I odnt know how i can get the 3D look?

Admiral87

New Member
the parts of my Forearm dont fit rigth and i dont realy know why but now i have alle the parts and if i glue them together it dose not look very good because i would be one monotone pice and i dont know how to fix this so can somone help me?
 

Attachments

  • MKIV_ForearmLeft_by_Jerverant - Pepakura Designer 5 10.11.2024 20_25_01.png
    MKIV_ForearmLeft_by_Jerverant - Pepakura Designer 5 10.11.2024 20_25_01.png
    98.8 KB · Views: 31
Hello there! We would love to help you with your problem, can you please be more in-depth about your issue like; what material are you using, are you beveling, using a heat gun, etc.
Thank you.
 
Upvote 0
the parts of my Forearm dont fit rigth and i dont realy know why but now i have alle the parts and if i glue them together it dose not look very good because i would be one monotone pice and i dont know how to fix this so can somone help me?
The display should rotate if you click and move on it, the prom is naturally generating a 3d image. Some pieces need to be mirrored when tracing pieces which is why there’s only one of some pieces
 
Upvote 0
Hello there! We would love to help you with your problem, can you please be more in-depth about your issue like; what material are you using, are you beveling, using a heat gun, etc.
Thank you.
oh sorry, i am jusing Foam I wanted to glue the parts together but I saw that the parts didn't fit together. Then I saw that the parts all had such a distance that gave this multi-layered effect, but I couldn't find any parts in the file that had the normal parts with this So the problem is that I don't understand how I'm supposed to glue the parts together because somehow the intermediate parts are missing or so that the arm protection is multi-layered like you see in the picture (I hope you understand it can I had to translate it)
 
Upvote 0
i usually make the parts out of paper first and tape them together using masking tape, then i can use different combined pieces as 1 larger foam piece. You also have to know how to make the angles fit together. I also used contact glue as this works best. Alot of foam building you have to learn on the go and sort of make some educated guesses with it when building.
 
Upvote 0

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top