should be better for Halo 4, you only have to worry about covering up/removing any lettering.
• Comes in different colors so that the might suit your Halo 4 build better
• $34.95
http://www.mechanix.com/m-pact

CG Full Leather (by Mechanix):
• Haven't seen these get used by anyone (yet), but I thought they would work well for a Halo 4 build... assuming you can find a way to dye the leather.
• $49.99
http://www.mechanix.com/cg-full-leather

Free Soldier: Sports & Outdoors:
• Thanks to C8lyn for pointing this brand out!
• Got some good options here, both full fingered and fingerless (for the ODSTs)
http://www.amazon.com/Free-Soldier-...=sporting-goods&ie=UTF8&qid=1430867489&sr=1-1
http://www.amazon.com/Free-Soldier-...sporting-goods&ie=UTF8&qid=1430867545&sr=1-53
http://www.amazon.com/Free-Soldier-...=sporting-goods&ie=UTF8&qid=1430867489&sr=1-4
http://www.amazon.com/Free-Soldier-...=sporting-goods&ie=UTF8&qid=1430867489&sr=1-8
http://www.amazon.com/Free-Soldier-...=sporting-goods&ie=UTF8&qid=1430867489&sr=1-9


Compression Shirts:
Whether or not you build a custom undersuit, you have to start somewhere, and that's usually with a Compression Shirt.
When looking at these, you want to avoid ones with logo placement or designs that would interrupt the look of your armor.
You also want to try to find ones that won't continually slide up as you wear them. You can always try velcroing them to your pants though!
• [Recommendations Needed]



Compression Pants & Armored Motorcycle Pants:
Here's a few miscellaneous Armored Motorcycle Pants, the lining on them may work better for use as your undersuit than standard compression pants:
http://www.amazon.com/Motorcycle-Motocross-Racing-Protective-X-Large/dp/B00QRJMMOA/
http://www.revzilla.com/motocross/troy-lee-bp-5705-hot-weather-armored-pants
http://www.revzilla.com/motocross/troy-lee-bp-7705-armored-pants
http://www.revzilla.com/motorcycle/klim-tactical-pants
https://www.511tactical.com/winter-leggings.html

Compression Pants/Shorts:
• [Recommendations Needed]


Boots/Shoes:
For this category, do you prefer using foam as the entire boot? ...or do you donate a pair of shoes to your build? ...or do you build your boot so the shoes are removable?

ANARCHIC Boots:
• Recommended by Gilmore for use as ODST Boots
• Already have a large profile and add a nice amount of height



Pads (Elbow, Knee, & Torso Motorcycle Armor):
6515R McDavid Hex Knee/Elbow Pads:
• Elbow Pads (Hex Patterned)
• Found out that this gem was used as the Elbow Pads for Marvel's Daredevil on Netflix
• Thought it would be great for those doing Halo 4 builds with Hex Patterns.
• $28.99
http://www.mcdavidusa.com/Product/6515R/MCDAVID_Hex™_Knee_Elbow_Pads.aspx

6500R MCDAVID Hex™ Shooter Arm Sleeve:
• Thought it would be great for those doing Halo 4 builds with Hex Patterns.
• $19.99
http://www.mcdavidusa.com/Product/6500R/MCDAVID_Hex™_Shooter_Arm_Sleeve.aspx

Motorcycle Body Armor (a few miscellaneous options):
• Motorcycle MX Full Body Armor Jacket Spine Chest Shoulder Protection Riding Gear: http://www.ebay.com/itm/Motorcycle-...Shoulder-Protection-Riding-Gear-/360527881792
http://www.amazon.com/Motorcycle-Protector-Street-Motocross-Jacket/dp/B004VIA0KM/
http://www.revzilla.com/motocross/troy-lee-bp-7850-hot-weather-armored-shirt
http://www.revzilla.com/motocross/troy-lee-designs-long-sleeve-armored-shirt
http://www.dx.com/p/yw001-motorcycle-body-protection-riding-armor-suit-black-grey-size-xl-183867
http://www.revzilla.com/motorcycle/leatt-adventure-body-protector
http://www.revzilla.com/motorcycle/fox-racing-titan-sport-jacket
• Paintball Gloves + Chest Armor Combo: http://www.totalpaintballgear.com/c...package-medium-shirt-gloves.html#.VMcsNEfF9UQ



Full Body:
Full Body Suits:
• Wetsuits
• Full Body Zentai Suit - these are very thin spandex suits, which may need padding & detailing added to them
• Undersuit Print by Snakepit Studios: http://www.snakepitstudios.com/#!halo/cxuk
BMP Props - Makes undersuits here on the 405th



Wrist Straps/Cuffs:
• [Recommendations Needed]




I hope to hear some input from everyone! :)
Be sure to also check out the Foam Supplies Guide I have listed in my signature!
 
Last edited by a moderator:
This is great! Thank you for putting this together and to everyone who contributes. Very useful for sure! :)
 
I'm gonna try to make my own halo 4 gloves from scratch however im not sure which material to use for the glove and the trigger finger armor also would like to know how to attach all the armor compnents to the glove without any detrimental effects like the glove ripping apart where the armor pieces are attached when i use the glove
 
Something I've noticed when I see most of the suits on here -- Too many people aren't covering their neck.
This is a cheap and easy way to fix that. Search on eBay. I bought one myself.
uploadfromtaptalk1440682926797.png
 
AGREED 100%! Easiest way to make a well done costume look cheap and incomplete. Super easy fix. I bought one, but didn't use it because my shirt zips up all the way turtleneck style.


Sent using Tapatalk
 
Found these gloves at the Homeless Depot. They're really comfortable, have a nice little hexagon pattern on various points, and they're only $15. Same gloves I used in my glove armor video.
 
Happy new year everyone !!!!!!

heres what i used for my Sgt Johnson base to go under the armour

Black under shirt to go down the arms really soft and nice ^_^

http://www.amazon.co.uk/Fruit-Loom-...447012291&sr=8-1&keywords=long+sleeve+t+shirt

Military hat comes in black to match the ones from the halo parody glad you came and the same colour in the games

http://www.amazon.co.uk/Beechfield-...=UTF8&qid=1449426590&sr=8-3&keywords=army+hat

Rule one of halo cosplay : Wear something comfortable under your suit its all good looking cool but if you aint comfy you aint at your best !
 
What does her left hand look like? Do you have some reference images handy? (heh)
 
Why is this not stickied? I think it would really up the overall quality of the builds on the site if people new quick and reasonable solutions like the ones you've shared. As well as the really accurate and expensive ones like that $450 undersuit?!?! :) Thanks Wanderer!
 
Status
Not open for further replies.
Back
Top