3d print

  1. JustinIsTree

    1st Build JustinIsTree's Reach Build

    Hello everyone! I'm JustinIsTree and I guess here's my (technically second) step into the grand world of Halo cosplay. Years ago for Halloween when I was like 14 or 15, I wanted to be Master Chief so my dad took the leftover cardboard we had in the garage and made me a full suit from that in...
  2. blakecooper

    Looking for Pre-Sliced Marine Helmet

    I'm having a hell of a time trying to slice the Helmet file for the Halo 3 Marine Helmet. Does anyone have a version of it pre sliced? Looking to put it on my Ender 3 with a build plate of 220mm. Thank you!
  3. MonitorChakas

    Help with reinforcing a weak 3D print

    Hi there! I have a big 3D print of Guilty Spark in PLA material. Im trying to rescue this print that unfortunately was not printed using much material so it suffers from brittleness. Any advice on how to reinforce? My ideas are first filling all the holes that are accessible to me with...
  4. Pebelo

    Batman - The Arkham Knight - 3D Printed Build

    Hi everyone! I've been replaying Batman: Arkham Knight recently and I remembered that I wanted to make an Arkham Knight costume years ago when I played it for the first time. Since I have a 3D printer now I decided to finally start working on it. I'm a little too busy with college to model...
  5. Subnova

    My Armour Creation Journey (Helmet)

    Dear Fellow Spartans and ODST, I have a long way to go but I hope my experiences here help us all with our costume building. This thread I will try to keep regularly updated, however I may go quiet for periods due to work and my carers duties. I will start out with the specs of my equipment...
  6. DonutMk6

    (new to 3d printing) Can i print OBJ files?

    I thought i could only print stl files but a template i have has obj files ripped from the game, do i have to modify the files or can i just print them as is.
  7. Waltimusprime

    Foam Master chief infinite build

    Haven’t posted much over the years so I figured I’d do better and start being active on here to network with my fellow builders more. I got heroes workshop (stefano/stealth) templates and I’ve used a couple of moesizzlac files and the helmet was originally a sonner file but I sculpted over it...
  8. Sgt Whupass

    Rookie ODST Build

    Long time Lurker, first time Build-Thread-Poster. I started my ODST build and decided to go with Rookie because I've got limited imagination and even more limited time to work on this week to week. I build a H3 Master Chief back in 2009-2010 out of pepakura and after practically destroying my...
  9. Jetskigunner

    Jetskigunner's Mjolnir Mark VII

    For those of you who know me, I don't tend to post on the forum a lot, or really at all. But I figured I'd actually make a build thread for once. As the title suggests, I'm making a Mark VII from Infinite, thanks to 343's generous cosplay guide, I have all of the reference images I need. I'll...
  10. Pebelo

    My first build - mark VII armor

    Hi, I'm Pebelo and I'm currently beginning my halo cosplay journey. I've always been interested in cosplay but the mk7 cosplay guide 343i recently released got me really excited and made me want to make a suit of armor of my own. I'm not good at working with foam, etc. so I'm planning on 3d...
  11. Spartan Scythe

    Achilles Set

    Hello 405th, New member here lol. So, I’m looking for a full set of Achilles armor. I’ve been wanting to 3D print a solid Halo statue for myself, and since the Achilles set perfectly represents the whole idea of “SPARTAN,” I decided I’d want to do that. I would then use it to render my own...
  12. reclaimerx10

    Searching for iron man MK 3 files

    Hey all, looking for a complete set of Iron Man MK 3 3d print files for a full wearable suit. I havent found anything searching around. I have found a few bits and pieces and a full mk 6 but not the mk 3. Also if anyone can direct me to a full war machine suit as well for 3d printer, original...
  13. shadowbreakre

    Kingdom Hearts- Aqua's Stormfall Keyblade - 3D Printing

    3D printable Stormfall Keyblade. Aqua's Keyblade from Kingdome hearts. Meant to finish and Upload this days ago but with terrible weather in Austin and frequent power outages, I never got the chance. 2 more keyblades on the way soon! https://www.thingiverse.com/thing:4761067 Features a Charm...
  14. MeasuringWriter

    3D-Printed Halo 4 Multiplayer Build

    Hello there! Long time lurker, checking in and finally making a build thread. For a long time, I’ve wanted to build a Spartan-IV. Now that my foam Mk.V(B) is finally showing its age and with the recent acquisition of a 3D printer, I figured its time to upgrade. The goal of this build is to...
  15. Yinyangyoyo1

    First Build 3D print ODST Parts

    Hey all, this is officially my first thread and also my 3rd attempt at getting into building a costume. I tried pepakura and EVA foam but both times I lost my patience with the learning curve with the skills needed. Right now I am currently working on a full Reach armor set and will be going the...
  16. PA Cosplay

    Props Halo Reach Needle rifle (3d Printed)

    Now that I've gotten my Br-55 done, its time to move onto the next project. I've been printing this for a good week and a half so far but I still got quite a bit to print to go. The file is on thingerverse by OddWorks, I'm printing at 130% size to make it feel like something only an elite could...
  17. L

    Halo 3 EVA visor

    Hello everyone! this is my first post here as a member of the 405th, I've also just started my first halo cosplay, the meta from RVB. and I've hit a dead end in terms of visors, there is only 1 visor up on Etsy for sale but don't know if it will fit my helmet, I was hoping some of you might have...
  18. ConnorCreator

    Armor Battle damage Tutorial! (3D printed)

    Hey everyone! I'm going to star rolling out tutorials covering all things 3D prop related! this is my first video! It covers battle damaging! Let me know if you found this helpful and if you have any other questions of tutorials you'd like to see made.
  19. Marty Falco

    MJOLNIR Mark VI Recon (Halo 3)

    This build technically started way back at the end of May 2020 when I first received my 3D printer. In my furious rush to finish this suit before Halloween, I've spent the better part of a day immersed in every corner of the 405th and was inspired to post a thread on this build. At the same...
  20. brennan lyons

    Looking for 3D printer!!! IDK WHAT IM DOING!!

    Alright, i haven't been very active here but I know all of you are the best of the best out there to contact. I currently have a Dremel 3D20 and the prints are alright. Although my father and I are currently looking into a new printer, I have some ideas in mind but I wanted to know what...
  21. PrimeReclaimer

    1st Build Halo Reach 3D Printed Armor Build

    I’ve gotten a start on my Reach Armor with the helmet so far. I saw a ton of other threads and was inspired to share my journey as well. First part: raw recon Helmet print, to fully finished recon Helmet print.
  22. sfritts10

    Halo Infinite - Mark VI Gen III Build

    Hey guys! Long-time fan, mid-time lurker, short-time builder. Figured I'd go ahead and start a WIP thread on my Halo Infinite build, I'll be posting my resources + crediting modelers when needed and such on here. Can't wait to finally be one of you guys (with more than a Disguise Ultra Prestige...
  23. Spartan J114

    Spartan 114's Mjolnir MK V Armour

    How's it going everyone. I'm Spartan 114 and I've been a Halo cosplayer/prop maker for about 3 years now and I've been using the 405th website for most of my journey. I never posted anything because of my lack of quality camera, I have recently replaced my old phone with a new one and as such I...
  24. tvanhelene

    1st Build My custom 3D printed halo reach armor build journey (So Far)

    Hello Everyone! This is my first real post on this site so I will do my best to emulate the format everyone else uses. I've been making small props with 3D printed for about a year now. When I got sent home from my college campus and was told I wouldn't be going back until most likely next year...
  25. Hatake Cosplay

    Halo Reach Shotgun (3d print)

    Well my Creality CR-6 SE arrived over the weekend and I thought what better way to test a new printer than with a Halo prop. Its been a couple months since i finished my MK6 armor and I could use a main weapon to go along side the Halo 5 magnum. These are just 4 of13 pieces that when combined...
Top