Recent content by Lazarus215

Hey everyone, super sorry about the lack of updates...just want yall to know that I do plan on finishing this beast, but its put on the backburner for now due to a pretty hectic life. between an upcoming wedding/cruise for a friend, school, and a possible move, I haven't had much time to work on...

You wont see a lick of pink when it's all finished... hopefully.

I'd estimate probably around 300-350 depending on what kind of paintjob you'd want. theres a pretty good bit of clean up associated with this dang thing.

I'm using a Folgertech (if you can call it that anymore...) Prusa i3 that's been modified a good bit by me (new RAMPS/Megaboard, larger Y carriage plate, new X carriage, dual hot end, Bowden extruders, etc) and I use Simplify3D for a slicing software. Filament is just 1.75mm PLA from Ohfila. it...

Kaween: The complete model will probably weigh in around 3kg or 6.6lbs. just judging from the half that I printed taking up about 7/8ths of a spool. I used 13% infil with 3 perimeters, and 3 shells (top/bottom) Mara: I know! isn't it cute? my one shin is totally pink while the other is half...

I'm unsure if I'm gonna be keeping the MA5D or try to sell it after its done. I'm really happy with my knife/M6H2/ARC-920 combo I've got going now, but if anything changes, I can always print another. I can always add magnet mounts in the AR too, so it'd be back-mountable. and thank you for the...

it's actually 12 pieces to one side, plus a barrel, flashlight, charging handle, and trigger (it's printed, just separate right now since I don't have the opposing piece printed to hold it in) The AR is still in assembly stage so I really haven't done anything besides very minor sanding on some...

I've also been bad ad started printing this amidst the chaos.

I've finished printing the bits, but the shins need a little bit of work and I may need to reprint them to be a little wider... They just don't seem to want to close nicely around my calves. I'm going to try doing some material removal with a cutoff wheel and maybe a hole saw. If that doesn't...

Re did the color on the Magnum. The silver I had on was too bright. This color seems to be closer to in-game

When she stops growing long enough for my to finish a set of armor before she outgrows it. :lol

Re: Noble halo5 3D printing armor for a cleint Oh I am drooling. if I end up making a suit for my wife, I am most definitely doing the body scan and using that for some Boolean cuts. would save SO much time in scaling and everything too!

In my experience, you really have 2 options... 1. Use the Make Solid command. - Import object - Open the EDIT tab on the left - Select MAKE SOLID - in the new option panel, select the SOLID TYPE (Default says FAST) Use Sharp Edge Preserve - Move Solid Accuracy and Mesh Density up or...

first shin is done, but needs a little bit of rough work, a section likes to dig into my shin... but my M6H2 Magnum is done! I said screw the Gold Standard paint job (too much tape.....) and went with a more classic look. 2nd shin is almost 1/4 done. hopefully I'll have it done by Monday and...

Do you use the Hollow command in meshmixer and delete the inside faces from that? I'll have to get with you to walk me through it over skype or something if possible. Anyways, as promised,here are pictures! Front view of shin. my calf sticks out just beyond the inside diameter. Pink Filament!!!!