1st 3D printed build (other two were EVA) suit is now in full 2.0 stage

Thanks, ill have to check them out. There's areas where I wouldn't mind putting lights on and definitely fans.
Super easy! And super cheap to build. I want to add magnets to my armor to hold things as well. I have been learning to plastic weld into my 3d prints. I also did the same for the lights, so you don't see as many wires. My dream is to have my weapons just cling to my armor.
 
looks good, im still working on my harness, i might have something to upload tonight, are you planning on going to any cons this summer? what region are you in?
I am in NJ, Yeah I am already signed up for Comic Con in NYC and Maybe doing the Garden State one. You?
 
its done ill pic dump, yea one of the shoulders started to come off, im aware.
g.jpg
 

Attachments

  • 296029618_1122461848304498_9116168059646178105_n.jpg
    296029618_1122461848304498_9116168059646178105_n.jpg
    594.7 KB · Views: 144
  • 295521430_558474952684283_6322258933630024540_n.jpg
    295521430_558474952684283_6322258933630024540_n.jpg
    689.4 KB · Views: 140
  • 294954063_726290631790233_103796545009647393_n (1).jpg
    294954063_726290631790233_103796545009647393_n (1).jpg
    575.4 KB · Views: 136
  • 294841106_1166931810532248_727890116458216428_n.jpg
    294841106_1166931810532248_727890116458216428_n.jpg
    550.8 KB · Views: 137
  • 294821560_1206767260110781_7154541486651384126_n.jpg
    294821560_1206767260110781_7154541486651384126_n.jpg
    910.2 KB · Views: 134
  • 294509708_1772581636422668_7851708290499295270_n.jpg
    294509708_1772581636422668_7851708290499295270_n.jpg
    819.5 KB · Views: 140
Don't mind my bathroom !!! I am working on my Noble Six for Comic Con.
Too hot for neck cover, am getting the top all tight and snug.
Thighs, Knees, Calf, Boots, and everything else is done, just need to fit it all.
 

Attachments

  • 20220729_204453.jpg
    20220729_204453.jpg
    639.8 KB · Views: 139
  • 20220729_204512.jpg
    20220729_204512.jpg
    586.6 KB · Views: 128
  • 20220729_204343.jpg
    20220729_204343.jpg
    793.7 KB · Views: 127
I'm working on updating some of the pieces and losing weight so ill post another picture relatively soon. I changed the knees out because they were annoying now I have the ones that attach to the calf piece so I don't have those flopping around, I printed both the thigh pieces and am finishing those up as well. I am also working on lights and changing the under suit, ill keep you posted, this is just a status update. (also I'm trying to figure out how to make it so my wrist pieces don't slide around so much, I don't really wanna suffocate my arm with foam but if that's the only way...)
 
here's an update on where I'm at.
I finished all the reprints and stuff I wanted to do for the old suit, all the pieces I wasn't happy with have been replaced by better parts. I also reprinted the entire chest and back because I can do it in less pieces due to a larger printer, and I'm doing it a little smaller to adjust for weight loss. I cant finish the chest and back until it warms up because I want to coat the inside with fiberglass resin to make sure it stays in one piece. I would like to wear the finished product to ECCC but it may not warm up in time, however I will have it done in time for RCCC. here's some pics. (also I'm starting an official cosplay club at Oregon state university if anyone goes there and is interested.)
321237531_1485688735261252_1481750409928972071_n.jpg
325153432_846802496552035_6651718223529145676_n.jpg
325176851_1148137199399480_5816469590332277586_n.jpg
325308840_1583592082063347_8332879090622678121_n.jpg
View attachment 326854
320931319_714548273514779_6332085717298441676_n.jpg
 
get_attachment_url
New chest I've been working on used filler primer and aton of sanding to get rid of print lines, putting blue on but it looks pretty good so far definatly an upgrade to the last chest, this one will probably be a part of my costume when i finally get ready to submit for a tier 3 deployment.
 
I have completed it, I am very happy with it. a lot of people are telling me I need to weather it and at some point maybe I will but for now this is it and its freaking awesome. ive come along way since my foam armor days and even my early 3d print days i know more now and have learned alot of costuming skills. i feel this costume hits the marks on most of my personal requirements, hope you all think the same, let me know
IMG_9748.JPG
what you think. and im sorry for some reason i didn't take any back pictures but i assure you the back is also dope, i have the lights. don't
IMG_9747.JPG
IMG_9746.JPG
IMG_9745.JPG
IMG_9744.JPG
IMG_9743.JPG
IMG_9741.JPG
IMG_9740.JPG
IMG_9739.JPG
IMG_9738.JPG
IMG_9737.JPG
IMG_9736.JPG
IMG_9735.JPG
(dont) be afraid to bring criticism. i want feedback also im aware of the seam in the front being less than perfect but i figure when i eventually do weathering i can make it look decent. i was comparing it to my last pictures from my previous 3d print build and its so much better ive also lost some weight so that looks better too, its fun to compare.
 
Last edited:
I have completed it, I am very happy with it. a lot of people are telling me I need to weather it and at some point maybe I will but for now this is it and its freaking awesome. ive come along way since my foam armor days and even my early 3d print days i know more now and have learned alot of costuming skills. i feel this costume hits the marks on most of my personal requirements, hope you all think the same, let me know View attachment 328345 what you think. and im sorry for some reason i didn't take any back pictures but i assure you the back is also dope, i have the lights. don'tView attachment 328346View attachment 328347View attachment 328348View attachment 328349View attachment 328350View attachment 328351View attachment 328352View attachment 328353View attachment 328354View attachment 328355View attachment 328356View attachment 328357 be afraid to bring criticism. i want feedback also im aware of the seam in the front being less than perfect but i figure when i eventually do weathering i can make it look decent. i was comparing it to my last pictures from my previous 3d print build and its so much better ive also lost some weight so that looks better too, its fun to compare.
Great looking Spartan, Awesome job!
 
I have completed it, I am very happy with it. a lot of people are telling me I need to weather it and at some point maybe I will but for now this is it and its freaking awesome. ive come along way since my foam armor days and even my early 3d print days i know more now and have learned alot of costuming skills. i feel this costume hits the marks on most of my personal requirements, hope you all think the same, let me know View attachment 328345 what you think. and im sorry for some reason i didn't take any back pictures but i assure you the back is also dope, i have the lights. don'tView attachment 328346View attachment 328347View attachment 328348View attachment 328349View attachment 328350View attachment 328351View attachment 328352View attachment 328353View attachment 328354View attachment 328355View attachment 328356View attachment 328357(dont) be afraid to bring criticism. i want feedback also im aware of the seam in the front being less than perfect but i figure when i eventually do weathering i can make it look decent. i was comparing it to my last pictures from my previous 3d print build and its so much better ive also lost some weight so that looks better too, its fun to compare.
THE BLUEEEEE IT LOOKS SO NICE!!!!
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top