First build - Jorge, Halo Reach

So I haven't posted in a while here in the forums. I've been busy building my armor and posting in Facebook. I modeled a functional hip pouch for a reach belt. I want to know how I can post the files somewhere here in the forums where fellow members can find it, download for free and print it.
This build looks absolutely amazing! I can't wait to see it done!!!!
 
So I haven't posted in a while here in the forums. I've been busy building my armor and posting in Facebook. I modeled a functional hip pouch for a reach belt. I want to know how I can post the files somewhere here in the forums where fellow members can find it, download for free and print it.
Its so clean!!! Nicely done!
 
Awesome! What glue did you use to bond the eva foam platform to the outer shoe sole?
I hot glue to bond the platforms to the rubber sole. I put a good glob down first to attach the two, then went back and filled all the gaps with hot glue. I used like 10 big sticks of hot glue to fill in every space I could.
 
It's been a while, but here is my progress as of 3/14/23. Slowly but surely I am getting there. Now on to the chest...

jorge progress 3-14a.jpg
jorge progress 3-14b.jpg
jorge progress 3-14c.jpg
jorge progress 3-14e.jpg
jorge progress 3-14f.jpg
 
I know it has been a while since I've posed anything here. I typically post progress pics on Facebook. I'm painting my biceps and shoulders now and down to the forearms, backpack and Etilka to finish out the build. getting close
 
Here is my torso build process
 

Attachments

  • 20230503_230513.jpg
    20230503_230513.jpg
    1.2 MB · Views: 74
  • 20230503_230432.jpg
    20230503_230432.jpg
    1.2 MB · Views: 65
  • 20230428_113922.jpg
    20230428_113922.jpg
    896.4 KB · Views: 70
  • 20230428_113857.jpg
    20230428_113857.jpg
    988.4 KB · Views: 62
  • 20230424_173741.jpg
    20230424_173741.jpg
    6.4 MB · Views: 74
  • 20230503_230458.jpg
    20230503_230458.jpg
    1.3 MB · Views: 68
  • 20230509_214110.jpg
    20230509_214110.jpg
    883.2 KB · Views: 58
  • 20230510_171932.jpg
    20230510_171932.jpg
    6.4 MB · Views: 68
Torso painting and testing fitting burrowing PipNinja's arms.
 

Attachments

  • received_796891645052650.jpeg
    received_796891645052650.jpeg
    293.5 KB · Views: 88
  • received_668891775071217.jpeg
    received_668891775071217.jpeg
    281.1 KB · Views: 77
  • 20230528_153444.jpg
    20230528_153444.jpg
    1.2 MB · Views: 90
  • 20230525_175047.jpg
    20230525_175047.jpg
    1.3 MB · Views: 63
  • 20230521_131125.jpg
    20230521_131125.jpg
    6.4 MB · Views: 69
  • 20230521_131121.jpg
    20230521_131121.jpg
    6.3 MB · Views: 65
  • 20230520_205704.jpg
    20230520_205704.jpg
    1,020.6 KB · Views: 75
Helmet print and finishing. Helmet shell is petg. The up-armor piece is pla. The Helmet has 3 cooling fans, 2 visor fans, lights with temple switch and locking relay, Bluetooth headset and temple switch to answer my phone, external mic connection (mics are in the chest), and Bluetooth PA system.
 

Attachments

  • 20230618_095245.jpg
    20230618_095245.jpg
    889.9 KB · Views: 63
  • 20230621_093223.jpg
    20230621_093223.jpg
    9 MB · Views: 59
  • 20230621_093313.jpg
    20230621_093313.jpg
    9.1 MB · Views: 64
  • 20230621_093408.jpg
    20230621_093408.jpg
    1.2 MB · Views: 63
  • 20230627_120922.jpg
    20230627_120922.jpg
    1.4 MB · Views: 73
  • 20230627_120928.jpg
    20230627_120928.jpg
    6.9 MB · Views: 77
  • 20230629_152125.jpg
    20230629_152125.jpg
    1.4 MB · Views: 70
  • 20230629_152127.jpg
    20230629_152127.jpg
    1.4 MB · Views: 69
  • 20230629_152147.jpg
    20230629_152147.jpg
    8.2 MB · Views: 71
  • 20230617_111337.jpg
    20230617_111337.jpg
    1.3 MB · Views: 62
  • 20230617_110601.jpg
    20230617_110601.jpg
    6.6 MB · Views: 78
  • 20230617_110501.jpg
    20230617_110501.jpg
    6.4 MB · Views: 69
  • 20230517_001214.jpg
    20230517_001214.jpg
    8.5 MB · Views: 65
  • 20230519_114239.jpg
    20230519_114239.jpg
    1.3 MB · Views: 75
  • 20230531_160941.jpg
    20230531_160941.jpg
    842.8 KB · Views: 60
  • 20230607_122502.jpg
    20230607_122502.jpg
    1.6 MB · Views: 61
  • 20230612_085218.jpg
    20230612_085218.jpg
    5.7 MB · Views: 60
  • 20230612_085210.jpg
    20230612_085210.jpg
    1.4 MB · Views: 59
  • 20230612_141927.jpg
    20230612_141927.jpg
    6.4 MB · Views: 63
  • 20230612_141919.jpg
    20230612_141919.jpg
    6.2 MB · Views: 58
  • 20230613_123654.jpg
    20230613_123654.jpg
    5.8 MB · Views: 64
Biceps and shoulder build. Both are freehand/built from scratch.
 

Attachments

  • 20230724_151346.jpg
    20230724_151346.jpg
    9 MB · Views: 54
  • 20230724_151326.jpg
    20230724_151326.jpg
    8.9 MB · Views: 57
  • 20230724_151315.jpg
    20230724_151315.jpg
    6.1 MB · Views: 65
  • 20230724_133351.jpg
    20230724_133351.jpg
    9.6 MB · Views: 56
  • 20230724_093212.jpg
    20230724_093212.jpg
    1.1 MB · Views: 62
  • 20230719_181250.jpg
    20230719_181250.jpg
    8.5 MB · Views: 50
  • 20230719_181255.jpg
    20230719_181255.jpg
    9.5 MB · Views: 46
  • 20230719_181259.jpg
    20230719_181259.jpg
    6.4 MB · Views: 48
  • 20230612_141906.jpg
    20230612_141906.jpg
    1 MB · Views: 47
  • 20230612_141855.jpg
    20230612_141855.jpg
    936.3 KB · Views: 55
This is turning out so well. Interesting what you have going on in there with the bike helmet and the headset, looks super secure and functional.

How is the stability of your boots? I've seen other builds basically make EVA foam pumps and I wondered if it might be too squishy, especially while walking around in armor. I was thinking about using calto shoes but yours turned out so well that now I'm second guessing
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top