- Member DIN
- S2424
Hey guys, I took a personal break from my M247H build for a bit.....The last section is giving me agida....so this weekend I though " Hey let me work on something else to clear the pallet". I had started a sliced version of the AR like I did w/ my DMR.......but it didn't come out so well. So lets start again ........in EVA foam. I didn't take pictures of the very beginning.....but here is what I do have:
Things left to do:
The front end isn't fully glued (I ran out of hot glue)
I have some more detailing to cut in to the top
The barrel and tactical light
A hell of a lot of sanding
Redo of the very front of the rifle....I put one of the pieces in wrong
Painting
I have to say, after building his SMG and M6...I was a bit hesitant to do so as they were a bit on the flimsy side, but this turned out much better than I expected. There is just 1 section in the middle that has the most play in it. Not a real issue but just the only flaw in the whole build I didn't insert any dowels or rods but that is something to consider for the next time. And yes I will build another one of these......
Things left to do:
The front end isn't fully glued (I ran out of hot glue)
I have some more detailing to cut in to the top
The barrel and tactical light
A hell of a lot of sanding
Redo of the very front of the rifle....I put one of the pieces in wrong
Painting
I have to say, after building his SMG and M6...I was a bit hesitant to do so as they were a bit on the flimsy side, but this turned out much better than I expected. There is just 1 section in the middle that has the most play in it. Not a real issue but just the only flaw in the whole build I didn't insert any dowels or rods but that is something to consider for the next time. And yes I will build another one of these......