helmet

  1. SonOfTheGun

    Need advice making one way mirrored visor

    Hey all, I am just starting on my first build and i decided to go with Emile from Reach. I am 3d printing the entire helmet other than the visor and will probably use the 3d print to make a fiberglass mold. My question begins with the visor. I am going to try and heat form acrylic sheeting...
  2. Deviss65

    Xcoser ODST Helmet Repaint & Potential Full Build

    I guess this is the start of my ODST journey, I've got the skillset now that I think I can create some cosplay work that would be up to my own standard and sorting a helmet is the first part of that journey. I've got a few ideas on how to build the full armour but for now I think well keep this...
  3. ODCA

    ODCA's foam unfolds (and unfold requests)

    Hello 405th! Recently I've been unfolding a lot of pepakura files for foam and learning a lot of neat tricks with the program And I wanted to give back to the community that has done so much for me So I'm making this thread to post the unfolds I make and I'll also be taking unfold requests for...
  4. ODST Helmet

    ODST Helmet

    And here's the helmet of my ODST, the topping to this beautiful piece. The Helmet is made of EVA Foam which makes it super light and breathable.
  5. Hakuru15

    Finished putting together my Halo 2 Anniversary ODST Helmet

    Finally finished putting together the Pepakura file which is located in the 40th armory: Halo 2 Anniversary ODST Pepakura File I was very surprised in how easy the PDO file was, the folds were really, really easy and i didn't had many problems with it, and i manage to keep it as even as much...
  6. BigMoney911

    Need an Emergency Visor Solution - Motorcycle Visor did not arrive and Con is next week.

    Hey team. I'm almost finished my Mark V suit. Just need to do some sealing and painting. For the helmet, I ordered a cheap motorcycle visor on Aliexpress over two months ago... and it hasn't arrived. The estimated delivery was supposed to be for the 21st.. .of September, and tracking isn't...
  7. Robg51

    Props Looking to buy custom helmet!

    Hey everyone! Im new to the scene so i apologize if im doing something wrong here. But im looking to buy a custom grenadier Jorge helmet. I would also like it to have fans in it because i will be wearing it for long periods of time. I dont know too much about material, but i would like to stay...
  8. shaneDark515

    Halo helmet foam

    hi guys, modify several files to make it easier to put them together and cut them, I want to share them with you, I hope it works for you and you like it.
  9. S

    Covering visor for painting

    I have my helmet mostly as I like it, but the epoxy putty I put around the visor is noticeably green. I'm wondering what the best way to cover up the visor for repainting would be. I am unable to just use a brush as I'm not good at mixing colors.
  10. tvanhelene

    I made a vacuum formed PETG visor for my MK5B helmet. What would be the best way to add a mirrored tint?

    I was considering using the Ipoly dye, however, that would only give me a tint and not any reflectivity. I've need other posts here saying I could use an airbrush with a specific paint, however I don't have an airbrush. What is a different way I could get a reflective 1-way finish on the visor?
  11. CollinMcCaf

    Pilot Helmet (H3)

    Wanna see more? Be sure to check out CollinMcCaf's Model Repository! This model as well, as others, are available for download through the link above! A surprise model I've been working on, the pandemic has given me enough time to finish it; here are some quality renders. I know at least a few...
  12. IrrationalSound

    WIP Foam MK V Build

    This is my first time making a post like this, but I'm hoping to start making a lot more posts of what I've worked on and what I am working on. This isn't my first build, and hopefully won't be my last either, will probably post comparisons with my previous sets. Any way here is what I am...
  13. AldaDino096

    Texture, and thx to all

    Good afternoon to all everyone, I write from Spain. I open this post because I wanted to ask a favor, I've been here for a while, but recently I have been `` active '' again, A couple of weeks ago I downloaded the model of [Halo 5: Guardians - MJOLNIR GEN2 - Warrior 1.0] The model in general is...
  14. R1g0rM0rt1s

    Recon GEN2 helmet build (w/ progress pics)

    Hey all! This is my first project. I hope you like it! So I started off by picking up a raw cast of the Recon GEN2 helmet on etsy, as I don't have any sculpting experience. By far the longest part of this build was waiting for the helmet to arrive. When it finally arrived, I got to work...
  15. V

    10% can make all the difference

    Making gentle progress with a Master Chief build and I wanted to share how 10% made all the difference. I started with a helmet scaled exactly to my head, but I couldn't get the damn thing on without butchering it... a lot. So I went back into Pepakura and scaled it up 10% with a single action...
  16. P

    Practicing 3D modeling - need photos

    Hello! I’m currently working on becoming more adept with 3D surfacing in Solidworks, and am recreating helmets as practice. However, since I want to be as accurate as possible - I like to have reference photos to sketch over. That being said, does anyone know the best way to go about getting...
  17. ItermiinateX

    Halo 2/3 Arbiter Helmet Build

    *PIC HEAVY* My first step was to use the pepakura files from the Armoury to build the base helmet using 5mm foam. I also built the Elite head pep to make sure the two fit together I pinned on some strips to make sure it held the right shape before slushing some plaster on the inside. This...
  18. M

    Looking to Commission Someone?

    Seems like a bit of a long shot but is there anyone out there who could do an EVA foam Halo 4 Mk. VI helmet for me? (Chief's helmet not the multiplayer version.) It just needs to be the raw foam, no paint or visor required.
  19. TheTrenchSlayer

    Edmonton Alberta area help?

    I’m very new to all of this and I’m a fan of the halo universe since 2008 when I was 5 and I live in the Edmonton Alberta Canada area and was wondering if anyone could help or possibly give hand me downs my head size is 62 my height is 63 and I weigh about 200. I’m really into the ODST armor...
  20. Sarcasticheavy

    My first helemt

    This is my first attempt at a Eva foam ODST set using Andrew DFT templates (which are now free) along with the video series, I'm going for a white and red with black decal, going medic for this one! Only issue is I used a pen to mark stuff on the foam now it keeps seeping through the paint, any...
  21. Nox Umbra

    Raijin Helmet

    Starting work on my Raijin Helmet today. The design for the helmet is from BMP props.
  22. SpartanProps

    Noble 6 halo reach build

    Hey everyone! I thought i would post my build progress for my noble 6 costume that i debuted at calgary comic expo! Since its done and not in progress im not really sure what order to do the picturtes in, so i will do my best to post in clusters of what i did and explain what i have done c...
  23. Akoolpoptart

    Titanfall 2: 3D Printing/Pepakura questions

    Hello, I was recently able to acquire some of the Titanfall 2 pilot models and got the idea of adding a Holo Pilot helmet to the helmet collection I'm starting since it's been my main since I unlocked the ability. However I am very inexperienced and have almost zero knowledge on how to make...
  24. TheJohnW3d

    ODST Paint

    Hey Everyone! Im having some trouble figuring out exactly which paint to use for my ODST build. It appears as if its some kind of metal gray or gunmetal? and somtimes it appears matte and has scratches to reveal a silver fresh exposed metal. Would love to see pictures and recommendations :)...
Top