theBR1T1SHkid
Jr Member
I started work a month ago on my Halo: Reach multiplayer spartan build, and I think I finally have enough progress to start a thread. So lets get to it!
This is what he will somewhat look like when this project is done, but with a few differences. I plan to remove the collar from the chest, but keep the breacher shotgun part. The ODST shoulder pads are yet to be confirmed, and the maroon primary will be darker. I have a few other ideas formulating in my head, but i will have to see what becomes of them.
I decided the best way to introduce myself to pepping was to make something simple. Credit to Ruze789 for the Spartan III Knee I made from some 80GSM paper I had lying around. I think it came out rather well.
I think it came out rather well and it was going to be a few weeks before I would get the chance to get some 110gsm paper, so i made an ODST shoulder (credit to Kirrou) and CQC shoulder (credit to Ruze789) in my wait for some more practice.
Some of the details didn't hold up well on them, but it helped me learn some good skills.
I got the 110gsm paper, and it was time to make the Mark VI helmet (Credit to DF4L).
I decided to make it in several large 'segments' that could all connect. That was good for most of the helmet, but not the top. And the fruits of my labour (sorry there aren't many progress pics, will try to take some more next time):
(Please ignore the sheets, got them out for winter and have had them for many years now)
I think it looks pretty symmetrical
Staring up at my nice Reach poster above my bed
Of course, everything has its fair share of problems:
All of them shouldn't be too noticeable after some bondo.
This is what he will somewhat look like when this project is done, but with a few differences. I plan to remove the collar from the chest, but keep the breacher shotgun part. The ODST shoulder pads are yet to be confirmed, and the maroon primary will be darker. I have a few other ideas formulating in my head, but i will have to see what becomes of them.
I decided the best way to introduce myself to pepping was to make something simple. Credit to Ruze789 for the Spartan III Knee I made from some 80GSM paper I had lying around. I think it came out rather well.
I think it came out rather well and it was going to be a few weeks before I would get the chance to get some 110gsm paper, so i made an ODST shoulder (credit to Kirrou) and CQC shoulder (credit to Ruze789) in my wait for some more practice.
Some of the details didn't hold up well on them, but it helped me learn some good skills.
I got the 110gsm paper, and it was time to make the Mark VI helmet (Credit to DF4L).
I decided to make it in several large 'segments' that could all connect. That was good for most of the helmet, but not the top. And the fruits of my labour (sorry there aren't many progress pics, will try to take some more next time):
(Please ignore the sheets, got them out for winter and have had them for many years now)
I think it looks pretty symmetrical
Staring up at my nice Reach poster above my bed
Of course, everything has its fair share of problems:
All of them shouldn't be too noticeable after some bondo.