XxCALIBERxX
Member
Okay, so now that i have done a decent amount of work on it i feel obligated to poast this and get some feedback from the community. So i started maybe a week ago, just getting the rough shapes then detailing and eventually i'll be fine tuning everything. So Here we go.
This is the handle and trigger housing (?), Needs more detailing and the sort of griptexture needs to be working into the handle somehow.
This is the butt/stock. Needs to be sanded and finished up detaling. Plus i might need to fill some of the gaps with Body filler. Don't know yet.
This is the Same thing with the top part attached... Still needs to be fine tuned.
This is the loading spot. Where the shotgun shells are loaded, This flap depresses, and will eventuallly be sprung.
The end of the barrel, you can't really see the detailing, but you can in the video. Have a look if you want. This still needs to be sanded pretty heavily.
This is the gun railing and the sights, used above the barrel. I think it looks pretty decent.
The 'pump' Which is not yet detailed, just sanding it down at the moment and figure out its shape.
This piece sits where the 'pump' lides along, so you can see a slot where the pump will be able to slot in and properly pump. Eventually there will be a spring as well.
And as promised a video.
That video should explain everything else. Skip to 2.30 if you want to see just the gun. (you might be interested in the plaster cast head though. I don't know.
.
Okay guys, tell me what you guys think and give me some pointers..
Thank you very much.
Cheers, Dave.
This is the handle and trigger housing (?), Needs more detailing and the sort of griptexture needs to be working into the handle somehow.
This is the butt/stock. Needs to be sanded and finished up detaling. Plus i might need to fill some of the gaps with Body filler. Don't know yet.
This is the Same thing with the top part attached... Still needs to be fine tuned.
This is the loading spot. Where the shotgun shells are loaded, This flap depresses, and will eventuallly be sprung.
The end of the barrel, you can't really see the detailing, but you can in the video. Have a look if you want. This still needs to be sanded pretty heavily.
This is the gun railing and the sights, used above the barrel. I think it looks pretty decent.
The 'pump' Which is not yet detailed, just sanding it down at the moment and figure out its shape.
This piece sits where the 'pump' lides along, so you can see a slot where the pump will be able to slot in and properly pump. Eventually there will be a spring as well.
And as promised a video.
That video should explain everything else. Skip to 2.30 if you want to see just the gun. (you might be interested in the plaster cast head though. I don't know.
.Okay guys, tell me what you guys think and give me some pointers.
.Thank you very much.
Cheers, Dave.
Attachments
Last edited by a moderator:
