Recent content by ODCA

  1. ODCA

    Props Foam Needler Commission WIP

    Here's the finished pics of the build! The needler has been sent to the guy who commissioned it!
  2. ODCA

    Halo Legends - MJOLNIR [GEN2] - Hermes

    foam unfold for kelly's helmet NOTE: the scale is for a child, so be sure to check the scale before building
  3. ODCA

    Model portfolio (Satchmo III)

    yes, this post is on April fool's day, but it's not actually a joke I unfolded kelly's legends helmet for foam it's a kid-size build... so you should check the helmet's scale before building
  4. ODCA

    Props Foam Needler Commission WIP

    It is done I need to sleep, but i also really need to show this And its so Bright! Dont let my sleep deproved face fool you I'm fanboying so hard inside I'll take better pics soon
  5. ODCA

    Props Foam Needler Commission WIP

    Thank you!! I'll smooth the texture a little bit, but i'm trying to keep them opaque enough for them to light up nicely If i ever make a second one, i'll laser cut a standard crystal shape and bevel the edges making all of them random out of a square block was painful XD
  6. ODCA

    Props Foam Needler Commission WIP

    I did a quick test before heading out Tonight i'll assemble the battery holder and switch, and glue the spikes in place
  7. ODCA

    Props Foam Needler Commission WIP

    4 sanding drums torn, 3 times a piece of acrylic sneaked it's way trough my safety glasses into my eye and 3 1/2 hours of sanding later The spikes are shaped I still need to sand them a bit by hand, just to make them smoother
  8. ODCA

    Props Foam Needler Commission WIP

    A couple of hours later and i'm halfway done I still need to sand and shape them some more
  9. ODCA

    Props Foam Needler Commission WIP

    Ok, big update on the build I did about 3-4 coats of plasti dip, then silver for the main body After that, i did a couple coats of a spraypaint color my client chose, a blue with a very subtle hint of purple Then, i put the meedler on hold for a little while, because i needed to get into...
  10. ODCA

    Props Foam Needler Commission WIP

    The one on my university’s prototype lab is a Camfive brand laser cutter I wish i actually owned one myself, but that’s too rich for my blood haha
  11. ODCA

    Props Foam Needler Commission WIP

    I did some sanding on the shells to eliminate any CA glue residue I also spent about an hour using my dremel to smooth out the main body of the needler And heat sealed everything
  12. ODCA

    Props Foam Needler Commission WIP

    Yesterday i sent everything to the laser cutter And stardet assembling everything The cutting took a bit less than an hour for everything I started to test out the lights as well My heat gun died, and while it’s being repaired, i heatformed the shells on the stove... which was a stupid...
  13. ODCA

    How far have you guys travelled ?

    For fun: New York For a convention with cosplay: Austin , for RTX Both of them technically in the same trip The idea was to go to Austin for RTX, and, since traveling is expensive, i looked for the cheapest option for plane tickets Here’s how the flight itinerary was Departure from Guadalajara...
  14. ODCA

    Member Name Changelog

    Hello FANGS could you please change my name to: ODCA thank you!
  15. ODCA

    Props Foam Needler Commission WIP

    quick update since I could not sleep, i did some more work on the blueprints
Top