cosplay armor

  1. Mechace13

    other Materials for cosplay

    ok i'm doing good on my first odst armor but i'm thinking about next year halloween party i go to and driving in the chest armor may not be a good idea. so are there other Materials I can use, not eva form for fiberglass and do you know where i can get the flies. the pic below is me back against...
  2. Its Hush

    1st Build Leather Armor Possible?

    Has anybody tried doing leather Halo armor? I started doing leather working about two months ago and I want to make armor, so I thought it would be cool to make leather Halo armor. The only thing is Would I stil be able to use the Same templates that would be used for Foam? Expecting the need...
  3. Shinrazilla

    New recruit - Where to start with Halo 2 ODST costume?

    I have never cosplayed or made any costume before. Everything looks pretty simple to make in this one, but I’m having trouble with the various pockets on the outfit and the helmet. I found this photo of an action figure for reference.
  4. JeffN02

    2D Con Minnesota 2021 info: Aug 27-29

    Hey everyone! Been ages since I’ve posted, or even been on here for that matter. So I figured, what better way to return than with a Roll Call for 2D Con in Minneapolis, MN Aug 27-29th! 2D Con is a small-ish convention bringing together video and tabletop gamers of all generations. They have...
  5. Mechace13

    thinking about starting over

    this is my first time and thinking about redoing it thoughts
  6. shadowbreakre

    Kingdom Hearts- Aqua's Armor - 3D Printable

    Here is the 3D printable Aqua Keyblade Armor from Kingdom Hearts. https://www.thingiverse.com/thing:4860141 The armor is pretty simple overall and would probably be better just making out of foam but since I was working on the helm I though I'd just do the rest. that said I only included the...
  7. Ninjavudu

    Need an Armor Smith

    Looking for someone to make a Teishin Raikou armor set for me from Halo 5 based on my in-game character. I need pricing before the start of the project so I can save up.
  8. PA Cosplay

    Legend of zelda ODST

    I've been working on this for a few weeks now so I thought I'd share my progress. Im making an OFST armor set but going for a legend of zelda paint style, ill also be making the master sword and shield for my weapons. I might make a small gun as well but don't know if ill have enough time for...
  9. bishopmilitaria

    Trying to create a 3d printed Covenant Elite

    Good day all, I am new here and I am looking to become one of the bad guys, a covenant elite of any sort. I have access to people with 3d printers. Does anyone know where I can find files? I have searched on google to no avail. Kind Regards from down under, Ben Bishop
  10. Lonewolfhowling

    Needing advice

    Hey everyone! I'm a new member, and fairly new to costume and prop making as well. I understand there are probably a bunch of threads already informing others on what to do, or how they can improve their craft, but I am asking for some personal advice. I started this project late last year...
  11. Mysticporo

    Just a thought on how to make an easier to get out of Halo chest piece.

    Just had a thought about how to make an easier to get out of cosplay Halo chest piece, so from my understanding people build cosplay to the standard of close to realism surely this leads to the issue of well how do you get out of the dang thing once it’s on. what if instead of trying to squeeze...
  12. Spartan J114

    Spartan 114's Mjolnir MK V Armour

    How's it going everyone. I'm Spartan 114 and I've been a Halo cosplayer/prop maker for about 3 years now and I've been using the 405th website for most of my journey. I never posted anything because of my lack of quality camera, I have recently replaced my old phone with a new one and as such I...
  13. 20190704_171612-01-01-01.jpeg

    20190704_171612-01-01-01.jpeg

  14. Helmet. Png

    Helmet. Png

  15. Spiderboy196

    Scaling certain body pieces in pep

    I been working on my spartan build for 4 months now and hit a setback: scaling specifically, the thighs. How does one know if the scaling is too big or too small? And how can one get it to close as just about right? This is just a struggle for my 5'8 short self
  16. 939.jpeg

    939.jpeg

    Me in my odst costume
  17. Crusader1080

    Continous Improvement

    Hello! This will be the first of many posts on improving my Master Chief pepakura that I completed and worn for Comic Fiesta 2019 (Basically Malaysian comic con), after the event, I decided to repair and continuously improve based on the experiences before, during and after the con. First...
  18. Fisherk2

    Onyx Guard Gears of war cosplay progress

    (Spanish) Buenos dias, tardes o noches para todos, bueno, como me prometí este fin de año, decidí remasterizar uno de mis primeras armaduras, en este thread explicare todo lo que tuve que hacer para terminarlo, sin mas, explicare lo primero...
  19. Crusader1080

    Bringing out to the field after a long year of building

    Project duration: September 2018 to December 2019 (15 months) Construction method: Pepakura with Epoxy resin Photo taken: 20 & 21 December 2019 Photo credit: @arifdale from Instagram Photo taken during Comic Fiesta 2019 at KLCC, Kuala Lumpur, Malaysia
  20. AlphaGuardian88

    Soft Parts 3D printed armor

    Hi so I am relatively new and would like to know if anyone happens to have the files for 3D printing some Halo 5 Mark IV Gen 2 armor and Mark V helmet not using foam. If anyone does happen to have it please if you'd be so kind as to help me out it would be appreciated
  21. Hekok

    Halo 5 Achilles Progress build

    So with HOD coming to Houston at August 16th, I'll try attending there, with a suit of Achilles armor. Now, it is only a month away, and I am currently modifying a in-game model of the armor through Blender. I've posted a couple of other things before asking about adding extra detailing and some...
  22. PlanetAlexander

    Halo CE Marine Cosplay

    Hey 405th, posting here instead of the RPF to show the development of my Halo Combat Evolved Marine cosplay. I'm using this EXTREMELY helpful thread for nearly all my references (thank you Jubal for all the shots!). So far I've done the bulk of the helmet, done the shoulders and now working on...
  23. Fisherk2

    My Gears of War cosplay progress

    (SPANISH) Buenos dias gente de la 405th, hoy tengo tiempo libre, asi que voy a subir todos mis progresos de mi otro cosplay del videojuego de Gears of War, en especifico, el de la armadura de la Coalicion basica (que lo llevan los soldados de la COG, Baird, Minh y los Carmine), con la variacion...
  24. L

    3D Printer and Software Questions.

    Aye, everyone, I'm not the best at costume stuff also I'm saving up for a 3D printer. So I have some questions about 3D printers as a whole and what to look out for. What type of software is useful when printing out your armor or a prop for example? What type of 3D printer that always gets...
  25. Alana Jayne

    First armor build (Need help)

    Hello everyone! My is Alana, my friend Nick and i are planning our first armor build but we need some advice and help. Nick wants to build a Halo 3 Master Chief suit and I want to build the Praetor suit from DOOM 2016. We know little about EVA foam builds and would like some help. I've looked...
Top