Halo 4 Gen 2 Mk VI Multiplayer

Status
Not open for further replies.

moderndaymarc

Member
Hey all! I'm starting a Halo 4 Gen 2 MK VI build, just early stages of pep and research. I usually am more efficient when it comes to this sort of request, but I'm asking if any of you have some good close ups or high res pics, or screenshots, of the generation 2 Mark VI. I've searched for a while now, and only seem to find the same few pics, and it's always just the front (I need back, sides, etc)

Any reference help would be much appreciated!!!


Will post some pics of the chest as I'm getting it put together. Updates to come.
 
Re: Reference help!! For Gen 2 MK VI WIP

Hey all! I'm starting a Halo 4 Gen 2 MK VI build, just early stages of pep and research. I usually am more efficient when it comes to this sort of request, but I'm asking if any of you have some good close ups or high res pics, or screenshots, of the generation 2 Mark VI. I've searched for a while now, and only seem to find the same few pics, and it's always just the front (I need back, sides, etc)

Any reference help would be much appreciated!!!


Will post some pics of the chest as I'm getting it put together. Updates to come.

We have raw, in-game models and textures in the Archives - if you know your way around a modelling program it wouldn't be a hard fetch for you to create your own references from the resources we have here on-site.
 
Re: Reference help!! For Gen 2 MK VI WIP

It's not the Mk VI, but Master Builder has some really great reference shots of the undersuit in his thread here.
 
Re: Reference help!! For Gen 2 MK VI WIP

We have raw, in-game models and textures in the Archives - if you know your way around a modelling program it wouldn't be a hard fetch for you to create your own references from the resources we have here on-site.


that sounds really awesome and helpful, but I do not know modeling programs :/ not to mention, I don't even know what files those are
 
Re: Reference help!! For Gen 2 MK VI WIP

Not too exciting, but here's my first update. I was a bit intimidated by taking on this build, what with it's high level of detail, and VERY complex pep files. But, taking my time and going at a slow pace has shed any doubt I had about building this. What really helps is reducing the number of individual pieces per file by moding the pep file through joining pieces together that don't need to be separate. Case in point, I took this chest piece from 340 pieces, down to about 273. Makes quite a difference, haha. Any who, after two nights, I have the front of the chest pepped out:


28854855425_5c3378d1a6_b.jpg
28862149995_82b3a071b5_b.jpg
28245063514_0f66907c84_b.jpg
28757564302_a50cb070c3_b.jpg


Once again, if any of you have screen grabs, or nicely detailed pics of the Halo 4 MK VI, I would be very thankful if you could send them my way or post them here. More updates to come as I start the back of the chest tonight!
 

Attachments

  • 28854855425_5c3378d1a6_b.jpg
    28854855425_5c3378d1a6_b.jpg
    126.2 KB · Views: 252
  • 28862149995_82b3a071b5_b.jpg
    28862149995_82b3a071b5_b.jpg
    112.9 KB · Views: 241
  • 28757564302_a50cb070c3_b.jpg
    28757564302_a50cb070c3_b.jpg
    96.1 KB · Views: 252
  • 28245063514_0f66907c84_b.jpg
    28245063514_0f66907c84_b.jpg
    99.1 KB · Views: 243
Re: Reference help!! For Gen 2 MK VI WIP

Not a very exciting update, but I got the shoulder tops done. These took me a whole night, but probably because I was taking my time and going real slow because there are a lot of small folds and tabs. Enjoy:

28812268222_199c190c8c_b.jpg
28812266682_29d7a11db1_b.jpg


Can't wait to get off work and get back to it!
 

Attachments

  • 28812268222_199c190c8c_b.jpg
    28812268222_199c190c8c_b.jpg
    103.6 KB · Views: 235
  • 28812266682_29d7a11db1_b.jpg
    28812266682_29d7a11db1_b.jpg
    138.3 KB · Views: 227
Re: Reference help!! For Gen 2 MK VI WIP

Slow isn't always bad. Especially with smaller pieces, and folds. Looks like is paying off for you, nice clean pep! Just the way I like it!
 
Re: Reference help!! For Gen 2 MK VI WIP

got the back part of the torso all pepped out:


28698095890_5dd8c436f8_b.jpg
28984073245_b60858d726_b.jpg
28984076115_a438c3f33c_b.jpg
28698117380_1aed2ba02c_b.jpg
28698125340_ac0bfc2785_b.jpg
28698107710_607fece44c_b.jpg
 

Attachments

  • 28984073245_b60858d726_b.jpg
    28984073245_b60858d726_b.jpg
    124.2 KB · Views: 229
  • 28698095890_5dd8c436f8_b.jpg
    28698095890_5dd8c436f8_b.jpg
    132.8 KB · Views: 236
  • 28698117380_1aed2ba02c_b.jpg
    28698117380_1aed2ba02c_b.jpg
    134.2 KB · Views: 252
  • 28984076115_a438c3f33c_b.jpg
    28984076115_a438c3f33c_b.jpg
    128.2 KB · Views: 239
  • 28698125340_ac0bfc2785_b.jpg
    28698125340_ac0bfc2785_b.jpg
    144.2 KB · Views: 253
  • 28698107710_607fece44c_b.jpg
    28698107710_607fece44c_b.jpg
    104.7 KB · Views: 244
Alright, I got super lazy and just gave up on this build, but no more! Also, nothing like an awesome convention to set a deadline for you and get you nice and motivated, haha. So, moved onto the bicep/shoulder piece. Fun, easy model to build, which is nice because I had to re-size this thing four times until I was happy with it. Here are a few pep pics:

32551146915_f252389e27_c.jpg

32398289172_d8857a3008_c.jpg

31707287654_71e6956c33_c.jpg

32398285192_ef7c508713_c.jpg

32398284552_db40346ed2_c.jpg


More to come soon
 
What pep files you using. I want to make a MK VI build but there's just so many files I can't decide lol. Anyways I like the way your build looks, and if you could hook me up with the pep files that would be awesome.
 
Not a very exciting update here, but a little more progress has been made:


32570048896_11104b7d84_b.jpg

32570046346_00f6f0e664_b.jpg

32570046076_3f327ec398_b.jpg

32610559715_a77bbecc88_b.jpg



So I have the two shoulder/bicep pieces, and the full chest piece started with the initial single layer of resin on the outside. Also added some custom braces for the chest and bicep to prevent warpage. Next comes laying down some fiberglass! More to come soon.
 
Looking good bro! I always did like the look of that torso variant.

Thank you very much!! Took a long time to pep, but completely worth it.

Nice pep work. Everything looks to be shaping up really well!

Thank you as well! Slowly, but surely.



Ok, so a couple more progress pics, kinda boring.

Got the shoulder "thruster" things half glassed:
32670321105_7c9c6b41b2_c.jpg


Got the biceps half glassed:
32291342420_4f1be95c52_c.jpg


And a few of the connecting areas of the chest piece:
32670323165_e79dc72592_c.jpg

32670322265_32eb9382d2_c.jpg



I've noticed that I really like taking my time, and glassing pieces a couple sessions at a time, rather than a whole piece all in one sitting. For me, it seems to significantly lower the possibility for warping, or pieces not fitting together correctly after they've been split, ie the chest piece. That's it for today, gotta get cracking on peping the helmet...
 
Wow Nice job , really admirating of your pep . You have such a quality!!!
Currently workingon the same build , I'm really impressed by your work .
Keep going :)
 
Wow Nice job , really admirating of your pep . You have such a quality!!!
Currently workingon the same build , I'm really impressed by your work .
Keep going :)

Thanks man! You should post your build, I'd love to see your progress too.

Not too big of an update, but I got the helmet all pepped out:

31904040964_63d4f90d7c_c.jpg

32593610882_3e26a24d09_c.jpg


31904044114_229a7bb278_c.jpg


32706274876_1bea8d0953_c.jpg

32367150530_cd0e602320_c.jpg

32593603412_6e8df30c18_c.jpg

32706272636_81befa097e_c.jpg
 
Alright, so I have the chest piece split, and fiberglassed, and started a bit of bondoing. The thrusters are sanded down and ready for spot putty. And the ab and cod pieces have details drawn on that I plan on making with my dremel. Enjoy!

32657450081_86e9947d4c_b.jpg

31966754953_9051c0032a_b.jpg

31966743493_bab1bb87d7_b.jpg

32780882095_94e49d4e42_b.jpg

31937703484_1f08b0458c_b.jpg

31937705604_8bb7e7e1b7_b.jpg
 
Status
Not open for further replies.
Back
Top