Under suits mk vii and master chief

marinesniper

Sr Member
Member DIN
S118
I am almost done printing the under suit off master chief infinite and I am in the process of body work on the mark 7 under suit I will cast both of these in latex rubber so they will be really flexible
 

Attachments

  • IMG20231111140617.jpg
    IMG20231111140617.jpg
    1.4 MB · Views: 108
  • IMG20231111140643.jpg
    IMG20231111140643.jpg
    1.3 MB · Views: 106
  • IMG20231102115333.jpg
    IMG20231102115333.jpg
    3.3 MB · Views: 103
  • IMG20231102115356.jpg
    IMG20231102115356.jpg
    2.5 MB · Views: 108
That's really cool! Are you going to do the entire under suit that way?
Yes all of the under suit will be done this way. i have update going up here in a few but the under suit will be very flexable and if i can get this right the under suit will be where it can be trimmed to fit right with out loseing details
 
Ok here is where I am I need to print out the other knee gasket and finish the detail work you know the seem lines and then I will be molding them start casting the parts. Enjoy the pictures
 

Attachments

  • IMG20231117222518.jpg
    IMG20231117222518.jpg
    1.4 MB · Views: 63
  • IMG20231117221950.jpg
    IMG20231117221950.jpg
    1.3 MB · Views: 58
  • IMG20231117221943.jpg
    IMG20231117221943.jpg
    1.2 MB · Views: 50
  • IMG20231117221917.jpg
    IMG20231117221917.jpg
    1 MB · Views: 57
  • IMG20231117221913.jpg
    IMG20231117221913.jpg
    1.2 MB · Views: 55
  • IMG20231117221748.jpg
    IMG20231117221748.jpg
    1.1 MB · Views: 52
  • IMG20231117221743.jpg
    IMG20231117221743.jpg
    1,016.8 KB · Views: 50
  • IMG20231117221740.jpg
    IMG20231117221740.jpg
    1 MB · Views: 55
  • IMG20231117221552.jpg
    IMG20231117221552.jpg
    1 MB · Views: 50
  • IMG20231117221546.jpg
    IMG20231117221546.jpg
    1.2 MB · Views: 60
  • IMG20231117221429.jpg
    IMG20231117221429.jpg
    1.2 MB · Views: 55
  • IMG20231117221418.jpg
    IMG20231117221418.jpg
    1.2 MB · Views: 56
  • IMG20231117221830.jpg
    IMG20231117221830.jpg
    1.1 MB · Views: 55
  • IMG20231117221852.jpg
    IMG20231117221852.jpg
    1.3 MB · Views: 61
Man this material has gone up since I used it last wow just got part of my order yesterday.
 
Last edited:
This is super creative and innovative! I cant wait to see the finished project as an actual functional under suit. If this turns out as cool as I think it will, I'm gonna have to pull it off myself
 
thanks im hoping to get these body suit done pretty fast but with the holidays my supplies are hit and miss i figure it will all come in after the new year holidays are over..
 
I am almost done printing the under suit off master chief infinite and I am in the process of body work on the mark 7 under suit I will cast both of these in latex rubber so they will be really flexible
Would you be able to provide me a tutorial on how you made yours and where I can find the products you used? Thanks.
 
Superbly done! Is this the InstinctCeative 3D files?
im getting ready to embark on a similar journey and would also love to get some general tutorial info on your urethane molding and casting process. I’ve made fiberglass molds from bucks and then cast fiberglass parts from the molds but have not done anything yet with silicone or urethane casting.
 
Superbly done! Is this the InstinctCeative 3D files?
im getting ready to embark on a similar journey and would also love to get some general tutorial info on your urethane molding and casting process. I’ve made fiberglass molds from bucks and then cast fiberglass parts from the molds but have not done anything yet with silicone or urethane casting.
Yeah I'm waiting on my supplies for those big jobs but yeah I'm going to try to do a step by step so others can follow and yeah those files I had commissioned I'm going to have my friend show me how to make these file so I can design my own to sell.
 
Excellent! Looking forward to it. What 3D printer do you have? I’ve been doing everything on my PRUSA Mark 3 i3s which is really too small to tackle this build. I’m considering the Creality CR10 pro v2 with its 300 x 300 x 400 bed
 
I have 4 cr10's and then I have 5 of the longer lk5 pro and 4 of the ender 3 printers I really like the longer lk5 pro it prints really smooth. And for under 300 it's the same size bed as the cr10
 

Attachments

  • Screenshot_2024-01-09-20-06-06-05_dc00545bd3b8828f033a02ac25b2d36d.jpg
    Screenshot_2024-01-09-20-06-06-05_dc00545bd3b8828f033a02ac25b2d36d.jpg
    471.1 KB · Views: 23
I've been looking at getting the titlewave files and altering them to possibly work for a cloth and or foam undersuit. I was wondering if there were them as well and how detailed they are and could be converted to foam
 
Yes but for some reason if you try to put them in fusion or blender they look like any other file but when you save it the files go back to the originals
 
Maybe contact the model maker and see what’s up? When you acquired the files was there anything in the notes about not altering them?
 
Maybe contact the model maker and see what’s up? When you acquired the files was there anything in the notes about not altering them?
i think there was i sent him a note and ask him if he would flip the files to pdo but i never got a answer i will send him another message
 
This thread is more than 3 months old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top