Props P90 Wip

Gosemer · Jul 22, 2008

werewolf7171 · Jul 22, 2008

From what I can see in the picture, it looks like a good start. You should add some more pictures from different angles so we can see it better. But none-the-less good job thus far.

Gosemer · Jul 22, 2008

werewolf7171 said:
From what I can see in the picture, it looks like a good start. You should add some more pictures from different angles so we can see it better. But none-the-less good job thus far.

triin to post pics.. havin issues..cant delete pics gfrom my album to add more

paradoxdj · Jul 22, 2008

i love that show and that gun, i have 1 or 2 pep files for the p90 but i have to cardstock paper at the moment so i can't make it

looks good but it would be nice to see more pics of it =D

rundown · Jul 23, 2008

lolz i have that pep to^^
i printed it out and it was so tiny, i never finished it

Gosemer · Jul 23, 2008

rundown said:
lolz i have that pep to^^
i printed it out and it was so tiny, i never finished it

just resize it its a very good pep...about 89 percent accurate...

im 6ft 4 inches tall..and about....2hundredand....gri\umble murmur cough cough...85 lbs...so i could give u the scale i used..its perfectly scaled to me..but if ur like 14 and 85 lbs n 4 ft tall..it may look like a howetzer on ya...lemme know..oh i finally got the pics to post..woohooo

Gosemer · Jul 23, 2008

paradoxdj said:
i love that show and that gun, i have 1 or 2 pep files for the p90 but i have to cardstock paper at the moment so i can't make it

looks good but it would be nice to see more pics of it =D

awsopme..would ya minsd sharin the pep files?

The Kraken · Jul 23, 2008

Unless it's the model, you messed part of it up. That little extended rectangle coming from under the muzzle break looks like it should be tucked in under the muzzle. Also, that's not how you hold a P90...the finger guard is a little small for a foregrip, isn't it?

http://home.in.tum.de/~geisinge/sgm/galler.../Carter_P90.jpg
Proper way to hold the P90, and you can kinda see where the rectangle should be. There just shouldn't be that big of a gap between the muzzle and the receiver.

The gap:
http://i43.photobucket.com/albums/e400/Gos.../Picture100.jpg

Without gap:
http://www.specwar.info/vybava/vyzbroj/FN_P90/p01.jpg

Sorry if this is coming off an extremely negative, you have more patience than I ever would with a pep gun. I'm just a gun enthusiast and I'm picky when it comes ones I especially know...

Gosemer · Jul 23, 2008

The Kraken said:
Unless it's the model, you messed part of it up. That little extended rectangle coming from under the muzzle break looks like it should be tucked in under the muzzle. Also, that's not how you hold a P90...the finger guard is a little small for a foregrip, isn't it?

http://home.in.tum.de/~geisinge/sgm/galler.../Carter_P90.jpg
Proper way to hold the P90, and you can kinda see where the rectangle should be. There just shouldn't be that big of a gap between the muzzle and the receiver.

The gap:
http://i43.photobucket.com/albums/e400/Gos.../Picture100.jpg

Without gap:
http://www.specwar.info/vybava/vyzbroj/FN_P90/p01.jpg

Sorry if this is coming off an extremely negative, you have more patience than I ever would with a pep gun. I'm just a gun enthusiast and I'm picky when it comes ones I especially know...

well ty..thats why i posted it..as for that gap...
http://www.specwar.info/vybava/vyzbroj/FN_P90/p01.jpg

if u look really closely..there is a small block above what i have built that fills that gap...i just didnt put it in yet...that eliminates the gap issue..as for the peice underneath the barell muzzel..i scratch built that to hold the two little deallys in place till tey dried real well..it comes off lol..its just a brace ...ty for ur comments.

The Kraken · Jul 24, 2008

Gotcha. Still not seeing the gap, though...I see a STICKER... lol.

Gosemer · Jul 24, 2008

The Kraken said:
Gotcha. Still not seeing the gap, though...I see a STICKER... lol.

ok the thingy u refered top as not looking like it belonged..it doesnt..i took the block that goes in that gap and glued it there w a scratch bult brace to use in assistance of keeping the silencer/barell..straight until driing...but am having trouble getting the silencer file to scale correctly for the scale i made the gun...when i finally get the silencer/barell made and installed..ill use that brace i amde to hold it till dry...then remove it and install it where it orriginally was meant to go(in that gap)...the sticker is on top of the block....i hope that clears the gap issue up for you lol...as i said it is a wip...thus no where near complete...

when i finally figure the silencer out and get installed..ill resin the entire thing....then endoglass it...then clean up the outside and detail it...there are a ton of peioces i need to scratch build for the detailing etc......then ill paint it and seal it w a flat clear coat.......that is the game plan anyways..but i still have my armor to finish first..i merely took a break to make that gun for little brother)..had issues w the chest peice(made 3 times at diff scales and still wont fit properly..).....(im a big man...so the chest is giving me fits)....but got the gun built now gonna try the chest peice again lol just needed a breather.

The Kraken · Jul 24, 2008

ahhhh okay I was not understand what you meant. Gotcha. Well keep up the good work! Can't wait to see this finished.

Props P90 Wip

Gosemer

Jr Member

werewolf7171

Jr Member

Gosemer

Jr Member

paradoxdj

Well-Known Member

rundown

Sr Member

Gosemer

Jr Member

Gosemer

Jr Member

The Kraken

Member

Gosemer

Jr Member

The Kraken

Member

Gosemer

Jr Member

The Kraken

Member

Similar threads

Similar threads