My Mandalorian Project

Sadly the helmet was knocked of a couch on New Year’s Eve, however I am still capable of fixing it. It’ll take a while but I hope to have it fixed as fast as possible. We still have the epoxy, spray paints, and an extra visor so I’m set for repairs. The current main issue is that I need to find the proper time to fix it.

IMG_2208.jpeg
 
You'll have it fixed before you know it. If you can't hide the cracks, you could make them gold like Gideon's night troopers, or add weld lined like on Rex's helmet. Incorporate the damage type of thing. It is the way.
 
The repairing of the helmet has begun ✨✨✨
 

Attachments

  • IMG_2616.jpeg
    IMG_2616.jpeg
    1.5 MB · Views: 16
  • IMG_2614.jpeg
    IMG_2614.jpeg
    1.3 MB · Views: 17
  • IMG_2613.jpeg
    IMG_2613.jpeg
    1.6 MB · Views: 19
  • IMG_2611.jpeg
    IMG_2611.jpeg
    1.6 MB · Views: 17
  • IMG_2610.jpeg
    IMG_2610.jpeg
    1.4 MB · Views: 18
  • IMG_2609.jpeg
    IMG_2609.jpeg
    1.4 MB · Views: 18
  • IMG_2608.jpeg
    IMG_2608.jpeg
    1.3 MB · Views: 18
  • IMG_2606.jpeg
    IMG_2606.jpeg
    1.2 MB · Views: 18
  • IMG_2603.jpeg
    IMG_2603.jpeg
    2.7 MB · Views: 20
  • IMG_2600.jpeg
    IMG_2600.jpeg
    1.5 MB · Views: 16
We have reattached the piece that was broken off, and I plan to try and figure out some kind of structural support in the future that properly holds the sides in place better. But for now, I’m focused on the fixes and the repaint.
 

Attachments

  • IMG_2635.jpeg
    IMG_2635.jpeg
    1.5 MB · Views: 15
  • IMG_2634.jpeg
    IMG_2634.jpeg
    1.4 MB · Views: 14
  • IMG_2631.jpeg
    IMG_2631.jpeg
    1.6 MB · Views: 14
  • IMG_2630.jpeg
    IMG_2630.jpeg
    1.6 MB · Views: 16
  • IMG_2628.jpeg
    IMG_2628.jpeg
    1.4 MB · Views: 14
  • IMG_2636.jpeg
    IMG_2636.jpeg
    1.5 MB · Views: 15
  • IMG_2637.jpeg
    IMG_2637.jpeg
    1.3 MB · Views: 14
We have reattached the piece that was broken off, and I plan to try and figure out some kind of structural support in the future that properly holds the sides in place better. But for now, I’m focused on the fixes and the repaint.
I know Galactic Armory used a fiber glass resin to reinforce one of his Mandalorian helmets. You could also do UV resin instead. Just make sure to use proper protection!
Video link:
 
The piece that broke off is now fully reattached with 2-part epoxy resin, and I recently did some sanding to try and smooth it down, so I’ll need to do some paint touch-ups soon.

IMG_2856.jpegIMG_2857.jpegIMG_2858.jpegIMG_2859.jpegIMG_2860.jpegIMG_2861.jpeg
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top