New profile posts

What's new New posts New media New media comments New resources New profile posts Latest activity
KwissDaddy
Left bicep and plate have been successfully clearcoated and bonded together. Everything went as planned thankfully. I left the inside of the bicep unpainted mostly so that I can bond the padding directly to the plastic instead of the paint. It will create a stronger bond in the long run.

Attachments

  • 20260304_234831.jpg
    20260304_234831.jpg
    2.4 MB · Views: 4
  • 20260304_234900.jpg
    20260304_234900.jpg
    3.7 MB · Views: 5
  • 20260304_234850.jpg
    20260304_234850.jpg
    4 MB · Views: 4
  • 20260304_234840.jpg
    20260304_234840.jpg
    3.8 MB · Views: 3
KwissDaddy
Jorge Build: Update #12. Left bicep paint complete. Now to clearcoat both the left shoulder plate and bicep then bond them together. I'm excited to say the least

Attachments

  • 20260303_104321.jpg
    20260303_104321.jpg
    1.8 MB · Views: 8
  • 20260303_104337.jpg
    20260303_104337.jpg
    1.8 MB · Views: 8
  • 20260303_104348.jpg
    20260303_104348.jpg
    3.1 MB · Views: 8
KwissDaddy
Scuff Marks added to shoulder plate.

Attachments

  • 20260301_191242.jpg
    20260301_191242.jpg
    4 MB · Views: 19
  • 20260301_193155.jpg
    20260301_193155.jpg
    4.2 MB · Views: 15
KwissDaddy
Some detail work and shading added to the shoulder plate. Still need scuff marks and clear coat.

Attachments

  • 20260301_164956.jpg
    20260301_164956.jpg
    3.6 MB · Views: 13
  • 20260301_165019.jpg
    20260301_165019.jpg
    3.9 MB · Views: 12
KwissDaddy
Red has been added. Gotta wait another 24-36 hours before white paint application.

Attachments

  • 20260227_114856.jpg
    20260227_114856.jpg
    4.1 MB · Views: 18
  • 20260227_114906.jpg
    20260227_114906.jpg
    4.2 MB · Views: 17
  • 20260227_115554.jpg
    20260227_115554.jpg
    1.4 MB · Views: 17
KwissDaddy
Both the left bicep and shoulder plate have been painted green. Still have more sanding to do on the bicep piece before final coat but it's getting there. Shoulder plate just requires, red, white, detail work and clearcoat

Attachments

  • 20260226_115124.jpg
    20260226_115124.jpg
    1.4 MB · Views: 17
  • 20260225_235237.jpg
    20260225_235237.jpg
    3.6 MB · Views: 16
KwissDaddy
One more round of sanding then top coat for the left bicep. Left shoulder plate is still curing until Wednesday where it will be masked off then green, red, white, and titanium silver top coat will be applied over a period of 4 days allowing a day for each color to cure before the next layer is applied. All then followed by detail work, bonding the two pieces together, some more detail work, then clear coat.

Attachments

  • 20260224_120626.jpg
    20260224_120626.jpg
    1.4 MB · Views: 21
  • 20260224_120643.jpg
    20260224_120643.jpg
    1.6 MB · Views: 25
  • 20260224_121359.jpg
    20260224_121359.jpg
    2.1 MB · Views: 22
  • 20260224_121414.jpg
    20260224_121414.jpg
    2.2 MB · Views: 20
KwissDaddy
Making progress on the left bicep/shoulder. Slow but steady wins the race

Attachments

  • 20260220_141813.jpg
    20260220_141813.jpg
    3 MB · Views: 23
  • 20260222_120954.jpg
    20260222_120954.jpg
    1.3 MB · Views: 25
KwissDaddy
Helmet has been clear coated and the visor has been permanently installed

Attachments

  • 20260215_121027.jpg
    20260215_121027.jpg
    2.4 MB · Views: 35
  • 20260215_121741.jpg
    20260215_121741.jpg
    1.7 MB · Views: 33
  • 20260215_121800.jpg
    20260215_121800.jpg
    3.4 MB · Views: 39
KwissDaddy
Next step in the suit is Jorge's left shoulder plate. All bonded together, gap filled, sanded, and now filler primed. Now to fill in the remaining low spots and sand again.

Attachments

  • 20260210_203636.jpg
    20260210_203636.jpg
    1.7 MB · Views: 39
KwissDaddy
Helmet is back to needing just clear coat now.

Attachments

  • 20260207_205750.jpg
    20260207_205750.jpg
    2.1 MB · Views: 53
  • 20260207_205834.jpg
    20260207_205834.jpg
    2.1 MB · Views: 51
  • 20260207_205801.jpg
    20260207_205801.jpg
    2.1 MB · Views: 50
KwissDaddy
Current state of Jorge. I unfortunately had a major set back with the helmet paint job with the clear coat that I applied blushing out across the whole surface turning it almost entirely white. Moral of the story, don't chance painting in humidity. Had to sand the whole thing and restart.

Attachments

  • 20260131_111307.jpg
    20260131_111307.jpg
    1.4 MB · Views: 54
FangBoundHound
Getting ready to buy supplies. My plan is to use 5mm and 10mm EVA foam. I'm going to start with the Reach combat knife as a practice run so I can get used to working with EVA. Hoping to start the armor itself in mid to late March maybe early April
KwissDaddy
Working on Bringing Spartan 052, Jorge to life. Any help/suggestions are most welcome as this is my first cosplay ever and I'm going all in.
Back
Top