Hey everyone. I'm looking to buy (and learn how to use) a 3d printer, especially for the use of making various cosplay armor (especially Halo). I've seen posts saying they've their armor is made from a 3d printer, but never found any information on what they used and how (and the search bar sucks). So I'm really looking for some information, I'd appreciate it. I'd like to get something around or under $500, and to use ABS plastic. I'd like to get a widely used printer with lots of support, and I guess FDM from research. Also, most likely a pre-assembled printer (unless it is fairly simple to put a kit or purchase different pieces and assemble). I assume since most affordable printers are smaller I'd have to print each piece in smaller pieces and glue them together, what's the best glue for abs plastic...a 2 part expoy (will this melt the plastic?), or super glue? Thank you everyone for any information you can provide, or if this endeavor is even worth it.
On a side note, I have experience in foam and pep, not sure if 3d printed pieces need to be reinforced with anything to be worn. I also never posted my finished ODST build, not that great (first attempt from scratch) but I had a blast:
On a side note, I have experience in foam and pep, not sure if 3d printed pieces need to be reinforced with anything to be worn. I also never posted my finished ODST build, not that great (first attempt from scratch) but I had a blast: