EVA/Fiberglass Hybrid Master Chief Build


BigDaveActual

New Member
Howdy!
Lost the info for my old account so here I am on the new one!

Just wanted to share my first armor build with y'all!
I don't have many pics of the build process but I collected all I could. This build was about 3-4 years ago.

THE BUILD:
I made the base out of EVA and painted it but wasn't happy with it. I decided to coat it with fiberglass on the inside to strengthen it up in some parts but I also used some pour on high gloss table finish because it is slightly more flexible than fiberglass resin! Haven't seen other people do this so this was kind of a test.

THE TECH:
On the inside of the helmet I used an Arduino soundboard and put buttons in the center I could push with my tongue haha. It works surprisingly well!

IMG_4261.JPG
IMG_4260.JPG
IMG_4268.JPG
IMG_4262.JPG
IMG_4263.JPG
IMG_4264.JPG
IMG_4265.JPG

IMG_4259.JPG


Chief Helmet In The Sand.jpg
IMG_4269.JPG
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top