Halo Infinate 3D printed build

[WolfS117]

I been doing a lot of sanding. Primer. And silver base coat, intentionally not a smooth layer of silver for the dirtyetal look for a battle damage to come.

 

[WolfS117]

Vasaline, and small stones on the silver and then the green on top.

I'm going for the Cheif had a bad day look.

 

[WolfS117]

Helmet is almost done. Just have the foam to fit inside. And a few paint touch ups I'm not happy with the black dots on the moth guard.

Custom designed 3d printed fan and switch mount. One is for the fan control and the other is for the led lights.

Battery packs placed balance out the weight nicely. It doesn't list forward or backward at all.

 

[WolfS117]

Gloves are done.

They are touchscreen enabled which is nice.

 

[WolfS117]

In a burst of creativity. I fitted the straps to the chest peice and added the Witcher logo to the chest. I hate that it looks like the TV show armour, however I planned to do this before the show came out so there.

I do need some clips for the side I need ones that push a button to release as the sides won't be accessible.

 

[WolfS117]

3D printed. Orange tip for my assault rifle. It slips in and out nicely and doesn't fall out accedently.

 

[WolfS117]

A bit of a look at straps for the legs and cod. It sits very comfortably, except the shins they are a pain.im thinking pad the sides so they don't slip round my leg

 

[WolfS117]

Full test fit one. There is still a few tweeks to make it perfect.

I want to adjust the biceps.
I want to re print the forearms
I think I choked the fan Inside the helmet so it isn't really blowing much air.

Other than that I am quite pleased.

 

[JSLund]

I think you did a great job on your build. did you document the repaint and mod on the AR?

 

[JSLund]

Right here it is undersuit items time.

Planning to use a motorcycle 1 peice breathable undersuit as the base layer.

I bought a stormtrooper neck seal off etsy, it's comfy and easy.

On the shins I am reckoning fitting comfy knee pads inside the shins with some additional padding to make them nice and snug.

On the torso I have had an idea which is a spin on the classic downhill bike armour everyone uses.

I found a molle belt as well as thigh straps for gun holsters. The thigh straps I plan to connect to the thighs to mount them nicely. And also I grabbed two molle pouches that will fit and be practical for stuff. Ammo, plasma nades. I then plan to connect the molle belt to the belt peice to the body armour to make it all nice and tight and secure.

I can also attach the cod peice parts to this belt. It think it will look right and be practical too.

View attachment 318659

View attachment 318660

I like the choices you made for this under suit do you have links to the items or the names of the products you purchased? I really love the inclusion of hip packs for storage.

 

[WolfS117]

I like the choices you made for this under suit do you have links to the items or the names of the products you purchased? I really love the inclusion of hip packs for storage.

Hey.

Links to some bits that are I got. Obviously there is lots of other bits and pieces but they are generic straps etc. But the unique bits are there.


OneTigris Tactical Battle Belt - Quick Release Tactical Molle Belt Combat Belt Padded Patrol Duty Belt OneTigris Tactical Battle Belt - Quick Release Tactical Molle Belt Combat Belt Padded Patrol Duty Belt (large) : Amazon.co.uk: Sports & Outdoors

ZhaoCo Tactical Molle Pouch, Compact Utility Belt Pouch Military Army EDC Pouch Waist Bag Fanny Packs for Sports Hiking Camping https://amzn.eu/d/9Ggc1AD

EXCELLENT ELITE SPANKER Tactical Drop Leg Holster Molle Leg Platform Left or Right Nylon https://amzn.eu/d/b8jPovY

GES Motorcycle Body Protective... https://www.amazon.co.uk/dp/B01N7PRA36?ref=ppx_pop_mob_ap_share

Doopai Tactical Belts for Men... https://www.amazon.co.uk/dp/B08BFVVN8Z?ref=ppx_pop_mob_ap_share

Extreme Racing one Piece Base... https://www.amazon.co.uk/dp/B07KTY4S7M?ref=ppx_pop_mob_ap_share

Flying swallow Pack of 20 Black Hook and Loop Strap Fastener Cable Ties re-useable Straps（300 mm x 25 mm) https://amzn.eu/d/7FDCia2

 

[WolfS117]

I think you did a great job on your build. did you document the repaint and mod on the AR?

I didn't really document it. I have added some photos below.

I just watched a few vids on YouTube for inspiration. But graphite powder is 100% a great look, with blacks and guetal silver.

The electrics for the light were quite simple but the right size light was a but of luck EverBrite LED Mini Torch,... https://www.amazon.co.uk/dp/B096RZ52VT?ref=ppx_pop_mob_ap_share

The lens of this light fits the nerf gun light exactly. You need the drill the plastic core bit out as it has retention pins but once you done that. A bit of hacksawing on the light itself and a few soldiering skills and you have a working light. If you wanted to you could even keep the working nerf guts in the gun and power of the d cells. I took that all out as some conventions don't allow working nerf.

The thing I did that I haven't seen anyone do, is I sprayed matt black near the muzzle and it gave it a light black dusting which gave a muzzle burn look which I think you can just about see in the 3rd photo. Truste it looks more convincing in person.

 

[JSLund]

I didn't really document it. I have added some photos below.

I just watched a few vids on YouTube for inspiration. But graphite powder is 100% a great look, with blacks and guetal silver.

The electrics for the light were quite simple but the right size light was a but of luck EverBrite LED Mini Torch,... https://www.amazon.co.uk/dp/B096RZ52VT?ref=ppx_pop_mob_ap_share

The lens of this light fits the nerf gun light exactly. You need the drill the plastic core bit out as it has retention pins but once you done that. A bit of hacksawing on the light itself and a few soldiering skills and you have a working light. If you wanted to you could even keep the working nerf guts in the gun and power of the d cells. I took that all out as some conventions don't allow working nerf.

The thing I did that I haven't seen anyone do, is I sprayed matt black near the muzzle and it gave it a light black dusting which gave a muzzle burn look which I think you can just about see in the 3rd photo. Truste it looks more convincing in person.


View attachment 322726

View attachment 322727

View attachment 322728
View attachment 322729

This is amazing thanks for the closer look, I am excited to do mine now for sure!

 

[WolfS117]

This is amazing thanks for the closer look, I am excited to do mine now for sure!

I will be going to a con soon and will try to get some good glamour shots. Currently I don't have any decent photos

 

[JSLund]

I will be going to a con soon and will try to get some good glamour shots. Currently I don't have any decent photos

Definitely make sure you have someone there to take pictures for you, many first timers get caught up in the moments and forget about their own photos. It happened to me.

 

[marinesniper]

i agree with jslund i did it and had to try to find people who where there to get pics. but your doing a great job want to see more pics love rifle great paint job on that as well..

 

[WolfS117]

More of the rifle.

 

[WolfS117]

Few helmet shots.
I like the layer lines in a few places somehow I feel it adds.

And I grabbed a handy motorcycle helmet bag for the helmet. Fits a treat.

 

[WolfS117]

Added some clause ups of the boots. These need some paint touch ups and I am even tempted to re print them and I am not 100% happy. They feel really long.

However still better than just a pair of trainers.

 

[Dire]

Hey! Looks cool, where did you get the fan, looks like it would do a decent job, I want