Foam Master chief infinite build


Waltimusprime

New Member
Haven’t posted much over the years so I figured I’d do better and start being active on here to network with my fellow builders more. I got heroes workshop (stefano/stealth) templates and I’ve used a couple of moesizzlac files and the helmet was originally a sonner file but I sculpted over it with epoxy to change a lot. Here’s what I have so far. Chest is all foam
 

Attachments

  • 26446C80-F5A1-45B5-AAA6-296639AF22EE.jpeg
    26446C80-F5A1-45B5-AAA6-296639AF22EE.jpeg
    1.3 MB · Views: 65
  • 9DC973B2-265C-4F72-B3B5-3B8F7305DB2B.jpeg
    9DC973B2-265C-4F72-B3B5-3B8F7305DB2B.jpeg
    1.4 MB · Views: 68
  • B10AFB4C-8105-4FD0-8DB9-81F90571FE68.jpeg
    B10AFB4C-8105-4FD0-8DB9-81F90571FE68.jpeg
    1.4 MB · Views: 60
  • 194E054F-CD93-4348-9AB4-8DA928672D98.jpeg
    194E054F-CD93-4348-9AB4-8DA928672D98.jpeg
    1.7 MB · Views: 73

MrJamin

RXO
405th Regiment Officer
I saw that neck seal thanks to RandomRanger on Etsy. It is super tempting to pick one up. Just need to figure out if I could make it work for a 16" neck vs. the 18" you said.
 

RandomRanger

Armory Assistant
Community Staff
Member DIN
S063
This build looks great!
I already ordered one of your neck seals, but I'm curious, is latex casting a reasonable thing to get into, or is it expensive and difficult?
 

Waltimusprime

New Member
This build looks great!
I already ordered one of your neck seals, but I'm curious, is latex casting a reasonable thing to get into, or is it expensive and difficult?
latex is very affordable. and easy to work with, messy as all hell but pretty easy. the molds typically have to be in something porous like stone so that can get tricky and heavy.
 

Waltimusprime

New Member
I saw that neck seal thanks to RandomRanger on Etsy. It is super tempting to pick one up. Just need to figure out if I could make it work for a 16" neck vs. the 18" you said.
so its very easy to cut up. like a fabric. i made it fit a 15 inch neck today but i basically had to cut out the entire back section. so i cut like 3-4 inches out and then just use adhesive velcro in the backs of each side then the opposing side to connect them. you could also sew some stretch fabric to it. It still looks fine without the back section and honestly no one ever really sees that part and half of it is up in the helmet anyway.
 

sax092

Jr Member
what part fill you tackle next, by the way I love the neck sleeve. how did you coluor it? was it already black or what?
 

MrJamin

RXO
405th Regiment Officer
what part fill you tackle next, by the way I love the neck sleeve. how did you coluor it? was it already black or what?
It is made with Black latex

 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top