Starting back again after 5 years, working on a 3D printed assault rifle with moving parts


BabyLegs

New Member
So I got the file off of thingiverse by oddworks, it was listed as a ma5b but looks like the ma5d if I remember correctly, anyways I’ve made a good bit of progress before this post so far. As of right now I need to get more material to continue, wait times are longer due to the virus so here’s what I have so far.

First image is the 7.62 ammunition, compared to an actual bullet, and second is the assorted parts so far, just being held together by friction. I will go into more detail about the moving parts when I get home
 

Attachments

  • A09E8E92-B7FA-492B-8244-95B2C6BB450A.jpeg
    A09E8E92-B7FA-492B-8244-95B2C6BB450A.jpeg
    848.5 KB · Views: 129
  • 069C87F4-143C-4BBB-B9DD-74C0E30E1CC0.jpeg
    069C87F4-143C-4BBB-B9DD-74C0E30E1CC0.jpeg
    1.7 MB · Views: 129

BabyLegs

New Member
Hey guys, I’m lazy when it comes to work in progress updates, but I felt motivated after seeing how far into my build I am! All of it is printed, just got a ton of post processing and then finally paint once my airbrush is in. One is it just a test fit assembly, the other is where I’m at now.
 

Attachments

  • 96B8AF4E-47F9-42BF-B768-BF0CE7E66BCC.jpeg
    96B8AF4E-47F9-42BF-B768-BF0CE7E66BCC.jpeg
    725.3 KB · Views: 82
  • C132A668-E8B7-4E63-9285-E005A3E067FA.jpeg
    C132A668-E8B7-4E63-9285-E005A3E067FA.jpeg
    1.1 MB · Views: 82
  • 8AF595E1-738D-4A77-8078-E4F3D3FEC6E7.jpeg
    8AF595E1-738D-4A77-8078-E4F3D3FEC6E7.jpeg
    1 MB · Views: 83

BabyLegs

New Member
Well guys, it’s all done, complete with a operating charging handle, mag release, and ammo counter that does count down
 

Attachments

  • 78E5FCD7-1EFC-496B-A3C9-96428DB7E993.jpeg
    78E5FCD7-1EFC-496B-A3C9-96428DB7E993.jpeg
    1.7 MB · Views: 58
  • 56EC0FB4-1036-4AF7-A002-F37FD6144735.jpeg
    56EC0FB4-1036-4AF7-A002-F37FD6144735.jpeg
    2 MB · Views: 50
  • 6B1AC3D8-1403-4991-A7C8-8628445F4B22.jpeg
    6B1AC3D8-1403-4991-A7C8-8628445F4B22.jpeg
    1.8 MB · Views: 50
  • 66C8359D-0D68-401E-BC18-DF4BAAFE657C.jpeg
    66C8359D-0D68-401E-BC18-DF4BAAFE657C.jpeg
    2.1 MB · Views: 52
  • 9D95C586-CCED-4CDB-8D61-A0C80A9C3743.jpeg
    9D95C586-CCED-4CDB-8D61-A0C80A9C3743.jpeg
    2.5 MB · Views: 50

BabyLegs

New Member
Oh God it's georgeous. Extremely impressive work, brother. Will you be selling these maybe?
Thank you! Unfortunately I discovered that the 3D file is posted that I cannot make commercial use of it, at the most I could sell off my personal piece, but can’t produce to sell
 
This thread is more than 9 months old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top