Skyrim Pepakura Files

[zombiegrimm]

Someone asked for a Daedric Arrow, and so I just unfolded every arrowhead. I did not unfold the Nord Hero Arrow, as it is the same as the Draugr arrowhead. I only unfolded the arrowheads, as making the shaft out of paper doesn't really seem to work that well. Each arrowhead measures the same size, which is roughly six to seven inches. Enjoy!

Daedric ArrowHead

Download Link: http://www.4shared.com/file/9J-ktNLC/Daedric_ArrowHead.html

Draugr ArrowHead

Download Link: http://www.4shared.com/file/yv7DGw6p/Draugr_ArrowHead.html

Dwarven ArrowHead

Download Link: http://www.4shared.com/file/eKghuP08/Dwarven_ArrowHead.html

Ebony ArrowHead

Download Link: http://www.4shared.com/file/pJt3JSGW/Ebony_ArrowHead.html

Elven ArrowHead

Download Link: http://www.4shared.com/file/WAMTrro8/Elven_ArrowHead.html

Falmer ArrowHead

Download Link: http://www.4shared.com/file/kCwbsnt8/Falmer_ArrowHead.html

Forsworn ArrowHead

Download Link: http://www.4shared.com/file/WWkix6Kn/Forsworn_ArrowHead.html

Glass ArrowHead

Download Link: http://www.4shared.com/file/-Nd6KyXW/Glass_ArrowHead.html

Iron ArrowHead

Download Link: http://www.4shared.com/file/uVQSwcEn/Iron_ArrowHead.html

Orcish ArrowHead

Download Link: http://www.4shared.com/file/2OAcvEdn/Orcish_ArrowHead.html

Steel ArrowHead

Download Link: http://www.4shared.com/file/HrtlESvV/Steel_ArrowHead.html

 

[shanesinsanevids]

thank you so much!

 

[MRNEEK]

These are amazing! Thank you for posting them.

 

[spartan 087]

Just found this thread and the daedric armor is going on the list of things that I want to make or will make but need to find time

 

[Geodude487]

LOVE the complete set of Daedric armor. As my first pepakura file is actually the Dragonplate Helmet what are the chances of getting you to unfold a set of the Dragonplate Armor? I know you are very busy and hard at working unfolding many files so this is just a simple request of if you have the time to get to it. Thank you and keep up the amazing work. Also if you have any advice on scaling it would be greatly appreciated. Also if you have any tips on unfolding, I have found the .obj file of the Imperial Logo (aka now the Skyrim Logo) and have loaded it into Pepakura, but alas the unfold is terrible and does not work. Any advice in this regards would be extremely helpful as I would love this emblem hanging in my room once I complete that project.

 

[zombiegrimm]

LOVE the complete set of Daedric armor. As my first pepakura file is actually the Dragonplate Helmet what are the chances of getting you to unfold a set of the Dragonplate Armor? I know you are very busy and hard at working unfolding many files so this is just a simple request of if you have the time to get to it. Thank you and keep up the amazing work. Also if you have any advice on scaling it would be greatly appreciated. Also if you have any tips on unfolding, I have found the .obj file of the Imperial Logo (aka now the Skyrim Logo) and have loaded it into Pepakura, but alas the unfold is terrible and does not work. Any advice in this regards would be extremely helpful as I would love this emblem hanging in my room once I complete that project.

I will get to Dragonplate Armor to complete the helmet. It is on the list of things to do. No worries. As for scaling, I'm not very good at it. I have no advice other than trial and error. Try a size and then scale up or down. Re print and do it again. Thats what I do.
As for the Skyrim logo, I don't really have any tips for unfolding. I can give it a try to see if I can unfold it for you. Then post it for all to have. Let me know.

 

[ReveilleWolfie]

All of this is amazing!

 

[flopper]

I have to say wow, the daedric armor pieces were exactly what i have been looking for.
Many thanks and keep up the good work!!!!

 

[megatimmy121]

Hi Geodude,
I understand from this post that you are unfolding the Skyrim logo. I would appreciate it if you send me the link to this (un)folded .pdo file

Thanks!

 

[SpartanC185]

There are no words for the amount of awesome you have created!!! I love the Daedric Armor, I am soo going to make that after I finish my current build!! Keep up the fantastic work!!

 

[zombiegrimm]

Thanks for all the comments!

Update time

Unfortunately, I just got my hand into a pretty bad accident two days ago. I was using the cutting bit on the dremel, and it slipped off the piece I was working on. It was on high speed, and chewed right through my hand. Tried to get stitches, but the dremel chewed everything up, so not enough skin left for that. Thankfully I was wearing protective gear, so my glove got pulled into the dremel as well. The glove jammed up the dremel, helping to prevent more serious damage. I'm so glad I was wearing protective gear.

I'm bandaged now, and on the mend, but because this happened, it will be a little slow for me to get files out. No worries, as I will try to still put out files with one damaged hand. Once my hand is completely healed, I'll be back on schedule releasing things.

 

[Z0M8I3]

Thanks for all the comments!

Update time

Unfortunately, I just got my hand into a pretty bad accident two days ago. I was using the cutting bit on the dremel, and it slipped off the piece I was working on. It was on high speed, and chewed right through my hand. Tried to get stitches, but the dremel chewed everything up, so not enough skin left for that. I'm bandaged now, and on the mend, but because this happened, it will be a little slow for me to get files out. No worries, as I will try to still put out files with one damaged hand. Once my hand is completely healed, I'll be back on schedule releasing things.

Wow, Sorry to hear this! Hope everything turns out ok for you. I think you've earned a break with all the skyrim stuff you've released anyways.

Goodluck and thank you!

 

[DocDailey]

Grimm,

I'm very sorry to hear you got hurt and I hope you heal up quickly.

 

[Mrpinski]

Just wanted to show off my Skyrim helmet

Started like this...

Finished like this...

Whole build is here: http://www.405th.com/showthread.php/36851-Skyrim-Helm-of-Yngol-FINISHED-PICS-PG2?highlight=mrpinski

I posted all of my steps with a bunch of pictures, maybe it will help others!

LOVE all the files! I may give a couple of them a shot!

 

[Rising Valkyrie]

Wow, haven't been on here in a while. Last time I posted I asked about the Steel armour. I was asking about Nordic Steel, but I would like to know if you have plans to make either Nordic steel or Steel Plated.
Also your S**t is F*****g Awesome. I've got every file and plan to make every file.

 

[Geodude487]

Hi Geodude,
I understand from this post that you are unfolding the Skyrim logo. I would appreciate it if you send me the link to this (un)folded .pdo file

Thanks!

I was attempting to unfold it and so far it's unsuccessful, but I will post the .obj file for Zombie to attempt to unfold. I will also post the unfolded .pdo that I've started. It is in no way a complete unfold.

Zombie very sorry to hear about your hand and hopefully you have a quick recovery.

Skyrim (Imperial) Logo (NOT FULLY UNFOLDED):

Download: http://www.4shared.com/file/KtnxqhtB/Skyrim_Logo.html?

Object File Skyrim (Imperial) Logo:

Download: http://www.4shared.com/file/WwIykFZz/logo.html?

 

[zombiegrimm]

I was attempting to unfold it and so far it's unsuccessful, but I will post the .obj file for Zombie to attempt to unfold. I will also post the unfolded .pdo that I've started. It is in no way a complete unfold.

Zombie very sorry to hear about your hand and hopefully you have a quick recovery.

Skyrim (Imperial) Logo (NOT FULLY UNFOLDED):

Download: http://www.4shared.com/file/KtnxqhtB/Skyrim_Logo.html?

Object File Skyrim (Imperial) Logo:

Download: http://www.4shared.com/file/WwIykFZz/logo.html?

I'm giving this a try, but if it gets unfolded at all, there will be a lot of small pieces. I might have to clean the object up a little, but I'll give it a try.

As for the Steel armor, it is on the to do list. Again, with my hand injured, it will take me while to release anything. You can't imagine how long it took to type this much.

I've just pulled apart all of the Dwarven Male armor. I will try to unfold it in the next few days, as time and healing permit.

 

[Cloviz]

Man it really sucks to hear about your hand. Just don't push it

 

[Admiral Tiberius]

Wow that would be a hard piece to put together no matter how you unfolded it. Would like to see someone do it though. I made one of these emblems on my Xbox with bondo and an exacto knife, but It would be cool to pep it.

 

[prev]

Zombiegrimm, those files look awesome!!!! Can't wait for the Steel or Ebony armour files...