SBG's Halo 4 MC build.......

Crimmson · Nov 9, 2015

SavedbyGraceG12 said:
Thank you! Man to be honest, one of the kids just woke me up. Gonna have to set the alarm for 5a.m. for work. I usually take 40 to 50 minutes of my lunch at work to work on some of the pepping. Gonna sacrifice some sleep to get some stuff printed since I fell asleep on the couch. Which was my intentions to do that just that. The build must go on!

Now you are starting to sound like me. It is a slippery slope. You know it has gone to far when your wife starts tells you to stop and look up for a minute as she is making props for your daughters birthday celebration at 4 am with you while working on files to get them ready for pep.
You start a big ol' fight, your daughters(mine) wake up and take your wifies side. Now you got 3 chickies against you and they are giving you the dirty harry stare. Then you realize you were dreaming because you fell asleep at your comp and you wake up with the letter t key stuck to your face. Then you head over to the 405th for a quick fix.

adictedtoplay · Nov 11, 2015

That armor looks great! Just the motivation I needed to start on my first build. Will be waiting to see your finished product! :thumbsup

SavedbyGraceG12 · Dec 27, 2015

adictedtoplay said:
That armor looks great! Just the motivation I needed to start on my first build. Will be waiting to see your finished product! :thumbsup

Thanks! I know its been a while but, finally wrapping up on the torso! Thrusters are taking a little longer do to being totally enclosed on there back sides. So what of a pain. Might leave a few tabs unglued until I'm ready to resin them. Have to be gentle with them, to much pressure in certain spots causes them to get out of shape. By leaving a few tabs unglued that allows me to stick a ruler in the thruster to poke it back into shape. Once there completely done, I'll attach them to the rest of the torso for more photos. For now, here are the thrusters.

SavedbyGraceG12 · Dec 27, 2015

Dirtdives2424 · Dec 28, 2015

Crimmson said:
Now you are starting to sound like me. It is a slippery slope. You know it has gone to far when your wife starts tells you to stop and look up for a minute as she is making props for your daughters birthday celebration at 4 am with you while working on files to get them ready for pep.
You start a big ol' fight, your daughters(mine) wake up and take your wifies side. Now you got 3 chickies against you and they are giving you the dirty harry stare. Then you realize you were dreaming because you fell asleep at your comp and you wake up with the letter t key stuck to your face. Then you head over to the 405th for a quick fix.

Wow.....I thought I was the only one that that happens to..........but for me it's the "B, N, M and the space bar".

Charlie117 · Jan 2, 2016

how are you able to pep without fold lines and edge id omg. looks epic!

SavedbyGraceG12 · Jan 2, 2016

Charlie117 said:
how are you able to pep without fold lines and edge id omg. looks epic!

Actually edge ids aren't needed. If you have your computer in front of you. You can see where the parts go. When gluing pieces together just make sure the edges line up on the ends. Hopefully my bondo skills will be just as good, and thanks!

AcroAnomaly · Jan 5, 2016

I've been following along with my identical build and I would like to know how you connected the small pieces between the torso parts and added the side piece to the jetpack. Love following your work!

LoneLegionary · Jan 5, 2016

Good stuff! Wish I could make pep this good

Sent from my iPhone using Tapatalk

SavedbyGraceG12 · Jan 6, 2016

AcroAnomaly said:
I've been following along with my identical build and I would like to know how you connected the small pieces between the torso parts and added the side piece to the jetpack. Love following your work!

Sorry I didnt reply sooner. Watched a movie with d wife, and fell asleep. For the pieces on the thrusters, they're just glued on with hot glue with three little dabs here and there. And, for the pieces in between I free handed 2 extra faces on either side of each individual piece. In the second to last pic if you look closely I left one side of it open. So its not totally closed. Mainly the side you can't see when wearing the torso. Hope this makes sense?

- - - Updated - - -

And thanks for the comments guys!

AcroAnomaly · Jan 6, 2016

alright thanks... I had already free-handed the in between spaces but wasn't sure if there was another way and i will do that with the side pieces

SavedbyGraceG12 · Jan 6, 2016

AcroAnomaly said:
alright thanks... I had already free-handed the in between spaces but wasn't sure if there was another way and i will do that with the side pieces

Your welcome.

Chimzard · Jan 6, 2016

Amazing job you're doing!

SavedbyGraceG12 · Jan 7, 2016

Chimzard said:
Amazing job you're doing!

Thanks! Appreciate the comments!

rorywatts · Feb 7, 2016

I cut a hole in the back of my thrusters to get in so i can fibreglass them. Your pep work is great, do you use a craft knife to cut your pieces?

SavedbyGraceG12 · Feb 7, 2016

rorywatts said:
I cut a hole in the back of my thrusters to get in so i can fibreglass them. Your pep work is great, do you use a craft knife to cut your pieces?

Yes, and no. Almost finished with the opposite (RIGHT) shoulder/bicep. The first (LEFT) shoulder/bicep was done with x-acto knife along with the helmet, FRONT torso, and the 2 parts that sit over the shoulders. The rest was done with Silhouette Cameo. That includes the rest of the torso, and the (RIGHT) shoulder/bicep.

SavedbyGraceG12 · Feb 22, 2016

Not to big of a update, but it's definitely progress! Kinda slacked off a little since the middle of January. Managed to finish the other bicep/shoulder. Although, I did get permission to modify his forearm file. All I did was changed some of the geometry to make it more simple. Then I gave it back to Masterbuilder to clean up some of the topology, then back to me. Ended up translating the elbow piece off to the side of the forearm to help with the scaling in pepakura. Did that so it wouldn't interfere with the measure/distance tool in pepakura. Basically the file is more like a test fit file. My first one came out way to big after assemble. Will post a pic of that once I get the sizing right. Which I only have like 3 more pages to run through the Cameo, then folding, and gluing. And finally, assembling the 2nd forearm tester file.

Also, here is a pic of the tester file Unfold. Significantly reduced the amount of parts to put together for assembly.

PEPAKURA TURTLE · Feb 22, 2016

Thats some pretty nice pepwork, clean...

SavedbyGraceG12 · Feb 27, 2016

Tell me what you guys think? I think the second tester was a success. I also, took both files into a modeling program. After that I scaled them both until they were just about the same size. After rotating the veiw I noticed that from one particular angle the original hd model was a little more narrow getting towards the midway point down to the wrist area. Although the tester was derived from the oringinal hd model, the elimination of details being replaced by more simpler geometry, caused the tester file to look a little blocky, or wider in some areas. So what I'm hoping is with the original hd model, it will shrink some. The tester was unfolded horizontally with a lot less parts to assemble(39 parts). In the case of the hd model its about (105 parts), and unfolded vertically. So in my theory, once the hd model is pepped it will have a less blocky, more narrow look.

Minishdude1 · Mar 1, 2016

Lookin good thus far! keep up that amazing progress!

SBG's Halo 4 MC build.......

Well-Known Member

New Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Division Scheduler and Keeper of Con Lists

Member

Well-Known Member

New Member

Jr Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Attachments

Member

Well-Known Member

Attachments

Member

Similar threads

Similar threads