halo infinite mk7 build

Status
Not open for further replies.
Are you going to make a gun to go along with the suit? If so, I would recommend you make one of the new guns, like the bulldog or sidekick, Otherwise, your suit rocks!
 
Looks awesome! How did you fuse together the shoulders? It looks like wood but I'm not sure.
I just took a strip of metal and bent it so that the shoulder pieces were where I wanted them, then I just used epoxy to glue the pieces and the metal strip together.
 
Update time! Purchased a resin mk7 helmet cast from EVAkura , and she's a beaut! Much better than the 3d printed one I was planning on using. Can't wait to finish it up!
 

Attachments

  • IMG_20210718_185350_757.jpg
    IMG_20210718_185350_757.jpg
    3.5 MB · Views: 134
  • PXL_20210720_161817318.jpg
    PXL_20210720_161817318.jpg
    3.4 MB · Views: 134
  • PXL_20210720_161844801.jpg
    PXL_20210720_161844801.jpg
    1.9 MB · Views: 133
  • PXL_20210719_220749431.jpg
    PXL_20210719_220749431.jpg
    4.2 MB · Views: 128
  • PXL_20210717_173652599.jpg
    PXL_20210717_173652599.jpg
    3.6 MB · Views: 117
  • PXL_20210717_173705715.jpg
    PXL_20210717_173705715.jpg
    3.5 MB · Views: 122
  • PXL_20210717_173712035.jpg
    PXL_20210717_173712035.jpg
    3.1 MB · Views: 125
Mk7 with scorpion punch is finished! (aside from padding and fans) and I'm really happy with how it turned out, even though I may have gone a bit overboard with the battle damage anywho, lemme know what you think!
 

Attachments

  • PXL_20210803_144743510.jpg
    PXL_20210803_144743510.jpg
    1.6 MB · Views: 114
  • PXL_20210803_144803465.jpg
    PXL_20210803_144803465.jpg
    1.9 MB · Views: 111
  • PXL_20210803_144822046.jpg
    PXL_20210803_144822046.jpg
    1.8 MB · Views: 109
  • PXL_20210803_144839856.jpg
    PXL_20210803_144839856.jpg
    1.7 MB · Views: 102
  • PXL_20210803_144856684.jpg
    PXL_20210803_144856684.jpg
    1.8 MB · Views: 103
  • PXL_20210803_145024275.jpg
    PXL_20210803_145024275.jpg
    1.5 MB · Views: 104
  • PXL_20210803_144952782.jpg
    PXL_20210803_144952782.jpg
    1.6 MB · Views: 114
Quick progress/photo dump. Arms are complete and torso is finished printing. Belt armor is hot on the printer, and once that's finished all the pieces will be printed!
 

Attachments

  • PXL_20210905_180905949.jpg
    PXL_20210905_180905949.jpg
    1.9 MB · Views: 95
  • PXL_20210905_145946516.jpg
    PXL_20210905_145946516.jpg
    2.6 MB · Views: 94
  • PXL_20210905_145935046.jpg
    PXL_20210905_145935046.jpg
    2.2 MB · Views: 93
  • PXL_20210905_145922417.jpg
    PXL_20210905_145922417.jpg
    2.8 MB · Views: 97
  • PXL_20210909_181045834.jpg
    PXL_20210909_181045834.jpg
    2.5 MB · Views: 99
  • PXL_20210914_145134581.jpg
    PXL_20210914_145134581.jpg
    2.9 MB · Views: 101
Status
Not open for further replies.
Back
Top