thehunter7
Member
Hey, thanks! I got it from the all in one pack under the mark 6 HD folder
Click here for the all in one pack
It has a bunch of great files!
1st Attempt at Halo Armor
- Thread starter thehunter7
- Start date
- Status
Hey, thanks! I got it from the all in one pack under the mark 6 HD folder
Click here for the all in one pack
It has a bunch of great files!
thehunter7
Member
Here is some pics of my forearm attachment
thehunter7
Member
Well guys, finished peping all my arms, fibre glasses one forearm, resined one shoulder, other forearm and one odst shoulder piece (but made one that's bigger and works better.
Started on the legs, and finished one shin, but it was huge, I'll post a picture of it so y'all can get a good laugh.
Might work for a megaman arm gun lol
Started on the legs, and finished one shin, but it was huge, I'll post a picture of it so y'all can get a good laugh.
Might work for a megaman arm gun lol
thehunter7
Member
Hey all here is an update! Got all arms resined and an extra forearm fibreglased. Both shins and one thigh (little small) resined as well.
Here are some pics
As you can see the other one is a little big lol
Big enough to be a thigh... Ha!
Hyabussa parts
Workstation
Here are some pics
As you can see the other one is a little big lol
Big enough to be a thigh... Ha!
Hyabussa parts
Workstation
thehunter7
Member
Well had a very productive weekend. Fibreglassed all the pieces (minus thigh which still needs to be resined).
So in all got these done:
Both shoulders
Left forearm
Both shins
Odst shoulder piece
Hyabussa shoulder piece
And the base of the forearm attachment
So in all got these done:
Both shoulders
Left forearm
Both shins
Odst shoulder piece
Hyabussa shoulder piece
And the base of the forearm attachment
thehunter7
Member
Yeah it's quite awesome!
thehunter7
Member
Well its been quite awhile since I posted. My progress had slowed due to last semester. But now I have been busy! I have fiberglassed the thigh pieces and cut a bit to fit better. And I have pepped one shoe and the cod piece. I will post pics soon. I had to mod the boot piece to go around the black boots I have. Took me awhile to get it to look good.
MikyVengeance
Well-Known Member
It's great that you're still dedicated to the armour! A lot of people loose hope but still working through breaks and stuff. Looks good man, I really want to see how this costume turns out : )
thehunter7
Member
Well just printed out my 60 pages of cardstock to pep for the HD mark VI chest piece! Im pumped!
thehunter7
Member
Progress update 6/17/2011
OK I said i would put some pictures up, and so here I am doing so... anyways. Ok! (also click for bigger pictures)
First off I have pepped the Mark VI HD Cod piece shown here:
Now here is the left boot straps Mark VI. I had to do a little improvising because the boot that Im using is to big for it to fit around so I jimmy rigged a piece to hold it together. Works pretty nicely. The first one on the right hand side I didnt put folds into so its a bit odd looking but got it down on the other side:
This is the jimmy rig piece... if you can tell!
And now Here is some progress on my Mark VI HD Chest piece... got 60 pages printed out, and have scored a little over 25 and have begun to pep it together. 39 pages are the actuall chest piece while the other 21 are supports. Its so many pages becuase well im a rather large guy and so had to up the scale a bit... had to do some trimming to the rest of my pieces to get it to fit right. Its quite fun!
The masterpiece... Thanks FlyingSquirrel for the pep file!
Mass of cardstock waiting to be cut folded and glued
Workstation
And my slow progress...
These pics are taken on my phone so they might not be best quality, but its fast and easy. Thanks for the support and taking a look everyone!
-hunter
OK I said i would put some pictures up, and so here I am doing so... anyways. Ok! (also click for bigger pictures)
First off I have pepped the Mark VI HD Cod piece shown here:
Now here is the left boot straps Mark VI. I had to do a little improvising because the boot that Im using is to big for it to fit around so I jimmy rigged a piece to hold it together. Works pretty nicely. The first one on the right hand side I didnt put folds into so its a bit odd looking but got it down on the other side:
This is the jimmy rig piece... if you can tell!
And now Here is some progress on my Mark VI HD Chest piece... got 60 pages printed out, and have scored a little over 25 and have begun to pep it together. 39 pages are the actuall chest piece while the other 21 are supports. Its so many pages becuase well im a rather large guy and so had to up the scale a bit... had to do some trimming to the rest of my pieces to get it to fit right. Its quite fun!
The masterpiece... Thanks FlyingSquirrel for the pep file!
Mass of cardstock waiting to be cut folded and glued
Workstation
And my slow progress...
These pics are taken on my phone so they might not be best quality, but its fast and easy. Thanks for the support and taking a look everyone!
-hunter
thehunter7
Member
Chest Pepped
Well I worked for like 3 days straight and finally for it finished!!!I need to still put in the support structures but most is done!
Here are some pics.
Today I also had my coomputer crash but luckily I was far enough to finish (except the support still need to look at it on the program) by figuring it's out via numbers.
Any who hope to get those on and do some fiberglassing
-hunter
Well I worked for like 3 days straight and finally for it finished!!!I need to still put in the support structures but most is done!
Here are some pics.
Today I also had my coomputer crash but luckily I was far enough to finish (except the support still need to look at it on the program) by figuring it's out via numbers.
Any who hope to get those on and do some fiberglassing
-hunter
thehunter7
Member
Well, I have finished the helmet! Here are some updated pics.
I hope to resin all my peped pieces today: cod, helm, chest, and one boot piece
I hope to resin all my peped pieces today: cod, helm, chest, and one boot piece
thehunter7
Member
9/18/11 update!
Ok well i havent posted in awhile, but I have been busy, so dont worry. Trying to make that Haloween deadline. It was foolish of me to think I could have made the one last year, but I got a whole month ahead of me. I have enterd into the Bondo/detaling phase right now. Its alot of work! I have finished... well almost finished my helmet and chest piece, a shoulder and forearm piece. But I figured I would add some pics so yall can see! I want to get my helmet done, but dont really have any paint right now... so oh well. I also solderd some led lights and a fan for the helm too!
(lovely leds... i want to install asap, so legit)
(fan for nice and cool breeze on me face)
(a mess of soldering equipment)
(switch for the lights on outside for easy on/off access)
(not to noticable, might trim the switch toggle down a bit more...)
Ok well i havent posted in awhile, but I have been busy, so dont worry. Trying to make that Haloween deadline. It was foolish of me to think I could have made the one last year, but I got a whole month ahead of me. I have enterd into the Bondo/detaling phase right now. Its alot of work! I have finished... well almost finished my helmet and chest piece, a shoulder and forearm piece. But I figured I would add some pics so yall can see! I want to get my helmet done, but dont really have any paint right now... so oh well. I also solderd some led lights and a fan for the helm too!
(lovely leds... i want to install asap, so legit)
(fan for nice and cool breeze on me face)
(a mess of soldering equipment)
(switch for the lights on outside for easy on/off access)
(not to noticable, might trim the switch toggle down a bit more...)
thehunter7
Member
Well thanks. I scrapped the ODST shoulder because liked other ones. And yes I know it sits on it, in an early picture and was just testing out the build. Um yes it is big but im a big guy and it works. Thanks for looking
those 2 parts sounded full of sarcasm. :/
- Status
