Halo Infinite GEN III Master Chief MK VI/ VII

Status
Not open for further replies.
Finished modeling the torso! Will print this within the next few weeks when my printer isn’t being a pain in the ass .
77E8D23F-D66A-4251-8C7D-3630965E6D5A.png
3C13173A-5FC5-4BC6-85F5-80A0F79060EE.png62958061-0A80-46F2-B332-3F5FA4CBA151.png

Modeled in some magnet slots! I think they could have been done better but had to rush this part. The weird shapes inside the chest are supports in case you are wondering.
4BB71A85-B133-4BB7-BCDD-26242988110B.jpeg




D0D9F529-3037-4537-B50B-F4B6070E0209.jpeg



I remodeled and updated the shins. My previous one was slightly redesigned to be blockier and wider but it turned out to be thinner than I expected. So I widened the rectangular base, remodeled the front portion of the shin to be more game accurate since it looked better imo, and the calf part was remodeled to be more angular as well.
0499E535-10AD-4771-AADC-478482DDCCEB.jpeg


I’ll be sharing an assembly of all the modeled pieces soon along with the helmet!
 
Back again with another update! At this point all I’m lacking are the final sections of the back and the new helmet model to be printed. The suit looks very physically imposing and will probably have to spend a lot of time get the padding right. With that being said, here are some nice photos I took the other day.
16B75D53-5B4F-44CE-B6BC-CCD39B63FFD3.jpeg
BFF18BFA-63D7-41AD-BA31-2CCA30B10F33.jpeg
3F3E939A-4126-4661-BA58-1EEADD5A112D.jpeg
C2F56FFA-6D3F-4AA8-9031-B84774C11E8F.jpeg
9E59874D-2CEB-4D83-9500-0A9102FD2BEA.jpeg



Here’s a quick demo of the magnetic link setup. I used 10x10 mm neodymium magnets, a total of 12 magnets for each shoulder and they’re VERY powerful.
 
Project 000: MARK VII, my first 3D modeled suit is complete! If any of you are interested you can shoot me a DM in Instagram @the_makyr to purchase the files.

Took a lot of time to finish this build since I started modeling this back in January. I mainly used the jazwares figure and some sketches I made as references, overall I’m very proud of the final product!

Credits to MosquitoBandito for helping me out with prototyping and providing reference pictures.




5E32983D-532F-48C0-B1B2-DDF5EA74EC05.jpeg
2218F59D-C87E-4CFF-B457-3D4D1131EA8D.jpeg
5D691D07-259B-47BD-A85D-C3CEBF44DB77.jpeg
65B4B242-14BF-479F-8E54-471CA771B8B8.pngB3980F05-1ED9-45B0-AA86-668D33AB8E5F.png056F613B-2D92-4345-8E50-B4323AC9783D.png31C25A5C-0170-4E19-8E52-5BE83232D767.jpegD99F37D0-7274-465E-8025-58C347024863.png0BC54D47-62B6-4A3F-8CC3-E7947F348FDF.png
 
Para mi segundo proyecto. Haré el traje Mark VII de Halo Infinite. Realmente me encanta el aspecto de esto y definitivamente será el diseño de traje más cómodo por su apariencia.

¡Hasta ahora estoy haciendo un buen progreso en las piernas y acabo de imprimir el casco mk vii de moe! No dude en comentar, este es el segundo traje que he modelado en 3D, por lo que cualquier opinión sobre cómo mejorarlo sería de gran ayuda.

Hola amigo me pregunto como haces el visor, soy nuevo en este mundo y busco aprender,
gracias!
 
Hello again everyone and happy new year! I sometimes seem to forget I have a thread here haha. As promised here are pictures of my first full suit up for the Halo Infinite Master Chief armor. Enjoy GEN III in all its glory!

“The Beast of Possibility”


74279C65-0973-4782-956C-11484E00FB43.jpeg
CA81726E-C74B-41A5-BDAA-1A0853ABB16C.jpeg
5E660E00-6401-438B-B3E5-5F487104425A.jpeg
B07664F9-3B3B-400A-934B-968EE41E2942.jpeg
DD699F43-57D0-474A-942C-5ED87A1801B9.jpeg
722B5C41-7892-4717-8B4A-ADFE38D7015B.jpeg
2CB12DD9-CDE6-4F3B-B1F2-0EE10193D9B7.jpeg


Suit is now in sanding/ priming stage. Soon it’ll be painted and will be completed with a custom undersuit to hold everything in place. Hopefully all goes as planned
 

Attachments

  • 0C431915-8D35-4E7D-B237-281F684275D2.jpeg
    0C431915-8D35-4E7D-B237-281F684275D2.jpeg
    1.8 MB · Views: 110
Status
Not open for further replies.
Back
Top