Halo 4 Masterchief Gloves Build

Status
Not open for further replies.

Xtremenoob

Active Member
So after finishing my needler i have been wanting to do this for a while, I have been working on this for a few days and hopefully get them finished and make alot of latex gloves.
The first 2 pics are showing the placement of the armour parts that will be later embedded into the clay. The pics after that was from today's work molding and casting and just needs a run over with spot putty and a sand before i apply the primer. And the last pic is a test of the hex pattern as to see the scale of the hex on the side of the palm.

So here starts the build pics, enjoy the ride.

16400602986_ff1801ef2f_z.jpg002
16424820491_196f345eae_z.jpg001
16424822781_e95107a730_z.jpg001
16238944458_87edab6170_z.jpg002
16426584925_3ff17abfe5_z.jpg003
16240677227_b38de91163_z.jpg004
16426571805_102de49bcc_z.jpg005

Until next time
Daniel
 

Attachments

  • 16400602986_ff1801ef2f_z.jpg
    16400602986_ff1801ef2f_z.jpg
    90.4 KB · Views: 1,024
  • 16424820491_196f345eae_z.jpg
    16424820491_196f345eae_z.jpg
    92.3 KB · Views: 267
  • 16424822781_e95107a730_z.jpg
    16424822781_e95107a730_z.jpg
    91.6 KB · Views: 225
  • 16238944458_87edab6170_z.jpg
    16238944458_87edab6170_z.jpg
    105.5 KB · Views: 235
  • 16426584925_3ff17abfe5_z.jpg
    16426584925_3ff17abfe5_z.jpg
    106.1 KB · Views: 238
  • 16240677227_b38de91163_z.jpg
    16240677227_b38de91163_z.jpg
    93.8 KB · Views: 231
  • 16426571805_102de49bcc_z.jpg
    16426571805_102de49bcc_z.jpg
    71.8 KB · Views: 251
Great job so far!!

Did you start off with a print to build from?

So you're going to make that clay pattern all around the hand and then make a mould of the hand to cast in latex?
 
Great job so far!!

Did you start off with a print to build from?

So you're going to make that clay pattern all around the hand and then make a mould of the hand to cast in latex?

it's all body filler, printing was not necessary for these and yes once the hand is sculpted i will be molding and casting it in latex

looks good is the clay chiefs combat skin

thanks

Update

This is where im at

16651622328_eef780fcfc_z.jpg001 by daniel.bignoux, on Flickr
16839199575_039732194b_z.jpg002 by daniel.bignoux, on Flickr
16653064059_84a14e3147_z.jpg003 by daniel.bignoux, on Flickr
16653059249_0f7069ccb9_z.jpg004 by daniel.bignoux, on Flickr
16838055602_1f5aacb632_z.jpg005 by daniel.bignoux, on Flickr


Until Next time
Daniel ;)
 

Attachments

  • 16651622328_eef780fcfc_z.jpg
    16651622328_eef780fcfc_z.jpg
    91 KB · Views: 233
  • 16653064059_84a14e3147_z.jpg
    16653064059_84a14e3147_z.jpg
    60.7 KB · Views: 199
  • 16839199575_039732194b_z.jpg
    16839199575_039732194b_z.jpg
    92.4 KB · Views: 235
  • 16653059249_0f7069ccb9_z.jpg
    16653059249_0f7069ccb9_z.jpg
    90.7 KB · Views: 247
  • 16838055602_1f5aacb632_z.jpg
    16838055602_1f5aacb632_z.jpg
    88.6 KB · Views: 190
Last edited by a moderator:
That video makes you appreciate just how time consuming this would be, and then to make 2 mirrored copies...
Looking very spot on.
I am impressed. :)
 
Yes finally, One of the hands have been molded and it still needs a clean up but it's looking great. the seam line is clean and the hex pattern came out great. Next step is to do a test cast in latex so i know how to make it at the right thickness.

16924506251_c38c02f737_b.jpg002
16899576346_86e7cc5193_b.jpg003
16924490831_0ccf70c3b4_b.jpg006
16718167347_d0cb27df8e_b.jpg004
16924496021_69ef442306_h.jpg005 by daniel.bignoux, on Flickr

Until next time ;)
Daniel
 

Attachments

  • 16924506251_c38c02f737_b.jpg
    16924506251_c38c02f737_b.jpg
    241.9 KB · Views: 234
  • 16899576346_86e7cc5193_b.jpg
    16899576346_86e7cc5193_b.jpg
    289.2 KB · Views: 176
  • 16924490831_0ccf70c3b4_b.jpg
    16924490831_0ccf70c3b4_b.jpg
    237.9 KB · Views: 211
  • 16718167347_d0cb27df8e_b.jpg
    16718167347_d0cb27df8e_b.jpg
    199.1 KB · Views: 204
  • 16924496021_69ef442306_h.jpg
    16924496021_69ef442306_h.jpg
    474.5 KB · Views: 249
UPDATE :
Im not crazy, i just build stuff that looks cool from my perspective xD

So here are the pics of the test glove with cheese cloth embedded in the second layer to make it more durable

16779486079_41a8e76123_z.jpg008 by daniel.bignoux, on Flickr
16779483339_247e87ae1f_z.jpg009 by daniel.bignoux, on Flickr
16345583023_bd292d678d_z.jpg010 by daniel.bignoux, on Flickr
16345582453_e43f17af3b_z.jpg011 by daniel.bignoux, on Flickr
16779470959_11a94d8e72_z.jpg012 by daniel.bignoux, on Flickr
16964732081_7bf0ecca46_z.jpg013 by daniel.bignoux, on Flickr
16777966078_bf936f1a89_z.jpg014 by daniel.bignoux, on Flickr

I will be casting the real gloves using black latex rather then the white/cream colour

So until next time ;)
Daniel
 

Attachments

  • 16779486079_41a8e76123_z.jpg
    16779486079_41a8e76123_z.jpg
    49.4 KB · Views: 283
  • 16779483339_247e87ae1f_z.jpg
    16779483339_247e87ae1f_z.jpg
    67.7 KB · Views: 220
  • 16345582453_e43f17af3b_z.jpg
    16345582453_e43f17af3b_z.jpg
    52.2 KB · Views: 292
  • 16345583023_bd292d678d_z.jpg
    16345583023_bd292d678d_z.jpg
    42.1 KB · Views: 280
  • 16779470959_11a94d8e72_z.jpg
    16779470959_11a94d8e72_z.jpg
    63.4 KB · Views: 183
  • 16964732081_7bf0ecca46_z.jpg
    16964732081_7bf0ecca46_z.jpg
    68.8 KB · Views: 222
  • 16777966078_bf936f1a89_z.jpg
    16777966078_bf936f1a89_z.jpg
    73.6 KB · Views: 228
Last edited by a moderator:
Absolutely gorgeous. Weighing up whether I have the patience to embark on this journey for my undersuit/components
 
This looks really good, but it also seems like it'd be really uncomfortable to wear, particularly since latex, as far as I know, doesn't really let air or moisture through. Are you planning on lining them with something a bit more comfortable, or are you somehow okay with the feel?
 
This looks really good, but it also seems like it'd be really uncomfortable to wear, particularly since latex, as far as I know, doesn't really let air or moisture through. Are you planning on lining them with something a bit more comfortable, or are you somehow okay with the feel?

Its almost as the same latex glove you would find under the sink, it is something you have to deal with. The intention of the build was to have more of an accurate look for pics and photo shoots rather then the soft microfibre/nylon mesh/leather work gloves that are designed for comfort, withstand the wear and tear because that is what there made for and all of them are not accurate to chiefs gloves. There are many of costumes out there that are the same for instance most predator suits are completely made out of the same latex im using as well as most monster costumes.
 
Its almost as the same latex glove you would find under the sink, it is something you have to deal with. The intention of the build was to have more of an accurate look for pics and photo shoots rather then the soft microfibre/nylon mesh/leather work gloves that are designed for comfort, withstand the wear and tear because that is what there made for and all of them are not accurate to chiefs gloves. There are many of costumes out there that are the same for instance most predator suits are completely made out of the same latex im using as well as most monster costumes.

It'll help to throw in some baby powder before extended wear at least.

Just out of curiosity, will you be offering these in the future? This is ideal to how it should done (I can't sew anything anyways). I only hope you have large hands though!
 
It'll help to throw in some baby powder before extended wear at least.

Just out of curiosity, will you be offering these in the future? This is ideal to how it should done (I can't sew anything anyways). I only hope you have large hands though!

yeah i had to put baby powder so its easier to put on. I will be selling these and as for hand size i would say its about medium to large but i will find out what is the maximum size hands that can fit the glove.
 
Status
Not open for further replies.
Back
Top