Halo 5 Guardians Weapons For 3D Print

Discussion in 'Halo 3D Modeling' started by Mflanny34, Jan 6, 2015.

  1. Mflanny34

    Mflanny34 Member

    I already have a thread with halo 3, 4 & 5 stuff in the props section. This thread will be updated with only halo 5 stuff, but id go check out my other thread for some Halo 4 casts soon.
    Link in my signature.
    Halo 4 MA5D (Pre-orders filled for now)

    On to the good stuff. I do plan on making every Halo weapon at some point, so I am not taking requests. In progress right now are the AR, Hydra, & SMG. As the grenade from halo 4 to 5 has not changed, I will also include it here. These models will not be released, however casts will eventually be available. Weapons will have features such as LCD ammo counters, working triggers, bolts, safety's, stocks, sling mounts, scopes, sights, grips etc. Final renders will be in HD. Completed so far are the M9 grenades, the sniper rifle round, and the shell and round from the hydra. In progress are the SMG, AR, and Hydra.
    SNIPERROUND1_edited-1_zps75b78788.jpg
    SNIPERROUND2_edited-1_zps339e67b9.jpg
    SNIPERROUND3_edited-1_zps9b9b9851.jpg
    NADE2_edited-1_zpsfdf2cd1a.jpg
    SHELL2_edited-2_zps0052c68e.jpg
    SHELL4_edited-1_zps7d566866.jpg
    asdfghjkljhgfds_zps6420d8a8.jpg
    122_zpsb2005899.png
    2222_zpsb7c88f86.png
    render_zpsac12c0b1.jpg

    SNIPERROUND1_edited-1_zps75b78788.jpg

    SNIPERROUND2_edited-1_zps339e67b9.jpg

    SNIPERROUND3_edited-1_zps9b9b9851.jpg

    NADE2_edited-1_zpsfdf2cd1a.jpg

    SHELL2_edited-2_zps0052c68e.jpg

    SHELL4_edited-1_zps7d566866.jpg

    asdfghjkljhgfds_zps6420d8a8.jpg

    122_zpsb2005899.png

    2222_zpsb7c88f86.png

    render_zpsac12c0b1.jpg
     
    GeneralMayhem and DUMDUMBOT like this.
  2. Mflanny34

    Mflanny34 Member

    Here, as promised is the updated render.
    SHELL10_zps9202f4cb.jpg

    SHELL10_zps9202f4cb.jpg
     
    GeneralMayhem likes this.
  3. elusch99

    elusch99 Jr Member

    Why is everything you make so good? It makes me just want to stop modeling

    But seriously, nice job!
     
    TheUX31EGuy and Mflanny34 like this.
  4. Mflanny34

    Mflanny34 Member

    Never stop modeling! Thanks

    Update on the chamber, each orange tab can be pulled to pop out the shell and then the shell comes apart to reveal the fired in-game round (in the renders in the first post). Needs a lot more work but I figured I would post an update. I may take a break from the hydra after the chamber to finish up the SMG. SHELL12_zps3ce2253a.jpe
     

    Attached Files:

    GeneralMayhem likes this.
  5. Mflanny34

    Mflanny34 Member

  6. Mflanny34

    Mflanny34 Member

    M7 SMG is completed! Printing and casting will begin soon!
    -Retractable locking stock
    -Folding fore grip
    -Functional sling mounts
    -Real size round
    -Clip is removable
    -Trigger, and other buttons are functional
    -Both charging handles/bolts are synchronized and spring loaded
    -Red dot will have engraved reticle, sight folds
    -Red dot is removable for iron sights
    -Rails are functional & removable
    SMG1_edited-1_zps163c9d7c.jpg
    SMG3_edited-1_zpse5ed10d9.jpg
    SMG9_edited-1_zps8eb4d681.jpg
    SMG11_edited-1_zps2d7cf877.jpg
    SMG5_edited-1_zps80951d57.jpg

    SMG1_edited-1_zps163c9d7c.jpg

    SMG3_edited-1_zpse5ed10d9.jpg

    SMG9_edited-1_zps8eb4d681.jpg

    SMG11_edited-1_zps2d7cf877.jpg

    SMG5_edited-1_zps80951d57.jpg
     
    GeneralMayhem and DUMDUMBOT like this.
  7. CasualCosplayer

    CasualCosplayer

    wow... words can´t describe how awesome your work is! *__*


    Pat-
     
  8. WMHunterTLS

    WMHunterTLS Member

    What program you using to model? They look great!
     
  9. TheOneWithNoName

    TheOneWithNoName

    If I promised my life away that I wouldn't redistribute your files would you share them? I have almost unlimited access to several 3d printers and no money for buying your prints.
     
  10. Mflanny34

    Mflanny34 Member

    Update on the upcoming sniper rifle!
    I will say it again however, no 3D models will be released. The models are being printed by one person, and that person only. Casts will be sold to the public, and that is all.

    EDIT: As of right now the SMG is being printed, also finishing up the molds of the last few AR parts.
    DDDDDDDDDD_zpsec2c7a94.jpg
    dfgh_zpsf97d627c.jpg
    sadfghgf_edited-1-Copy_zps8305529c.jpg
     

    Attached Files:

  11. DoctorCardwell

    DoctorCardwell

    wowowow these are absolutely magnificent! I'm not sure I would give out the files either, with that skill money is to be made! :popcorn
     
  12. rundown

    rundown 405th Regiment Officer

    nice subd models ;)
     
  13. Mflanny34

    Mflanny34 Member

    Here is a little bit of an update on the sniper, the bipod will be spring loaded and locking in several positions.
    defggfd_edited-1_zps25a55ee2.jpg
     

    Attached Files:

  14. Termhn

    Termhn 405th Regiment Officer

    Seems to be coming along well but you may want to have a light background for renders with that weapon, hard to see it.. unless that's what you were going for :)
     
  15. Bobbie117

    Bobbie117 New Member

    I'm not 100% sure I'm supposed to be posting comments because I am so knew to the 405th, but those look INCREDIBLE!! If you do have casts and what not for sale later on down the line, I will certainly be purchasing the SMG. Keep up the great work!!!

    Bobbie 1-17
     
  16. Mflanny34

    Mflanny34 Member

    Thanks guys! I do try to hide the details away in the dark until its 100%. Foregrip & sling mounts completed....
    ghhhhgg6776hh_zps2544a151.jpe
     

    Attached Files:

  17. Lightning13

    Lightning13 New Member

  18. Mflanny34

    Mflanny34 Member

    Yep, just a few reference pics from the game
     
  19. Mflanny34

    Mflanny34 Member

    Halo 5 Sniper is DONE

    Casts will be available in the future.
    -Working Bolt
    -Working Trigger
    -Functional locking bipod
    -Removable mag w/ real size rounds
    -Space for electronics in scope
    -Many other additional functions
    1124152_zpsurxivnjd.png
    ghhhjjj_zps3jqhv5zm.png
    112233ddfffgg_zpsjdygjeqn.png
    sadfghgf_edited-1_zpsvtzetsa8.jpg
    dfgh_zpsisnoqked.jpg
    SNIPERROUND1_edited-1_zps3ornkjtk.jpg
    SNIPERROUND2_edited-1_zpsbxo09mnv.jpg
    SNIPERROUND3_edited-1_zpse8c26lzy.jpg
     

    Attached Files:

    DUMDUMBOT, vshore100 and rainbow dash like this.
  20. Mflanny34

    Mflanny34 Member

    Here's an update on the progress of the Halo 5 MA5D. Lots of changes coming. gghhfgtt_zpsiyv12o8o.png
     

    Attached Files:

  21. Noble 10

    Noble 10

    wow man
     
  22. Mflanny34

    Mflanny34 Member

    Quick update, I'm starting on the M6HS now. I also did a quick traitor bullet and render. Looks pretty cool in my opinion.
    WSDFGG_zpsq9rpjbjs.png
    1233443_zpsd4gmqf92.png
    hh_zpsm1gvwv3y.png
     

    Attached Files:

  23. Mflanny34

    Mflanny34 Member

    Another small update, I made the 12.7 x 40 round a hollow point like in game, and updated it a bit. The M6H2 now has a functional spring loaded mag release, and I utilized the pin to connect the grip to the trigger guard.
    889_zpsn4bmh4m8.jpg
    778_zps7ktdzwpn.jpg
    112246_zpsvtcsj0ev.jpg
    667_zpspz0ikzyx.jpg
    668_zpsdaauh2lm.jpg
    669_zpsrfmjhoyr.jpg
     

    Attached Files:

    DUMDUMBOT likes this.
  24. Mflanny34

    Mflanny34 Member

    M6H2 Complete
    ggh664_zps4cyaii6h.png
    44655_zpstinnlmwt.png
    -Working trigger
    -Fire select
    -Mag release
    -Cocking slide with moving hammer
    -Room for laser sight internals
    -Functional pins
     

    Attached Files:

    DUMDUMBOT and vshore100 like this.
  25. Mflanny34

    Mflanny34 Member

    Halo 5 BR sight completed, need to do some better renders but these will do for now. \
    jjjjhfasdfghjhfdf_zps44wv0iik.png
    dddsssdf_zpsbfgglkvb.png
    ffddffd_zpsex7qzcbt.png
     

    Attached Files:

    DUMDUMBOT and vshore100 like this.

Share This Page