Kamen Rider compound eyes help


Tokusatsu200

New Member
I need some help with making Kamen Rider compound eyes, and I already looked up vacuum forming. Is there an easier and cheaper way to make them?
 

marinesniper

Active Member
if you have a hobby store close like hobby lobby, they have different size clear ball shaped things you might be able to use them just cut them to the size you need the eyes to stick out.. hope that helps
 

marinesniper

Active Member
here is the link to it also but here is a picture of the ones im talking about they have them in different sizes

 

Attachments

  • 207654-0220-px.jpg
    207654-0220-px.jpg
    53.9 KB · Views: 34

marinesniper

Active Member
easy enough you get the round plastic balls and cut them in half then you get the sticker decal that has that pattern and put it on the out side and then spray it red and then peel off the stickers like the master chief visor i will send you a link to how he did the visor. then die the plastic ball red.

you go to around 3:10 and watch from there to see how he put the same design on his visor. it should help you out, cutting the ball in half is not hard a hack saw will do it but be careful not tocut your self even better if you have a dremel with a cutting wheel go that route...
 

Tokusatsu200

New Member
easy enough you get the round plastic balls and cut them in half then you get the sticker decal that has that pattern and put it on the out side and then spray it red and then peel off the stickers like the master chief visor i will send you a link to how he did the visor. then die the plastic ball red.

you go to around 3:10 and watch from there to see how he put the same design on his visor. it should help you out, cutting the ball in half is not hard a hack saw will do it but be careful not tocut your self even better if you have a dremel with a cutting wheel go that route...
Where did he get those stickers, and what type of paint did he use?
 

marinesniper

Active Member
that would work for what you are wanting to do and the auto stickers if you use them put the inside the half a ball and then do your painting like in the video it might just work for what you want...
 

marinesniper

Active Member
here is a link to the stickers he used in his video

 
This thread is more than 8 months old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top