Halo Reach - Noble 3 - Jun-A266 - Mark 5 armor set including Helmet
This is an armor set remixed from a Pepakura armor files uploaded on the 405th.com forum. I didn't have one source for the pdo files so I will just link to the 3 posts where I got most of the files that I then turned into Noble 3.
The files I made printable are:
1)Halo: Reach - MJOLNIR Mark V - Scout
2)Halo: Reach - MJOLNIR Mark V - Accessories
3)Halo: Reach - MJOLNIR Mark V - Accessories
A few things to note:
1) It is currently scaled to 5'10" 185lb person.
2) You can use the Sniper Rifle from here to be a good match: Halo Reach Sniper Rifle by Jace1969
3) If you are doing this full Print, be sure to print 3 sets of bullets for the shoulder and 4 clips for the Left Thigh Soft pouch add on.
4) I left holes in the left thigh so that you can attach either (https://www.amazon.com/gp/product/B01ND1HH3K/ref=ox_sc_act_title_1?smid=A1UT1JTKJ7CWFD&psc=1) tactical pouch or one of these (https://www.amazon.com/gp/product/B06XCKYRKZ/ref=ox_sc_act_title_2?smid=A3UPZYCA2EP4GJ&psc=1). It'll look nice and be functional as well.
5) for the lower back pouch, I would use this (https://www.amazon.com/FAMI-Military-Tactical-Backpack-Multifunction/dp/B00ZHNA1RM/ref=sr_1_84?keywords=tactical+pouch&qid=1551884594&s=gateway&sr=8-84&th=1).
The reason for uploading the armor set like this is that it gives the end-user a chance to resize the armor to their body and split it up to their 3D print bed.
This is an armor set remixed from a Pepakura armor files uploaded on the 405th.com forum. I didn't have one source for the pdo files so I will just link to the 3 posts where I got most of the files that I then turned into Noble 3.
The files I made printable are:
1)Halo: Reach - MJOLNIR Mark V - Scout
2)Halo: Reach - MJOLNIR Mark V - Accessories
3)Halo: Reach - MJOLNIR Mark V - Accessories
A few things to note:
1) It is currently scaled to 5'10" 185lb person.
2) You can use the Sniper Rifle from here to be a good match: Halo Reach Sniper Rifle by Jace1969
3) If you are doing this full Print, be sure to print 3 sets of bullets for the shoulder and 4 clips for the Left Thigh Soft pouch add on.
4) I left holes in the left thigh so that you can attach either (https://www.amazon.com/gp/product/B01ND1HH3K/ref=ox_sc_act_title_1?smid=A1UT1JTKJ7CWFD&psc=1) tactical pouch or one of these (https://www.amazon.com/gp/product/B06XCKYRKZ/ref=ox_sc_act_title_2?smid=A3UPZYCA2EP4GJ&psc=1). It'll look nice and be functional as well.
5) for the lower back pouch, I would use this (https://www.amazon.com/FAMI-Military-Tactical-Backpack-Multifunction/dp/B00ZHNA1RM/ref=sr_1_84?keywords=tactical+pouch&qid=1551884594&s=gateway&sr=8-84&th=1).
The reason for uploading the armor set like this is that it gives the end-user a chance to resize the armor to their body and split it up to their 3D print bed.
