armor

  1. shadowbreakre

    Halo Infinite: ISR Helmet - 3D Print Build

    https://www.thingiverse.com/thing:5182205 Kicking off the New Year with ISR Helmet from Halo Infinite! As a bonus it also includes a version with cat eats! So far this is my favorite helmet in infinite and I just had to include the Cate ears too!
  2. My ODST Scout posing with scenery

    My ODST Scout posing with scenery

    Found a little scene at Emerald City Comic Con
  3. HaloReach1827

    Best method of helmet and armor making (halo reach)

    Pepakura, 3D printing, Eva foam, which one gets the best details and looks?
  4. Echo2236

    Armor tips

    What is the best adhesive for eva foam ive used hot glue but I've always wondered if there where better options especially for armor
  5. shadowbreakre

    Kingdom Hearts- Terra's Linger Will Armor - 3D Printable

    After many, many setbacks, here it is Finally! 3D printable Terra's Lingering Will Armor from Kingdom Hearts! https://www.thingiverse.com/thing:4882089 Like the Aqua's armor I only did the rigid plating. other parts of the armor such as the sides and boots will still need to be made out of...
  6. kschlege

    1st Build Master Chief Gen 2 Armor

    I should start with a little backstory. For the past year I have started liking different types of armor, mainly sci-fi and powered armors. I've always known about Halo but haven't been interested in FPS games. I downloaded MCC a year ago and have played half of the Reach campaign, half of the...
  7. shadowbreakre

    Kingdom Hearts- Aqua's Armor - 3D Printable

    Here is the 3D printable Aqua Keyblade Armor from Kingdom Hearts. https://www.thingiverse.com/thing:4860141 The armor is pretty simple overall and would probably be better just making out of foam but since I was working on the helm I though I'd just do the rest. that said I only included the...
  8. Gabbylight

    Hi! Baack again lol PDO into a OBJ

    I'm in the same dilemma again, I was wondering if anyone can help me convert a PDO to OBJ since I'm still stuck with my Mac.. I'm currently trying to make a 1/6th and a 1/12th Spartan Fig. Think it like a Hot Toys! So i was wondering if anyone can convert these files! Here's the links, its all...
  9. SecretJedi0321

    Unfold Help Needed - Dark Trooper Helmet

    I have this Dark Trooper Helmet 3D model that needs to manually unfolded in Pepakura so it can be assembled with EVA foam. The Auto-Unfold creates some really weird shapes. I'm new to Pepakura and cosplay in general. Could I get some help? I've attached a photo below and can attach the model later.
  10. Jeffw773

    Huge 3D Model / Sound FX Archive from nearly every Halo Game (Halo CE - Halo 5)

    Hello all! This is my first time posting about this here in the forums, but I have been working on a MASSIVE passion project for the last two months, which has been to create a near complete archive of every important 3d model from each Halo game. This archive includes the 3D models and Sound...
  11. ODCA

    ODCA's foam unfolds (and unfold requests)

    Hello 405th! Recently I've been unfolding a lot of pepakura files for foam and learning a lot of neat tricks with the program And I wanted to give back to the community that has done so much for me So I'm making this thread to post the unfolds I make and I'll also be taking unfold requests for...
  12. Caleb Ellis

    Need help with attaching pieces!

    I made a custom suit of armor out of 16 guage steel sheets, but I am having some issues. The back and chestplate are separate pieces, that attach over the shoulders and under the arms. I bought some clasps from amazon, but they can't handle the stress. Any ideas on how to connect the pieces?
  13. PrimeReclaimer

    1st Build Halo Reach 3D Printed Armor Build

    I’ve gotten a start on my Reach Armor with the helmet so far. I saw a ton of other threads and was inspired to share my journey as well. First part: raw recon Helmet print, to fully finished recon Helmet print.
  14. ODSTWolf1013

    First Build/New to Cosplay: Into Hell

    Good morning 405th, This is long overdue as I have been working diligently on my build. I will make sure I do a more formal and informative introduction in the Introduction thread, but my name is Matt and I am posting up my very first build in cosplay ever. Humongous shout out to...
  15. Jerverant

    ODST Armor v6.0

    Hi everyone! I've been part of the 405th Mexican Regiment for a while, but I've never posted here D: so, with the Halo 3 ODST launch on pc a few days ago, and with the release of the Official Rookie Cosplay Guide, I wanted to remake some parts of my current ODST, to make it look much more...
  16. tvanhelene

    1st Build My custom 3D printed halo reach armor build journey (So Far)

    Hello Everyone! This is my first real post on this site so I will do my best to emulate the format everyone else uses. I've been making small props with 3D printed for about a year now. When I got sent home from my college campus and was told I wouldn't be going back until most likely next year...
  17. IMG_20200321_140028-01.jpeg

    IMG_20200321_140028-01.jpeg

  18. IMG_20200327_121711-01.jpeg

    IMG_20200327_121711-01.jpeg

  19. HALO Live Action * Skillet - Invincible * Kid 3D Printed Armor

    HALO Live Action * Skillet - Invincible * Kid 3D Printed Armor

    Just a mash up using one of the kids suits along with some bits a pieces from the Forward Unto Dawn movie and Deliver Hope Trailer mixed in. Big thanks to ou...
  20. commanderwyro

    3d Printed Halo Infinite Master Chief

    So since march ive been working on a halo infinite master chief cosplay. will be done 3d printing in maybe a week. heres some pics of some of it. i will try and post a lot more pics soon if i can remember to. i post a lot more on my instagram WyrosWorkshop . i will continue adding my pics and...
  21. KaeSpoon

    Need advice for fitting Halo armor on shorter people.

    (I hope I am posting in the right thead) Greetings 405thers! I am here simply to ask for some advice. I have been starting to work on a Halo MK V cosplay, something I've wanted to do for years- here's the problem: I'm 5'1-5'2. (Female, of course.) My head is around 22' around and I'm about...
  22. Dullestfungus39

    Halo reach armor

    Hello! I’m new and I’m making halo reach armor for my noble 6 helmet. RandomRanger
  23. Runkrod

    Current thoughts on armor styles

    Hey gang. Just getting back into the "Halo-verse" after a few years off. Am motivated to make a new set of armor but my brain is exploding from all of the options, styles, etc. I built a Halo 3 style MC a few years ago and was originally thinking I'd just move down the timeline and build a...
  24. FoamAndFoundry

    Foam & Foundry's ODST Build

    I've got some decent progress done on my ODST already but I figured I'd start a thread so it's documented somewhere. It's foam with the smaller torso bits 3d-printed, and probably the helmet as well. I was thinking of charcoal gray with olive green accents for the color scheme, with either OD...
  25. SpartanxNation

    my custom Halo Armor

    This is my own design the I am Attempting to transfer into an EVA foam helmet.
Top