Prometheus935
New Member
Hi guys, just wanted to show off my Halo 4 armour build that I just finished making. I don't have any pictures of the progress but I have a lot of the finished build. This took me almost two years to make and I hope you like it.
Armour parts and links to their files:
Helmet: Solider - http://www.4shared.com/file/3w3aDmOW/Halo_4_helmet_demon__Satchmo_I.html (Check this guy's work out its amazing - Satchmo)
Chest: Rouge - http://www.4shared.com/file/TGneRshS/Rogue_H4_-_Torso_By_AZTLAN__A4.html
Right Shoulder: Ricochet - http://www.4shared.com/file/10BT7tDZce/Ricochet_SHLDR.html?
Left Shoulder: Pathfinder - http://www.4shared.com/file/pv-lF4u8ce/Pathfinder_SHLDR.html?
Hand Plate: http://www.4shared.com/file/GeduvMKU/H4_Hand_by_xenogarth.html
Gauntlets: Inner-plated - http://www.4shared.com/file/zaGb6ucdba/Inner-Plated_ARM.html?
Legs: ODST - In 405th archive under Halo 4 ODST
Weapons: Halo reach Knife - (Dead link if you want PM me)
M6C/SOCOM - http://www.4shared.com/file/AdxDmy_Qba/halo_3_odst_silenced_pistol_wm.html? (I didn't unfold this however I did have to scale it down to the correct size)
This is my custom spartan form Halo 4 that I based my armour off.
Here is the finished armour on a duck-tape dummy.
Here are some close ups:
Helmet:
Chest:
Front
Back
The Chest is in two halves; front and back. They are held together with magnets at the top and bottom and for extra support at the bottom there are also plastic clips.
Left picture shows top connection piece with magnets. Right picture shows bottom connection piece with magnets and plastic clips.
Shoulders:
Right shoulder, Left shoulder
Gauntlets:
Outside of gauntlet, inside of gauntlet, gauntlet with glove.
Hand plate.
Legs:
Legs front, Legs back, Thigh with M6C/SOCOM
Shin, boots
Armour parts and links to their files:
Helmet: Solider - http://www.4shared.com/file/3w3aDmOW/Halo_4_helmet_demon__Satchmo_I.html (Check this guy's work out its amazing - Satchmo)
Chest: Rouge - http://www.4shared.com/file/TGneRshS/Rogue_H4_-_Torso_By_AZTLAN__A4.html
Right Shoulder: Ricochet - http://www.4shared.com/file/10BT7tDZce/Ricochet_SHLDR.html?
Left Shoulder: Pathfinder - http://www.4shared.com/file/pv-lF4u8ce/Pathfinder_SHLDR.html?
Hand Plate: http://www.4shared.com/file/GeduvMKU/H4_Hand_by_xenogarth.html
Gauntlets: Inner-plated - http://www.4shared.com/file/zaGb6ucdba/Inner-Plated_ARM.html?
Legs: ODST - In 405th archive under Halo 4 ODST
Weapons: Halo reach Knife - (Dead link if you want PM me)
M6C/SOCOM - http://www.4shared.com/file/AdxDmy_Qba/halo_3_odst_silenced_pistol_wm.html? (I didn't unfold this however I did have to scale it down to the correct size)
This is my custom spartan form Halo 4 that I based my armour off.
Here is the finished armour on a duck-tape dummy.
Here are some close ups:
Helmet:
Chest:
Front
Back
The Chest is in two halves; front and back. They are held together with magnets at the top and bottom and for extra support at the bottom there are also plastic clips.
Left picture shows top connection piece with magnets. Right picture shows bottom connection piece with magnets and plastic clips.
Shoulders:
Right shoulder, Left shoulder
Gauntlets:
Outside of gauntlet, inside of gauntlet, gauntlet with glove.
Hand plate.
Legs:
Legs front, Legs back, Thigh with M6C/SOCOM
Shin, boots