Project Hyper V2 WIP and Bi-Weekly Update

Status
Not open for further replies.

ItSpartan116

Member
This is my second version of my fully 3D printed MK6 Spartan Armor from Halo 3. The first version was a failure do to Covid-19 so I am remaking and updating design on the second version. I am going to do bi-weekly update.
 

Attachments

  • 24D0A2CC-ACBA-4943-AC29-A00FC5A13B30.jpeg
    24D0A2CC-ACBA-4943-AC29-A00FC5A13B30.jpeg
    69.5 KB · Views: 142
Update 1 (Oct. 20, 2021
I finished 3D printing the Helmet and both Hand-plate.

The Helmet is more detail than the original version and almost ready for paint

The Hand-plate are bigger in size so it cover my hand more than the 1st Version and also alms ready to be painted

I am going to be getting 4 more spool of pla so I can start printing the bicep and forearm piece of the armor
 

Attachments

  • AECD6CC3-307A-4F8D-92F5-DFB8896A31F1.jpeg
    AECD6CC3-307A-4F8D-92F5-DFB8896A31F1.jpeg
    455.9 KB · Views: 120
  • A5183B09-CD8F-4A77-9441-B59448946804.jpeg
    A5183B09-CD8F-4A77-9441-B59448946804.jpeg
    381 KB · Views: 123
  • D43F98AD-6E21-44BC-A7A6-327CFF497891.jpeg
    D43F98AD-6E21-44BC-A7A6-327CFF497891.jpeg
    355.9 KB · Views: 140
  • 428C43B3-9B8E-4576-98F6-E137E118854B.jpeg
    428C43B3-9B8E-4576-98F6-E137E118854B.jpeg
    331.7 KB · Views: 131
  • F85B3077-8AB6-415A-8381-82E2A20EEC54.jpeg
    F85B3077-8AB6-415A-8381-82E2A20EEC54.jpeg
    139.1 KB · Views: 123
Update 2 (Oct. 28, 2021)

So while I wait to get more PLA Filaments I decided to finished off my helmet and Handplate and paint them.

When you look at the helmet you will notice that I didn’t completely finished smooth down and fix any issues with the helmet because I want to have damaged look and a messy look, so the helmet with natural dent and crack line is smear paint is a way to bring a realistic damage and messy look. I also 3d print the tube that I will be installed in the front of the helmet and that will complete the body of helmet then I just need to installed a visor. Plus the stripe in the middle is accurate to Halo 3 paint layout. Color scheme is Fire Red - Steel - Black

The Handplate is just painted red and black detail.

The next thing up to print will be the forearm then the bicep
 

Attachments

  • 76D9A6CE-B825-421F-81F8-9FF50F6E67A7.jpeg
    76D9A6CE-B825-421F-81F8-9FF50F6E67A7.jpeg
    546.4 KB · Views: 127
  • 442D5868-A178-44B0-83CE-ED2CB19CE948.jpeg
    442D5868-A178-44B0-83CE-ED2CB19CE948.jpeg
    479.6 KB · Views: 136
  • 46AC89F0-393C-4D13-829F-E3BFE7421970.jpeg
    46AC89F0-393C-4D13-829F-E3BFE7421970.jpeg
    417.4 KB · Views: 130
  • 853A42EF-899E-4E1F-B96A-3F620EAC71FB.jpeg
    853A42EF-899E-4E1F-B96A-3F620EAC71FB.jpeg
    401.3 KB · Views: 126
Update 3 (Nov. 9, 2021)

So I got more PLA Filament and I been printing the left biceps. I had make some readjustment to the bicep so it will work in ArmorSmith program. (It was only a layout scale) So I got my Bicep and Forearm size on ArmorSmith.

I started printing the Left biceps armor but it fail when I did the armor in one piece so I had to slice the bicep into 4 pieces. The left biceps should be done printing by this Friday and I will start the R Bicep Saturday or Sunday.

Also, last week I printed some tube vent to installed into the slot and it look a lot better I am going to 3d print a Visor and then make a mold for it so I can vacuum form the visor so I can have a real visor from halo 3 and not a motorcycle visor.
 

Attachments

  • 5F222F3C-C3AB-45B7-9D27-E62E4F9B7BA2.jpeg
    5F222F3C-C3AB-45B7-9D27-E62E4F9B7BA2.jpeg
    315.1 KB · Views: 109
  • DC98B6E9-5CC0-46E3-9152-EE8E35AF1228.jpeg
    DC98B6E9-5CC0-46E3-9152-EE8E35AF1228.jpeg
    358.6 KB · Views: 119
Update 4 (Nov. 22, 2021)
I got the right bicep 3D printed and I got the pieces weld together so very sturdy but my 3D printer is now out of order until I get the part to fix it. Hopefully I will have it fix before Christmas. Fingers crossed

Also the due date is a week of Fan Expo Dallas which is June 17, 2022
 

Attachments

  • 94E9562B-8FBB-41A7-A09B-3C74BE0DB360.jpeg
    94E9562B-8FBB-41A7-A09B-3C74BE0DB360.jpeg
    319.2 KB · Views: 119
  • 352CFAE7-58CF-4AB9-9DD0-5E4E7C01A491.jpeg
    352CFAE7-58CF-4AB9-9DD0-5E4E7C01A491.jpeg
    319.2 KB · Views: 111
  • E6AD2349-7A8A-42B0-A7E7-793CE0E50A9B.jpeg
    E6AD2349-7A8A-42B0-A7E7-793CE0E50A9B.jpeg
    296.4 KB · Views: 116
Update 5 (Dec. 27, 2021)
Sorry, it has been over a month since I updated due to the holiday season and my 3d printer and work want to cause problems I have found myself in a delay that I am just trying to keep up with my due date. Also, I have made a better version of my helmet and it should be done by the end of January with the biceps and forearm. This is also the look I am going for “not the soft part but the armor.”
 

Attachments

  • 3AEC00DA-5FC4-4F69-93B3-54129EFA5F2D.jpeg
    3AEC00DA-5FC4-4F69-93B3-54129EFA5F2D.jpeg
    383.6 KB · Views: 105
  • FFF735B0-0F68-4A7E-A455-E4FEF81E788B.jpeg
    FFF735B0-0F68-4A7E-A455-E4FEF81E788B.jpeg
    186.3 KB · Views: 99
HAPPY NEW YEAR EVERYONE!!!!!
Update 6 (Jan. 1, 2022)
I almost got my second improved helmet finished and it fit well and I got both bicep finish and working on my forearm right now.
 

Attachments

  • B1889A1E-A5FD-49C7-9045-8F5AC2DC4767.jpeg
    B1889A1E-A5FD-49C7-9045-8F5AC2DC4767.jpeg
    339.8 KB · Views: 100
  • D80C88AA-8E28-4A2B-A9F1-16E412D81391.jpeg
    D80C88AA-8E28-4A2B-A9F1-16E412D81391.jpeg
    331.8 KB · Views: 102
  • DD017AD3-673E-4FE4-BE1D-0686C8E1A060.jpeg
    DD017AD3-673E-4FE4-BE1D-0686C8E1A060.jpeg
    339.3 KB · Views: 97
  • 4E8646C1-FED2-4477-95D7-69F6D4ED99B3.jpeg
    4E8646C1-FED2-4477-95D7-69F6D4ED99B3.jpeg
    327.7 KB · Views: 103
  • E8034083-FDD4-4066-AB07-7CF455401703.jpeg
    E8034083-FDD4-4066-AB07-7CF455401703.jpeg
    1.1 MB · Views: 103
  • D3768A79-8CDE-432D-9979-CBC7FC891C6B.jpeg
    D3768A79-8CDE-432D-9979-CBC7FC891C6B.jpeg
    335.7 KB · Views: 99
  • DAA2E816-F572-4A2E-BBDA-F4E3654A2B15.jpeg
    DAA2E816-F572-4A2E-BBDA-F4E3654A2B15.jpeg
    315.1 KB · Views: 99
  • DBC788A2-4A3B-49B3-BF8C-6F4952E2224B.jpeg
    DBC788A2-4A3B-49B3-BF8C-6F4952E2224B.jpeg
    1.4 MB · Views: 103
Update 7 (Jan. 2, 2022)

Quick update on the helmet. It is done and I think it look great I did the weathering process that looks more halo infinite than halo 3 look. I am currently 3D printing my forearm pieces and after my arm will be done and it will be time to move to the chest
 

Attachments

  • 787644A9-CF2D-44E8-8E8C-FA501F800EF8.jpeg
    787644A9-CF2D-44E8-8E8C-FA501F800EF8.jpeg
    389.7 KB · Views: 98
  • 1D39B32A-D8F5-4D5E-8329-8200EBE78391.jpeg
    1D39B32A-D8F5-4D5E-8329-8200EBE78391.jpeg
    374.4 KB · Views: 96
  • 1ACF3A54-4304-49DA-B3AC-26EF0DB6397F.jpeg
    1ACF3A54-4304-49DA-B3AC-26EF0DB6397F.jpeg
    312.1 KB · Views: 97
Status
Not open for further replies.
Back
Top