RadioactiveMicrobe
Well-Known Member
Excuse me, would it be possible for anyone to make the Maj. Pain unfold of the chest also compatible with PD2 as well?
Carmine Armor
- Thread starter azneraz
- Start date
- Status
RadioaciveMicrobe said:
i get the same issue though i just use pepakura designer 3, if u needa scale the chest, just write it down then every time u open up pepakura designer 3 just pop thouse didgets in. Or do it once and then print them all out and presto. but in highnsight someone should be able to do it but not me though, i hope this helps for the time being =D enjoy!
Last edited by a moderator:
Matus Fenix
New Member
Maybe Shackz armor files should posted at this thread link -
http://405th.com/forums/index.php?showtopic=8197
When I was using this armor file, I've got mixed up with the mountain fold and valley fold on the knee cap part. They've both seem to be mixed up. The ----- is valley fold and other one is suppose to be mountain fold. Just got really confused.
http://405th.com/forums/index.php?showtopic=8197
When I was using this armor file, I've got mixed up with the mountain fold and valley fold on the knee cap part. They've both seem to be mixed up. The ----- is valley fold and other one is suppose to be mountain fold. Just got really confused.
JOLTY TacoMan
Active Member
could we get another link for the A. Carmine Bucket because every link is broken
EDIT: nvm i just googled carmine PDO and it was the first link
EDIT: nvm i just googled carmine PDO and it was the first link
Mustangseatrice05
Member
wow you guys rock . I have been looking for the Carmine chest for awhile . I am starting the carmine helmet and now I have this to go with it. Trying to finish it before halloween . My buddy is almost done pepping the entire marcus costume so I gotta catch up.
sapperbullet
New Member
LameSuace said:
Does anyone have the Old Knife and Lancer files from the post above, thought i would ask here and not necro the other post.
Edit : found the Knife
Last edited by a moderator:
Just wanted to share a couple of build pix with you guys. If anyone is undertaking this build, I have a couple of notes you may need to consider:
The lower part of the armor is really snug due to the tapered waist. If you have a rounder shape, this model will have to be altered(Im 5'9", 150lbs, athletic build).
Also due to the nice detail in the collar and the smaller bottom section, a hatch has to be cut out of the side like PSberetta's armor(If you are unfamiliar with his work you can find it in the Cog Armor sticky).
Anyways, thanks again to Shackz for the great files and I'll post more as I pep the boots and the knees.
Free Image Hosting by ImageBam.com
The lower part of the armor is really snug due to the tapered waist. If you have a rounder shape, this model will have to be altered(Im 5'9", 150lbs, athletic build).
Also due to the nice detail in the collar and the smaller bottom section, a hatch has to be cut out of the side like PSberetta's armor(If you are unfamiliar with his work you can find it in the Cog Armor sticky).
Anyways, thanks again to Shackz for the great files and I'll post more as I pep the boots and the knees.
Free Image Hosting by ImageBam.com
Here is a collection of all the files I have. It contains a full set of Fenix files, a full set of Carmine files, the Lancer, the Gnasher, the Torque Bow, and a few other weapons files that aren't unfolded yet. I also added a model of the Theron if someone was willing to break it up so we could have some Theron Armor, which would be effin awesome. Anyways, enjoy and thanks in advance to anyone who takes on the challenge of breaking up the Theron file.
Maj. Pain
http://hotfile.com/dl/8158697/735826b/GEARS_OF_WAR_COLLECTION.rar.html
*edit*
Full Credit Goes To All The Original Artist, Modelers, and Unfolders
Maj. Pain
http://hotfile.com/dl/8158697/735826b/GEARS_OF_WAR_COLLECTION.rar.html
*edit*
Full Credit Goes To All The Original Artist, Modelers, and Unfolders
*WARNING*
Sorry for the double post, but MaliciousJedi13 brought to my attention that the mountain and valley fold for the shoulders and knees are backwards. The edge id is also not in the right spot either, but if you play with the settings you can get everything buildable.
Sorry for the double post, but MaliciousJedi13 brought to my attention that the mountain and valley fold for the shoulders and knees are backwards. The edge id is also not in the right spot either, but if you play with the settings you can get everything buildable.
Last edited by a moderator:
Mustangseatrice05
Member
Sorry for the double post, but MaliciousJedi13 brought to my attention that the mountain and valley fold for the shoulders and knees are backwards. The edge id is also not in the right spot either, but if you play with the settings you can get everything buildable.
[/quote]
As of last night I found that the boot folds are backwards as well . All you really have to do is fold opposite of what they say or reformat them in pep. So as of right now the only pieces not backward for Carmine are the chest and helmet . nobody knows yet about the shoulders. when I try those I'll let everyone know.
[/quote]
As of last night I found that the boot folds are backwards as well . All you really have to do is fold opposite of what they say or reformat them in pep. So as of right now the only pieces not backward for Carmine are the chest and helmet . nobody knows yet about the shoulders. when I try those I'll let everyone know.
RadioactiveMicrobe
Well-Known Member
MaliciousJedi13 said:
As of last night I found that the boot folds are backwards as well . All you really have to do is fold opposite of what they say or reformat them in pep. So as of right now the only pieces not backward for Carmine are the chest and helmet . nobody knows yet about the shoulders. when I try those I'll let everyone know.
[/quote]
They can be changed, juat go to "line style configuration" I believe
Last edited by a moderator:
Turgid Sturgeon
New Member
Great work on the helmet, It looks like you took your time and aligned everything nicely. I built one a few months ago for my 5 year old son, but the ear piece was just too much once you scale it down that much. Anyways, Im working on a re-unfold for the boots and im going to fix the line issues too. I'll post here once im done and I'll get it on the official COG Sticky as well.
Maj. Pain
Maj. Pain
poosandwees
Member
Well have any of you gears enthusiasts heard of the GOW forum site?
Hi guys, sorry for my lack of interativity on the forums but i have life hassles at the moment and life comes first. but im am back and forth from the forums and iam glad to hear that people are happy with the files despite some fold issues i will endeavor to watch this tread and any other GoW projects that pop up in the near future and hope to get back to detailing and finishing of the Carmine helmet.
GamerGear said:
Hey dude, umm progress is slow atm still need to work out what im going to do with the eyes and eye lights etc although i got a thread already up along time ago there is pics up there and ill keep adding to that thread, heres the link enjoy =D
http://405th.com/forums/index.php?showtopic=15839&st=0&p=249218&#entry249218
Last edited by a moderator:
Adam Anderson
Member
is there a gears of war 2 ben carmine helmet, or that helmet that is only in gears of war 2 campaign?
- Status
