bevbor's armor

Status
Not open for further replies.
Just finished second RG handplate

2144456931_99f7236bfe_b.jpg

2145249520_66bbc6d265_b.jpg

2144455955_5754a6bfea_b.jpg

2144456447_d93d7dc1e0_b.jpg

2145249056_e32fe575f3_b.jpg
 
Hi all,
Here is my first experience on resining Robogenisis' stuff.
As stand for piece I used glass cup, works fine :)
2174996940_d539f55388_b.jpg

2174996760_4e5936ec1b_b.jpg
 
Falling_Jihad said:
why didn't you resin your helm

Edit: or was the hand plate just test

Yep.
It's only test.
I did never before resining something :).
Therefore I started on small part.
 
Last edited by a moderator:
Looks nice. And the handplates look good... and shiny... and really blue :D
Can't wait to see how everything turns out painted and detailed (You are going to detail a bit, right?)
 
Robogenisis said:
Looks nice. And the handplates look good... and shiny... and really blue :D
Can't wait to see how everything turns out painted and detailed (You are going to detail a bit, right?)
Yes, I want to do much details I can, but I have only Halo CE Trial :) and nothing more :)
 
Last edited by a moderator:
Robogenisis said:
You are going to detail a bit, right?

What detailing would you recommend? All I see to do is smooth out the curves on the two outside triangles and in the circular depressions.
 
Last edited by a moderator:
Skope said:
What detailing would you recommend? All I see to do is smooth out the curves on the two outside triangles and in the circular depressions.
I think to add some so called "floating faces" from the last FS's model to my helmet. Neck piece, visor area and other I missed on my helm.
 
Last edited by a moderator:
ok, so heres what happened..

(see pic)
[attachment=2560:bluehelm.jpg]
#1. that ridge was the mistake, it should not have gone past the top of the helmet, i noticed that a bit too late.
#2. that one wasnt that bad on my model, woah its sticking up way too far,, the second pic attached is my screenshot of when i decided to re-do the helmet, spotting my flaws..(was originally posted in my thread)
#3. this part was not too bad, but i wanted it to be perfect, again, i noticed it too late, and fixed it for my newest helmet..
its also easier to build.
link is in my sig.
[attachment=2561:messy.jpg]
 
dannifood4less said:
ok, so heres what happened..

Okay, you succeeded to persuade me... I'll toss it out the window :mad:



J/k, anyway I'll finish it, and only after I'll start your new model :)
Thank you for your correction work. I'm already succeeded to sink a little these parts that are
high too much. Photos will be soon.
 
Last edited by a moderator:
bevbor said:
I think to add some so called "floating faces" from the last FS's model to my helmet. Neck piece, visor area and other I missed on my helm.
Oh, I was thinking he referred to the handplates
 
Last edited by a moderator:
bevbor said:
Okay, you succeeded to persuade me... I'll toss it out the window :mad:
J/k, anyway I'll finish it, and only after I'll start your new model :)
Thank you for your correction work. I'm already succeeded to sink a little these parts that are
high too much. Photos will be soon.
, well, seeing the work youve done with robogenisis' handplates, i would reccomend using the newwest helmet that flying squirl is doing, it should be finished by then, and it has more details than any other model
 
Last edited by a moderator:
dannifood4less said:
, well, seeing the work youve done with robogenisis' handplates, i would reccomend using the newwest helmet that flying squirl is doing, it should be finished by then, and it has more details than any other model

Yes, I will!
But only after I finish current helmet. :)

For now I have prepared fiberglass pads for handplates:
2188750341_b2a585923d_b.jpg

2189538488_74da4c6a80_b.jpg
 
Last edited by a moderator:
Thank you guys for your appreciation. But I cannot stop and today
finished out of pep the MC Left Boot HD RG Model.
2193939966_6e42cd4487_b.jpg

2193940796_0375b04d35_b.jpg

2193941644_0f46a9cb46_b.jpg

2193152725_665a6355a9_b.jpg
 
Status
Not open for further replies.
Back
Top